| Location: | Mississippi |
|---|---|
| Posted: | Oct 30, 2026 |
| Due: | Nov 13, 2026 |
| Agency: | State Government of Mississippi |
| Type of Government: | State & Local |
| Category: |
|
| Solicitation No: | 9250-27-R-RFIN-00030 |
| Publication URL: | To access bid details, please log in. |
Procurement Details
| Smart Number | 9250-27-R-RFIN-00030 | Advertised Date | 10/30/2026 12:00 AM |
| RFx # | 3150007094 | Submission Date | 11/13/2026 12:00 AM |
| RFx Status | Open | Major Procurement Category | COMMODITIES |
| RFx Opening Date | 11/13/2026 12:00 AM | Sub Procurement Category | EQUIPMENT - TECHNOLOGY |
| RFx Type | Req. for Information | ||
| Agency | MISSISSIPPI STATE UNIVERSITY | ||
| RFx Description | SOLE SOURCE REQUEST TO PURCHASE ALICAT SYSTEM KITS | ||
| Name | Debra Raines | draines@procurement.msstate.edu | |
| Phone | Fax |
| PRODUCT CATEGORY | PRODUCT DESCRIPTION |
| 49043 | Lab Eqpmt-Lab & Scie |
| VENDOR NAME | VENDOR NUMBER | AWARD DATE | AWARD AMOUNT | FUNDING SOURCE |
|
Attachments
Notice |
| Alicat MX-ES-SA-BGA-Kit (Alicat MXM-ES-SA Benchtop gas mixing system kit for arc-DED weld cell integration) | Parts kit for welding cell gas mixer, with top cover, housing, base plate, internal GMB board, power supply, cables and integrated binary gas analyzer. |
|---|---|
| Alicat MC-50SLPM-D-PCV50-MXM Mass flow controllers | Mass Flow Controller, 0-50 SLPM, Display, Industrial Connector, 0.050" Small Valve, for MXM-SA |
| Alicat MC-2SLPM-D-PCV10-MXM-SA/5M, RIN, 5IN, GAS: CO2, VC[IP4], PUSP: 0, TOT (9999.999, R), P1: 50 PSIG, P2: ATM, DS | Mass Flow Controller, 0 - 2 SLPM, Display, .010" Valve, for MXM-SA for tri-mix |
| Alicat P-30PSIG-O-ST-MIXMOD-MXM- 411411/5P | Pressure Gauge, 0 - 30 PSIG, No Display, with Selco Temperature Sensor, Mix Module, using 411411 manifolds, for MXM systems |
| Alicat 210075 MXM Module | Module - USB Digital I/O interface box for turnkey systems |
| Alicat IC302 Cables | Cable - Industrial 30' Double Ended Male required for integration of the MXM gas flow controllers into the existing MSU CAVS weld cell. |
Mississippi State University
Notice of Proposed Sole Source Purchase
267-060
Mississippi State University anticipates purchasing the item(s) listed below as a
sole source purchase. Anyone objecting to this purchase shall follow the
procedures outlined below.
1. Commodity or commodities to be purchased (make, model, description):
Alicat MX-ES-SA-BGA-Kit (Alicat MXM-ES-SA Parts kit for welding cell gas mixer, with top
Benchtop gas mixing system kit for arc-DED cover, housing, base plate, internal GMB
weld cell integration) board, power supply, cables and integrated
binary gas analyzer.
Alicat MC-50SLPM-D-PCV50-MXM Mass flow Mass Flow Controller, 0-50 SLPM, Display,
controllers Industrial Connector,
0.050" Small Valve, for MXM-SA
Alicat MC-2SLPM-D-PCV10-MXM-SA/5M, Mass Flow Controller, 0 - 2 SLPM, Display,
RIN, 5IN, GAS: CO2, VC[IP4], PUSP: 0, .010" Valve, for
TOT (9999.999, R), P1: 50 PSIG, P2: ATM, DS MXM-SA for tri-mix
Alicat P-30PSIG-O-ST-MIXMOD-MXM- Pressure Gauge, 0 - 30 PSIG, No Display, with
411411/5P Selco Temperature Sensor, Mix Module,
using 411411 manifolds, for MXM systems
Alicat 210075 MXM Module Module - USB Digital I/O interface box for
turnkey systems
Alicat IC302 Cables Cable - Industrial 30' Double Ended Male
required for integration of the MXM gas flow
controllers into the existing MSU CAVS weld
cell.
2. Explanation of the need to be fulfilled by this item(s), how is it unique from all other
options, and why it is the only one that can meet the specific needs of the department:
The Additive Manufacturing Laboratory at CAVS requires a benchtop, remotely controlled gas
mixing system to supply shielding gas of controlled composition to our wire arc directed energy
deposition (arc-DED) system. Shielding gas composition affects arc stability, heat input, bead
geometry, and microstructure. Research on process-structure-property relationships and in situ
monitoring therefore requires that composition be set accurately, changed programmatically
between and within builds, and recorded as process data in flexible integration paths.
Alternative gas mixing solutions lack remote control and logging, which is critical for on-going
research. The Alicat MXM meets these needs in the following ways:
* Scalable blending in a single benchtop unit: Ability to add additional/reconfigure mass
flow controller layout for different research configuration.
* Mass-flow based control: Alicat mass flow controllers use laminar differential pressure
technology to measure mass flow, volumetric flow, absolute pressure, and temperature
in real-time, with ultra-fast response time.
* Integrated binary gas analyzer: factory integrated, monitors and verifies the
composition/quality of binary welding gas compositions
* Remote, digital control: Ability to communicate with external in situ data collection via
IoT and communicate with industrial process equipment through direct digital signals.
3. Name of company/individual selling the item and why that source is the only possible
source that can provide the required item(s):
The equipment outlined above is available solely from Alicat Scientific, Inc. and the company
sells its equipment directly to customers. There is no separate distribution channel, or value-
added resellers, which can provide this equipment. Founded in 1991, Alicat Scientific, Inc. is a
leading manufacturer of precision mass flow and pressure instrumentation used in scientific
discovery, research laboratories, and industrial automation. They are headquartered in Tucson,
Arizona, and have been a subsidiary of Halma plc since November 2010.
4. Estimated cost of item(s) and an explanation why the amount to be expended is
considered reasonable:
The quote provided by Alicat Scientific, Inc if for $26,585.75. This quote includes a 5.0%
educational discount. The addition of a gas mixing system on the existing weld cell allows for
additional research capabilities in weld shielding gas, ability to create novel gas mixes on the fly,
and reduce operational costs over time by using bulk gases and mixing at the point of need.
Souring pre-mixed gas shielding and retaining them on hand more than 40% of this system
yearly.
5. Explanation of the efforts taken by the department to determine this is the only source
and the efforts used to obtain the best possible price:
MSU personnel are experts in metal-based additive manufacturing, specifically instrumentation
and hardware for wire arc additive manufacturing. Therefore, they are well aware of all
hardware manufacturers in the industry. As stated in the justification above, there are no other
vendors for Alicat Scientific, Inc. equipment. Other gas mixing solutions exist, but do not allow
software integration/sensing/custom mixing or the precision/validation required for
fundamental research. This type of equipment and integration for research requires custom
integration, with small profit margins, but Alicat Scientific, Inc. has provided a 5% discount.
Any person or entity that objects and proposes that the commodity listed is not sole source and
can be provided by another person or entity shall submit a written notice to:
Jennifer Mayfield, CPPO
Director of Procurement Services, Chief Procurement Officer
jmayfield@procurement.msstate.edu
Subject Line must read "Sole Source Objection"
The notice shall contain a detailed explanation of why the commodity is not a sole source
procurement. Appropriate documentation shall also be submitted if applicable.
If after a review of the submitted notice and documents, MSU determines that the commodity
in the proposed sole source request can be provided by another person or entity, then MSU will
withdraw the sole source request publication from the procurement portal website and submit
the procurement of the commodity to an advertised competitive bid or selection process.
If MSU determines after review that there is only one (1) source for the required commodity,
then MSU will appeal to the Public Procurement Review Board. MSU will have the burden of
proving that the commodity is only provided by one (1) source.

With GovernmentContracts, you can:
Solicitation Title Deadline Date Deadline Time Documents Types Bid File - 1307 JCW
University of Mississippi.
Bid Due: 11/19/2026
Procurement Details Smart Number 1711-27-R-RFIN-00004 Advertised Date 11/13/2026 12:00 AM RFx # 3150007092
State Government of Mississippi
Bid Due: 12/08/2026
Procurement Details Smart Number 1941-27-R-IFBD-00021 Advertised Date 11/12/2026 9:00 AM RFx # 3160008401
State Government of Mississippi
Bid Due: 12/03/2026
Solicitation Submission Deadline Request Documents and Specifications SSP 27_015 EdSights 12/1/26 8:00 PM
University of Southern Mississippi
Bid Due: 12/01/2026