DOBOR Commercial Decals 2028

DOBOR Commercial Decals 2028 - Job No. 26.10
Scope of Work - The contractor shall provide all labor and material as specified herein. A
mailed physical copy of a "proof" is required prior to providing the notice to proceed at no
additional cost.
Description - The reflective sheeting shall consist of lens elements enclosed within a
transparent resin and shall have a pre-coated pressure sensitive adhesive backing protected by
a removable liner. The retro reflective sheeting shall provide a weather resistant, essentially
smooth, flat, outer surface when finished with material in the manner recommended by the retro
reflective sheeting manufacturer.
Retro Reflective Sheeting Requirements
A. Reflective Characteristics
1. The unprinted retro reflective sheeting shall have the following minimum
brightness values expressed as average candlepower per square foot of
material. Measurements shall be conducted in accordance with the reflective
intensity testing procedures for reflective sheeting specified in Federal
Specification LA-300C, "Sheeting and Tape, Reflective: Non-Exposed Lens,
Adhesive Backing", Para. 4.4.7.
White
Observation Angles 0.2 0.5
Entrance Angles -4 30.0 18.0
40 6.0 5.0
2. Rainfall Performance
The brightness of the sheeting, totally wet by rain, shall not be less than 90% of
the above values. Wet performance measurements shall be conducted at 0.2
observation and -4 entrance in accordance with the Rainfall Test Method
specified in Federal Specification LS-300C, "Sheeting and Tape Reflective: Non-
Exposed Lens, Adhesive Backing", Para. 4.4.9.4.
B. Adhesive
1. The pre-coated pressure sensitive adhesive shall form a durable vandal resistant
bond to clean, dry, painted, varnished, fiberglass, aluminum, or steel surfaces.
Surfaces may be moderately rough, pitted or waxed.
2. The protective liner attached to the adhesive shall be removed by peeling without
soaking in water or other solvents and shall be easily removed after accelerated
storage for four hours at 150 degreesF under weight of 2.5 lbs. per square inch.
3. The adhesive shall not exude from edges of the sheeting when processed into
the finished decal so as to cause stacked pieces to stick together during
shearing, cutting, printing, handling, or while packaged in shipment and
distribution.
1

DOBOR Commercial Decals 2028 - Job No. 26.10
C. Film
1. The sheeting shall have a similar diffuse (daytime) and reflected (nighttime)
color.
2. The sheeting surface shall be readily cut/die cut without cracking, or flaking, and
shall be compatible with transparent or opaque inks and protective finishing clear
as designed and supplied by the reflective sheeting manufacturer for decal
fabrication.
3. The decals processed and applied in accordance with the recommendations of
the reflective sheeting manufacturer shall be easily cleansed of normal direct
accumulation by washing with water and mild detergent. The surface shall be
sufficiently solvent resistant to permit cleaning with solvents such as VW&P
Naphtha, mineral spirits, turpentine, and other solvents commonly used on
vessel finishes. Rinsed and dried, the surface shall show no appreciable change
following cleaning when compared to a new clean decal surface.
4. Protective finished clear coating shall remain clear and durable as well as
provide a compatible surface for direct application of additional registration
decals.
D. Physical Characteristics
Retro reflective sheeting shall be free from ragged edges, cracks, and blisters and be
packaged in accordance with accepted commercial standards. Decals shall have a
service life of a minimum of twelve (12) months.
Fabrication Requirements
E. Vector Files
No vector files. Vector files will not be provided.
A. Annual Commercial Decals (Item No. 1)
1. Design, Color and Size
The size, shape and design of the decals, as well as the size and position of all
printing, shall be in strict conformity with the attached sample and the following
requirements.
The commercial registration decals shall have a background sheeting of
"Confirm" Brand Security Film No. 4230 (white). The border and wording shall be
reversed printed with "Scotchlite" Brand Transparent Process Red or a material
of equal quality. Finished decals must be clear coated with "Scotchlite" Brand
Clear Coat No. 270 or a material of equal quality.
All wording and numeric shall be printed with "Scotchlite" Brand Process Color
No. 200 (black) or a material of equal quality. The month shall be followed by a
slash "/" and the year "28".
2

DOBOR Commercial Decals 2028 - Job No. 26.10
The dimensions of each decal shall be three inches (3.0") in diameter.
The adhesive protective liner on sheeting intended for fabrication of individual
decals shall be scored at or near the center of each sticker for easy removal.
2. Serial Number
Decals shall be manufactured in pairs, and each pair shall have identical serial
numbers and must be easily separated.
Each pair of decals shall be printed with a serial number running consecutively
from E00001 to E09200 for 2028. The serial number shall be printed with
"Scotchlite" Brand Process Color No. 200 (black) or a material of equal quality.
(See attached illustration, Item No. 1)
3. Quantity
Month Beginning Ending Amount
Decal Decal (pairs)
Number Number
1 E00001 E00600 600
2 E00601 E01300 700
3 E01301 E01900 600
4 E01901 E02600 700
5 E02601 E03600 1000
6 E03601 E05100 1500
7 E05101 E05600 500
8 E05601 E06200 600
9 E06201 E06900 700
10 E06901 E07600 700
11 E07601 E08300 700
12 E08301 E09200 900
Blank Decals (Item No. 2)
The month on the remaining 800 pairs of decals shall be left blank, (w/year "28"
imprinted on the decals).
Month Beginning Ending Amount
(Blank) Decal Decal (pairs)
Number Number
E09201 E10000 800
B. Annual Tow-In Decals (Item No. 3)
1. Design, Color and Size
The size, shape and design of the decals, as well as the size and position of all
printing, shall be in strict conformity with the attached sample and the following
requirements.
3

DOBOR Commercial Decals 2028 - Job No. 26.10
The annual tow-in decals shall have a background sheeting of "Confirm" Brand
Security Film No. 4230 (white). The border shall be reversed printed with
"Scotchlite" Brand Transparent Process Red or a material of equal quality.
Finished decals must be clear coated with "Scotchlite" Brand Clear Coat No. 270
or a material of equal quality.
The "month number" shall be followed by a slash, the year of the decal expiration
shall be "28". All wording and numeric shall be printed with "Scotchlite" Brand
Process Color No. 200 (black) or a material of equal quality.
The dimensions of each decal shall be three inches (3.0") per side.
The adhesive protective liner on sheeting intended for fabrication of individual
decals shall be scored at or near the center of each sticker for easy removal.
2. Serial Number
Decals shall be manufactured in pairs, and each pair shall have identical serial
numbers and must be easily separated.
Each pair of decals shall be printed with a serial number running consecutively
from E10001 to E11100 for 2028. The serial number shall be printed with
"Scotchlite" Brand Process Color No. 200 (black) or a material of equal quality.
(See attached illustration, Item No. 3).
3. Quantity
Month Beginning Ending Amount
Decal Decal (pairs)
Number Number
8 E10001 E11100 1100
Application Instruction
Application instructions shall be printed on the BACK of each pair of decals. See
attached samples (Item No. 1, Item No. 2, Item No. 3) for printing of application
instructions.
Item No. 1/Item No. 2
4

DOBOR Commercial Decals 2028 - Job No. 26.10
Item No. 3
C. Responsibility
The successful sheeting bidder shall furnish all inks, clear coating, and thinners needed
to produce decals meeting the requirements of this specification.
D. Security Measures
The Contractor must provide adequate security methods and supervision to protect
decals from hazard or loss. A complete description of the plant security precautions
must accompany each bid. The State reserves the right to enter the vendor's premises
at any time during the production of decals to inspect the progress of production, the
quality of workmanship, and the adequacy of security.
E. Workmanship
All workmanship shall be first class and done in accordance with generally accepted
decal manufacturing standards.
F. Warranty
The decal manufacturer shall certify that all decals furnished conform to the
specifications herein. The decal manufacturer shall replace all defective decals without
further expense to the State.
G. Packaging
Decals shall be packaged and shipped in such a manner as to prevent sticking or
damaging of printed surface while in transit or in storage.
H. Delivery
Delivery shall be made within thirty (30) calendar days from the date indicated in the
Notice to Proceed to the below address. If delivery deadline falls on a weekend or State
holiday, delivery shall be made by 4:00pm on the next business day.
State of Hawaii, DOBOR
Oahu District Office
4 Sand Island Access Road
Honolulu, Hawaii 96819
I. Payment
Payment shall be made in lump sum to the vendor awarded the contract after completion
of the terms of the contract are fulfilled. Payment shall include labor, materials, State
5

DOBOR Commercial Decals 2028 - Job No. 26.10
and Federal taxes and delivery costs.
J. Guarantee
The vendor shall submit a statement guaranteeing that the decals they furnished will be
free of any defective material of workmanship for a period of 12 months from the date of
delivery. The vendor shall further agree to furnish, at no cost to the State, labor and
materials for replacement decals in which defects appear within the guarantee period.
6

DOBOR Commercial Decals 2028 - Job No. 26.10
ITEM NO. 1
ANNUAL COMMERCIAL MONTH DECAL
(FRONT)
FRONT
3"
6"
BACK
(BACK)
HOW TO APPLY HOW TO APPLY
READ APPLICATION READ APPLICATION
REFLECTIVE INSTRUCTIONS REFLECTIVE INSTRUCTIONS
CAREFULLY CAREFULLY
BEFORE APPLYING BEFORE APPLYING
1. One set of decals per item. 1. One set of decals per item.
2. Choose decal location. 2. Choose decal location.
3. Be sure surface where decal is to 3. Be sure surface where decal is to
be mounted is clean. be mounted is clean.
4. Peel off protective backing paper. 4. Peel off protective backing paper.
5. Position decal and squeegee down 5. Position decal and squeegee down
firmly. firmly.
7

DOBOR Commercial Decals 2028 - Job No. 26.10
ITEM NO. 2
ANNUAL COMMERCIAL BLANK DECAL
(FRONT)
3"
6"
(BACK)
READ APPLICATION READ APPLICATION
REFLECTIVE I
C
N
A
S
R
T
E
R
F
U
U
C
L
T
L
IO
Y
NS REFLECTIVE I
C
N
A
S
R
T
E
R
F
U
U
C
L
T
L
IO
Y
NS
BEFORE APPLYING BEFORE APPLYING
1. One set of decals per item. 1. One set of decals per item.
2. Choose decal location. 2. Choose decal location.
3. Be sure surface where decal is to 3. Be sure surface where decal is to
be mounted is clean. be mounted is clean.
4. Peel off protective backing paper. 4. Peel off protective backing paper.
5. Position decal and squeegee down 5. Position decal and squeegee down
firmly. firmly.
8

DOBOR Commercial Decals 2028 - Job No. 26.10
ITEM NO. 3
ANNUAL TOW-IN DECAL
(FRONT)
3"
6"
(BACK)
HOW TO APPLY HOW TO APPLY
Affix one decal to each side Affix one decal to each side
of thrill craft 1" aft of thrill craft 1" aft
(toward the stern) and in line (toward the stern) and in line
with the registration decals. with the registration decals.
9