Wastewater Treatment Plant Polymer IFB

Location: North Dakota
Posted: Aug 21, 2026
Due: Nov 3, 2026
Agency: City of Bismarck
Type of Government: State & Local
Category:
  • 68 - Chemicals and Chemical Products
  • Z - Maintenance, Repair or Alteration of Real Property
Publication URL: To access bid details, please log in.
Bid Title: Wastewater Treatment Plant Polymer IFB
Category: Public Works
Status: Open
Description:

The City of Bismarck is seeking cost proposals for dewatering polymer from qualified vendors for use with the City of Bismarck’s solid waste processing equipment at the Wastewater Treatment Facility. The product must meet or exceed the Solenis K274FLX performance and be shown to be equal to or more economical to use based on cost per dry ton of biosolids produced. The enclosed trial procedures and specifications provide parameters by which the City will accept submissions. Vendors must comply with all trial, testing, and specifications as noted.

Vendors must provide the following information and supporting documentation to the City of Bismarck by 3:00 pm CST on Tuesday, November 3, 2026. Cost proposals will be publicly opened and reviewed at 4:00 pm CST on Tuesday, November 3, 2026. To be eligible for consideration, the cost proposal must contain the following:

  • Bid Sheets indicating unit price per pound of polymer(s) delivered to the Bismarck Wastewater Treatment Facility. The price shall be all inclusive of shipping, delivery charges, etc. All fuel surcharges must be included as part of the bid amount submitted.
  • The Safety Data Sheet (SDS) and Technical Data Sheet (TDS) of the proposed polymer(s).
  • Documentation from the City of Bismarck Wastewater Treatment Facility indicating approval and satisfactory performance of the polymer(s) per the Trial Procedures and Specifications section.
  • Supporting documentation indicating the ability of the vendor to meet the product delivery requirements.
  • Information regarding the ability to fulfill training and support requirements.

Bids must be submitted on blanks furnished by the City of Bismarck and in accordance with specifications and conditions therein contained. Copies of bid blanks and specifications may be obtained from Public Works Utility Operations, 601 South 26th Street, Bismarck, ND 58504, by contacting Amber Araujo at For security reasons, you must enable JavaScript to view this E-mail address. or 701-355-1700 option 4, or can be downloaded at https://www.bismarcknd.gov/bids.aspx . All bidders are invited to be present at the opening.

The right is reserved to hold all bids for a period of thirty (30) days, to reject any or all bids, and to waive technicalities or to accept such as may be determined in the best interest of the City of Bismarck.

WWTP Polymer IFB

Publication Date/Time:
8/11/2026 3:00 AM
Publication Information:
Bismarck Tribune 8/11, 8/18, 8/25
Closing Date/Time:
11/3/2026 3:00 PM
Submittal Information:
Deadline for Submission: November 3, 2026 at 3:00pm CST
Bid Opening Information:
November 3, 2026 at 4:00pm CST
Contact Person:
Amber Araujo, 701-355-1700 x 4, pwutility@bismarcknd.gov
Business Hours:
8:00am to 5:00pm M-F
Special Requirements:
Bids may be rejected if they show any alteration of form, additions not called for, conditional or alternate cost proposals, incomplete cost proposals, irregularities of any kind, or if they contain a clause in which the vendor reserves the right to accept or reject a contract awarded to him. Bids in which the prices are obviously unbalanced or are otherwise regular which are not accompanied by satisfactory requirements will be rejected.

Purchases by the City of Bismarck are not subject to the North Dakota State Sales Tax.

Successful full-scale testing per the Trial Procedures and Specifications Section is required to be complete prior to cost proposal submission.

The award shall be based on price and performance of the specified polymer(s) or approved equal polymers (lowest overall polymer cost per dry ton of biosolids produced based on the price per pound of polymer and the tested polymer consumption). The highest solids capture rate, highest cake solids, and lowest filtrate solids obtained during the plant trials by the City will be considered as part of the overall analysis and award, in addition to the provisions outlined in this request.

Any accepted bid because of this solicitation is not exclusive. The City reserves the right to test competitive products at any time to allow the City to remain current with polymer technology and perform background work with other products.

The unit price bid shall reflect the total cost of the delivered chemical to the Bismarck Wastewater Treatment Facility or other specified location. No additional charges or surcharges will be allowed during the life of the agreement. A good faith effort has been made to provide estimated quantities, however, the City does not guarantee a specific quantity of polymer that will be purchased.

Related Documents:

Attachment Preview

City of Bismarck
221 North 5th Street
P.O. Box 5503
Bismarck, ND 58506
IFB
BIOSOLIDS
DEWATERING
POLYMER
ISSUED August 11, 2026
SUBMISSION DEADLINE November 3, 2026, at 3:00 pm CST
BID OPENING November 3, 2026, at 4:00 pm CST
DEPARTMENT Public Works Utility Operations WWTP

IFB: Biosolids Dewatering Polymer C i t y o f B i s m arck: Wastewater Treatment Plant
TABLE OF CONTENTS
INVITATION TO BID .............................................................................................................................. 1
Invitation TO Bid (IFB): Biosolids Dewatering Polymer...................................................................... 1
Schedule ............................................................................................................................................. 1
Submittal Instructions ......................................................................................................................... 2
SPECIAL PROVISIONS ........................................................................................................................ 2
GENERAL SPECIFICATIONS ............................................................................................................... 3
Process Overview........................................................................................................................... 3
Quantity of Product ......................................................................................................................... 3
Quality of Product ........................................................................................................................... 4
Cost Performance........................................................................................................................... 4
Training/Support Services .............................................................................................................. 5
Term ............................................................................................................................................... 5
Price ................................................................................................................................................ 5
Payment.......................................................................................................................................... 6
TRIAL PROCEDURES AND SPECIFICATIONS .................................................................................. 6
Preliminary Jar Testing (recommended) ................................................................................... 6
Full-Scale Testing (required) ....................................................................................................... 7
EVALUATION CRITERIA ...................................................................................................................... 7
Field Trial Performance Run Sampling .......................................................................................... 7
Trial Parameters ............................................................................................................................. 7
Trial Samples .................................................................................................................................. 8
OTHER INFORMATION ........................................................................................................................ 8
Modifications to the Request .......................................................................................................... 8
Multiple Award Reservation............................................................................................................ 9
Communications ............................................................................................................................. 9
Responsibility for Proposal/Bid Preparation ................................................................................... 9
Civil Rights ...................................................................................................................................... 9
No Conflict of Interest ................................................................................................................... 10
Open Records/Proprietary Information ........................................................................................ 10
BIOSOLIDS DEWATERING POLYMER BID SHEETS ....................................................................... 11

Event/Process Date(s)
IFB Issued August 11, 2026
Timeframe for Preliminary Jar Testing August 10, 2026, through October 2, 2026 Between 8:00 am CST and 3:00 pm CST

IFB: Biosolids Dewatering Polymer C i t y o f B i s m arck: Wastewater Treatment Plant
INVITATION TO BID
INVITATION TO BID (IFB): BIOSOLIDS DEWATERING POLYMER
The City of Bismarck is seeking cost proposals for dewatering polymer from qualified vendors for use
with the City of Bismarck's solid waste processing equipment at the Wastewater Treatment Facility.
The product must meet or exceed the Solenis K274FLX performance and be shown to be equal to or
more economical to use based on cost per dry ton of biosolids produced. The enclosed trial procedures
and specifications provide parameters by which the City will accept submissions. Vendors must
comply with all trial, testing, and specifications as noted.
Vendors must provide the following information and supporting documentation to the City of Bismarck
by 3:00 pm CST on Tuesday, November 3, 2026. Cost proposals will be publicly opened and reviewed
at 4:00 pm CST on Tuesday, November 3, 2026. To be eligible for consideration, the cost proposal
must contain the following:
* Bid Sheets indicating unit price per pound of polymer(s) delivered to the Bismarck Wastewater
Treatment Facility. The price shall be all inclusive of shipping, delivery charges, etc. All fuel
surcharges must be included as part of the bid amount submitted.
* The Safety Data Sheet (SDS) and Technical Data Sheet (TDS) of the proposed polymer(s).
* Documentation from the City of Bismarck Wastewater Treatment Facility indicating approval
and satisfactory performance of the polymer(s) per the Trial Procedures and Specifications
section.
* Supporting documentation indicating the ability of the vendor to meet the product delivery
requirements.
* Information regarding the ability to fulfill training and support requirements.
Bids must be submitted on blanks furnished by the City of Bismarck and in accordance with
specifications and conditions therein contained. Copies of bid blanks and specifications may be
obtained from Public Works Utility Operations, 601 South 26th Street, Bismarck, ND 58504, by
contacting Amber Araujo at pwutility@bismarcknd.gov or 701-355-1700 option 4, or can be
downloaded at https://www.bismarcknd.gov/bids.aspx. All bidders are invited to be present at the
opening.
The right is reserved to hold all bids for a period of thirty (30) days, to reject any or all bids, and to
waive technicalities or to accept such as may be determined in the best interest of the City of Bismarck.
SCHEDULE
The schedule of the IFB issuance and evaluation process is intended to occur as follows. This
schedule may be revised by the Department Director or Wastewater Treatment Facility Superintendent
to accommodate unforeseen circumstances or contract negotiations.
Event/Process Date(s)
IFB Issued August 11, 2026
August 10, 2026, through October 2, 2026
Timeframe for Preliminary Jar Testing
Between 8:00 am CST and 3:00 pm CST
1

Timeframe for Required Full-Scale Testing September 14, 2026, through October 23, 2026 Between 8:00 am CST and 3:00 pm CST
Bid Deadline November 3, 2026, at 3:00 pm CST
Bid Opening November 3, 2026, at 4:00 pm CST
Contract Approval by Commission November 24, 2026
Notices to Vendors November 25, 2026
Implementation Date January 1, 2026

IFB: Biosolids Dewatering Polymer C i t y o f B i s m arck: Wastewater Treatment Plant
Timeframe for Required Full-Scale September 14, 2026, through October 23, 2026
Testing Between 8:00 am CST and 3:00 pm CST
Bid Deadline November 3, 2026, at 3:00 pm CST
Bid Opening November 3, 2026, at 4:00 pm CST
Contract Approval by Commission November 24, 2026
Notices to Vendors November 25, 2026
Implementation Date January 1, 2026
SUBMITTAL INSTRUCTIONS
Bids shall be sealed and endorsed "Biosolids Dewatering Polymer 2027" and must be received by the
City of Bismarck no later than 3:00 pm CST on Thursday, November 3, 2026. Bids received after this
deadline will not be accepted. Send direct questions regarding the IFB to Travis Carufel at
pwutility@bismarcknd.gov or 701-355-1700 option 4.
Mail - City of Bismarck IFB In Person - City of Bismarck IFB
Biosolids Dewatering Polymer 2027 Biosolids Dewatering Polymer 2027
PO Box 5503 City Administration
Bismack, ND 58506-5503 221 North 5th Street
Bismarck, ND 58501
SPECIAL PROVISIONS
Bids may be rejected if they show any alteration of form, additions not called for, conditional or
alternate cost proposals, incomplete cost proposals, irregularities of any kind, or if they contain a
clause in which the vendor reserves the right to accept or reject a contract awarded to him. Bids in
which the prices are obviously unbalanced or are otherwise regular which are not accompanied by
satisfactory requirements will be rejected.
Purchases by the City of Bismarck are not subject to the North Dakota State Sales Tax.
Successful full-scale testing per the Trial Procedures and Specifications Section is required to be
complete prior to cost proposal submission.
The award shall be based on price and performance of the specified polymer(s) or approved equal
polymers (lowest overall polymer cost per dry ton of biosolids produced based on the price per pound
of polymer and the tested polymer consumption). The highest solids capture rate, highest cake solids,
and lowest filtrate solids obtained during the plant trials by the City will be considered as part of the
overall analysis and award, in addition to the provisions outlined in this request.
Any accepted bid because of this solicitation is not exclusive. The City reserves the right to test
competitive products at any time to allow the City to remain current with polymer technology and
perform background work with other products.
2

IFB: Biosolids Dewatering Polymer C i t y o f B i s m arck: Wastewater Treatment Plant
The unit price bid shall reflect the total cost of the delivered chemical to the Bismarck Wastewater
Treatment Facility or other specified location. No additional charges or surcharges will be allowed
during the life of the agreement. A good faith effort has been made to provide estimated quantities,
however, the City does not guarantee a specific quantity of polymer that will be purchased.
GENERAL SPECIFICATIONS
PROCESS OVERVIEW
The Bismarck Wastewater Treatment Facility is a Biological Trickling filter plant which consists of
primary and secondary clarification. Primary and secondary sludge is digested in two anaerobic
mesophilic digesters. Ferric chloride is injected upstream of the digesters for H2S control.
The anaerobically digested sludge is fed and dewatered through an FKC Screw Press at a rate of
60gpm. Emulsion polymer delivered in totes will be mixed down through the existing Velodyne
Polyblend system and injected into the floc tank preceding the screw press to aid in the conditioning
of the sludge.
The required guidelines for performance of polymer(s) to be eligible for consideration for approval with
jar testing and Full-Scale on-site testing are as follows:
* Biosolids feed volume of approximately 60 GPM from anerobic digester to screw press
* 85 percent min. solids capture rate
* 20 percent min. cake solids
The analysis for cake dryness, press influent Total solids, and filtrate Total solids will be performed by
the City and will conform to accepted practices as indicated by the latest edition of "Standard Methods
for the Examination of Water and Wastewater" and the City Standard Operating Procedure for Screw
Press Sampling and Laboratory Routine. Polymer(s) that do not meet the above required guidelines
are not eligible for submission as part of this IFB process.
QUANTITY OF PRODUCT
The quantities listed are estimates based on prior years' usage and are not a guarantee for any order,
quantity, item, or dollar volume. The average polymer usage by the City throughout a calendar year is
approximately 8000 gallons with around 1000 tons of biosolids processed annually. The polymer shall
be delivered in 275-gallon totes to the City of Bismarck Wastewater Facility by a truck designed to
safely handle and unload at the plant. The City anticipates ordering a quantity of 10 to 14 totes each
order.
The successful vendor will be required to have the ability to deliver a minimum of 4 totes within 10
business days of purchase order. If the materials are unavailable from vendor's stock, it shall be the
vendor's responsibility to obtain the same polymer(s) from some other source.
In the event the awarded vendor cannot secure the materials as noted above, the City shall have the
option to obtain the required polymer(s) from an independent source.
3

IFB: Biosolids Dewatering Polymer C i t y o f B i s m arck: Wastewater Treatment Plant
Vendor's failure to provide polymers of the proper quantity will constitute a breach of this agreement,
for which the City may seek alternative sources of suitable materials at the vendor's expense and
remedies herein or other remedies as otherwise available. The City shall not be responsible for the
payment of compensation to the vendor for the deliveries of polymer substitutions which do not
substantially conform to the specifications stated herein.
QUALITY OF PRODUCT
The Product Specifications from the manufacturer's Technical Data Sheet submitted by the vendor
shall be considered part of this IFB. During the term of this agreement, the successful vendor will
ensure that the manufacturer's specification for product(s) will not vary or change. Each delivery may
be sampled and tested to confirm compliance with the specifications of the product ordered. The City,
at the discretion of the Wastewater Treatment Facility staff, may order an enhanced polymer due to
changes in sludge quality.
The enhanced polymer must meet criteria noted in the Cost Performance section and cannot exceed
ten percent of the price per pound for the approved polymer established during the Trial Procedures
and Specifications section.
If at any time during the term of the agreement, the polymer(s) is found to be consistently out of product
specification ordered, the City will notify the vendor in writing of the problem and will request remedial
action.
If any delivery is determined to be out of specification, the City reserves the right to either reject the
shipment or to be appropriately credited by the vendor for the discrepancy. The City reserves the right
to terminate the agreement for noncompliance if the problem is not corrected promptly after receiving
notification.
Any attempt by the vendor to substitute and make delivery of polymer(s) other than the brand or trade
name proposed and ordered, without prior written approval by the City, will be sufficient grounds for
immediate cancellation of the agreement.
COST PERFORMANCE
Throughout the life of the award, the City must obtain cost performance within ten percent of the
performance standard established during the trials. This means that if cake concentration and/or
polymer dosage rates change such that when they are entered into the dewatering polymer evaluation
form, the resultant total polymer cost shall not exceed the value calculated as part of the cost proposal
process by more than ten percent.
If the product does not produce cost performance (polymer cost per dry ton of biosolids) within ten
percent of the performance standard established during the trials, the City reserves the right to request
on-site jar testing and field trial from the current vendor.
The vendor will be offered the opportunity to assist City staff by making suggestions for improving
product performance or by changing products as noted in the Quality section. All remedial action
4

IFB: Biosolids Dewatering Polymer C i t y o f B i s m arck: Wastewater Treatment Plant
taken by the vendor will be subject to prior approval by City staff and will result in no additional cost to
the City.
If the vendor is unable to offer a satisfactory solution to the City, the City reserves the right to switch
to alternative polymer(s) from another vendor if the problem is temporary; or terminate the agreement.
TRAINING/SUPPORT SERVICES
The successful vendor will be required to provide technical assistance for operator training and
operations evaluation concurrent with the initial delivery of polymers, at no extra charge to the City.
Training shall not exceed eight hours. This assistance will include follow-up testing to ensure the
polymer meets performance standards. The successful vendor will also provide technical training as
required by the City to promote efficient product use and equipment operation.
Any cost incurred by the vendor in performing said assistance and/or training shall be considered
incidental to the agreement.
The successful vendor will be required to respond to requests for information and/or requests for on-
site assistance by providing a technically experienced representative with in-depth product knowledge
within 48 hours of a service request from the City of Bismarck.
TERM
The agreement shall be for the initial term as noted. The City reserves the right to extend the
agreement for two additional one-year periods and the same terms and conditions shall apply to
subsequent periods. The City reserves the right to reject any or all cost proposals and to waive any
informality.
The purchase agreement may be terminated by the City for the following reasons:
* The rejection of two loads in succession that do not meet specification, which is not corrected
by the supplier within 15 calendar days of written notice.
* Failure of product to meet the Technical Specification, based on the supplier's analysis or the
analysis of an independent testing lab, which is not corrected by the supplier within 15 calendar
days of notice.
* Failure of the supplier to provide requested technical service or support within 15 days of notice
of deficiency in service.
Any federal, state, or local administrative, legislative, or regulatory action which prohibits or restricts
the use of the product.
PRICE
Price increases may be granted by the city at the City's option and are eligible only when based on
comparable price increases for the vendor's source of supply. All prices stated on the bid form shall
be considered firm for the entire agreement period unless the vendor states on, or attaches to the bid
5

IFB: Biosolids Dewatering Polymer C i t y o f B i s m arck: Wastewater Treatment Plant
form, a price increase provision. No price increase shall be granted in excess of the actual or
percentage cost increase from the vendor's source supply. Vendors shall have the burden of providing
documentation of increases from vendor's source to the satisfaction of the City of Bismarck's
purchasing supervisor.
The City must have a thirty (30) day notice of price increase prior to said increase becoming effective.
The City reserves the right to reject any price increase and obtain a different source(s) to meet its
requirements as to such item when it serves the best interest of the City.
Vendor agrees that the City's exercise of its option to obtain alternative sources does not constitute a
breach of agreement.
If there are any reductions in the price of the items proposed, the City shall be given the benefit of
such reduction, and the same discounts (if any) shall apply. All products offered and furnished under
these specifications shall be current production.
PAYMENT
The vendor will bill the City after each delivery and render invoices with the City's purchase order
number clearly indicated. All original invoices must be remitted to the City of Bismarck Public Works
Utility Operations, Wastewater Treatment Facility, PO Box 5503, Bismarck, ND 58506. Failure to
comply with this requirement will result in delayed payment.
TRIAL PROCEDURES AND SPECIFICATIONS
Vendors shall coordinate all plant activities through Travis Carufel, Wastewater Treatment Facility
Superintendent, or Nick Rutschke, Wastewater Treatment Facility Supervisor at 701-355-1760.
Testing will take place at 601 London Avenue, Bismarck, ND 58504. Scheduling will be established
on a first-come, first-served basis.
* Preliminary Jar Testing is Recommended for each polymer wishing to be trialed during full-
scale testing. Jar testing may be scheduled to take place from August 10, 2026, to October 2,
2026, between the hours of 8:00 am CST to 3:00 pm CST.
* Successful Full-Scale Testing is Required and must be completed prior to submitting the
cost proposal. Full-scale testing may be scheduled from September 14, 2026, through October
23, 2026, between the hours of 8:00 am CST to 3:00 pm CST.
PRELIMINARY JAR TESTING (RECOMMENDED)
Preliminary jar testing allows polymer manufacturers to use the laboratory facility at the Bismarck
WWTF to evaluate their products on the sludge and select polymers to be included in the full-scale
testing. It will be the responsibility of the vendor to determine and provide their best available polymer
for full-scale testing. The manufacturer is responsible for providing equipment to evaluate their
polymer(s). An analytical balance and a drying oven may be available; however, plant personnel have
priority for their use. An effort will be made so no more than one supplier uses the laboratory facilities
at any one time.
6

IFB: Biosolids Dewatering Polymer C i t y o f B i s m arck: Wastewater Treatment Plant
FULL-SCALE TESTING (REQUIRED)
Full-scale testing shall take place prior to bid opening. The product cost proposal will have to be proven
equal to that of Solenis K274FLX as demonstrated during the actual operation of the screw press.
A maximum of three (3) emulsion polymers per manufacturer may be tested full-scale at the WWTF.
The vendor will be able to feed the polymer through the existing Velodyne polyblend system. Bismarck
Wastewater Facility staff will observe and will assist as needed with the operation of the dewatering
process but will not supply any extra equipment.
Each vendor will be allowed three (3) days on-site to optimize their polymers and perform the required
performance runs. The vendor will provide the polymer for full-scale testing at no cost to the City.
After the trial, manufacturers are required to remove their unused polymers and all totes/drums within
30 calendar days at no cost to the City.
It will be the responsibility of the vendor to provide on-site technical assistance to evaluate the testing
of their polymer at no charge to the City during the field trial. The City may reschedule a trial if dictated
by treatment plant problems beyond its control.
EVALUATION CRITERIA
The City's existing polymer feed system will be utilized during the full-scale trials to supply polymer
solution to the screw press. The City of Bismarck reserves the right to be the sole judge of acceptability.
Hosing or washing down of the presses during the trial period is forbidden. The exception is clean-up
after a complete wash-out or press failure, but only under the approval and guidance of the City of
Bismarck staff. Noncompliance risks rejection of the field trial and approval of the polymer.
FIELD TRIAL PERFORMANCE RUN SAMPLING
Samples of Press Influent TS, dewatered cake TS, and filtrate TS will be taken and analyzed to
determine minimum parameters are being achieved. A total of 12 samples, four each of dewatered
biosolids, Total influent solids, and filtrate at one-hour intervals will be analyzed and averaged for the
calculations.
TRIAL PARAMETERS
The following parameters will be used to evaluate results:
* Number of pounds of dry polymer utilized per dry ton of biosolids.
* Filtrate Total Solids content.
* Solids capture rate.
* Percent of cake dry solids.
* Influent TS sludge feed to press
7

IFB: Biosolids Dewatering Polymer C i t y o f B i s m arck: Wastewater Treatment Plant
TRIAL SAMPLES
SDS and Technical Data Information Sheets shall be provided for each polymer prior to the scheduled
field trials.
List the polymer product specifications in the spaces provided in the Polymer Trial Evaluation Form.
The polymer supplied for trials and every load delivered during an agreement term shall conform to
the vendor's submitted specifications. The City may perform independent testing to verify the technical
data provided by the vendor.
The polymer shall be free of any foreign elements or compounds that may prevent dried sludge for
use as a soil conditioner, or affect the biological process of the treatment facilities, or seriously
influence operations of the treatment facilities.
The screw presses will begin operation at 8:00 am CST. The twelve (12) "official" test samples per
day will be taken by City staff and averaged for evaluation. The City will provide the results to the
vendor for the Polymer Trial Evaluation Form detailing the results generated from these tests. The City
reserves the final authority; however, for standardization and fairness in all testing:
* Samples will be taken on:
a) Biosolids feed from anaerobic digester.
b) Filtrate discharge from screw press.
c) Cake produced from press.
* Calculations will be performed for:
Percent solids of biosolids from digester.
o
Percent total solids of filtrate.
o
Percent solids of cake.
o
Polymer use.
o
Solids capture rate.
o
Pound of polymer per dry ton of biosolids produced
o
The highest solids capture rate, highest cake solids and lowest filtrate solids will be considered as
part of the overall analysis.
OTHER INFORMATION
MODIFICATIONS TO THE REQUEST
The City of Bismarck reserves the right to reject any or all bids, make counter proposals and/or engage
in negotiations with any or all firms or individuals, waive any requirements or otherwise amend this
IFB, or cancel the IFB in order to achieve the City's goals and objectives. Any changes in the status
of the IFB will be brought to the attention of all parties that provide contact information for updates.
The information contained in this IFB represent the City's best information at the time of the release
of the IFB and the City reserves the right to modify any term or condition contained herein.
8

This is the opportunity summary page. It provides an overview of this opportunity and a preview of the attached documentation.
Daily notification on new contract opportunities

With GovernmentContracts, you can:

  • Find more opportunities and win more business
  • Receive daily alerts for all new bid opportunities
  • Get contract opportunities matched to your business
ONE WEEK FREE TRIAL

See also

RFx Name: FM365 UND Abbot Chiller Solicitation Number: SRC000493 Begin (UTC-5): 10/20/2026 12:00:00

State Government of North Dakota

Bid Due: 11/17/2026

UND Abbott Hall Chiller UND is looking to procure a chiller unit for

University of North Dakota

Bid Due: 11/17/2026

Bid Title: Water Utility Project No. 154 Category: Engineering Status: Open Description: Construction

City of Bismarck

Bid Due: 12/08/2026

Follow Flooring Requirement Contract Solicitation Active Contract Opportunity Notice ID FA465927Q0001 Related Notice

DEPT OF DEFENSE

Bid Due: 12/03/2026

* Disclaimer: Information regarding bids, requests for proposals (RFPs), or requests for qualifications (RFQs) is provided on this website only for convenience and does not constitute official public notice. Persons wishing to respond to or inquire about bids, RFPs, or RFQs should contact the appropriate government department.