LIFE PRESERVER,VEST - NSN 4220-01-113-8665

Active

Contract Opportunity

DLA Troop Support would appreciate your firm sharing your expertise and insight into how the subject item can be most efficiently procured. This market survey does not constitute an Invitation for Bid (IFB), a Request for Quote (RFQ), or a Request for Proposal (RFP) and should not be construed as a commitment of any kind by the Government to issue a formal solicitation or ultimately award a contract. Any information or pricing received will not be binding. The U.S Government is in no way liable to pay for or reimburse any companies or entities that respond to this market survey. Any costs incurred by interested companies in response to this market survey will not be reimbursed. The market survey is attached.

LIFE PRESERVER,VEST (MULTI-ACFT)

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RQ039: Non-Tailored Higher-Level Quality Requirements (SAE AS9100) for

Manufacturers and Non-Manufacturers

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

Hazard Communication Standard Notice:

Effective June 1, 2015, Federal Standard No. 313-E, Material Safety

Data, Transportation Data and Disposal Data for Hazardous Materials

Furnished to Government Activities, establishes the requirement for

preparation and submission of Safety Data Sheets (SDS) in lieu of

Material Safety Data Sheets (MSDS) by suppliers who provide hazardous

materials to government activities.

The Occupational Safety and Health Administration (OSHA) has modified

its Hazard Communication Standard (HCS) to conform to the United Nations

Globally Harmonized System of Classification and Labeling of Chemicals.

As a result of this change, GSA revised Federal Standard No. 313-E

requiring Safety Data Sheets for classifying chemicals and communicating

the applicable information on labels.

In accordance with the revised standard after June 1, 2015:

1. Suppliers will be required to submit, to the contracting officer for

review and approval prior to award, safety data sheets consistent with

the requirements found at 29 C.F.R. 1910.1200 for hazardous materials

delivered to the Government.

2. Suppliers will also be required to submit, to the contracting officer

for review and approval prior to award, Hazardous Communication Standard

(HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or

current Consumer Product Safety Act (CPSA), Federal Hazardous Substance

Act (FHSA) labels when subject to labeling requirements under those

statutes. This product labeling is required for hazardous materials

delivered to the Government.

3. Finally, suppliers must train their employees on the new safety data

sheets, hazardous communication labels, and requirements of 29 C.F.R.

1910.1200.

For more information on SDS, refer to OSHAs website, available at:

https://www.osha.gov/law-regs.html

For information on 29 C.F.R. 1910.1200, refer to the below link:

https://www.osha.gov/dsg/hazcom/index.html

RD003, COVERED DEFENSE INFORMATION MAY APPLY

RQ039: Non-Tailored Higher-Level Quality Requirements (SAE AS9100) for

Manufacturers and Non-Manufacturers

THIS IS AN AIR FORCE DESIGNATED CRITICAL SAFETY

ITEM (CSI).

.

ALL REQUESTS FOR WAIVERS OR DEVIATIONS MUST BE

FORWARDED TO THE DSC CONTRACTING OFFICER

FOR REVIEW AND APPROVAL.

.

ALL ITEMS OF SUPPLY SHALL BE MARKED IAW

MIL-STD-129. IN ADDITION, EACH UNIT PACK WILL

BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE),

CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S

CAGE CODE AND PART NUMBER.

TYPE MD-1.

CID A-A-50652

EXCEPTION TO YELLOW POUCH MATERIAL AS FOLLOWS.

YELLOW POUCH MATERIAL PER MIL-C-43006, TYPE 3,

MAXIMUM COATING WEIGHT OF 11 OUNCES IS

ACCEPTABLE, PER ESA BROOKS AFB.

CERTIFICATE OF QUALITY COMPLIANCE REQUIRED.

.

NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS

REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE

INCLUDING DATA FOR THE APPROVED AND ALTERNATE

PART FOR EVALUATION.

QUALITY ASSURANCE DATA

SPECIFICATION

DLAD CLAUSE 52.246-9004,PRODUCT VERIFICATION

TESTING,IS HEREBY INCORPORATED,AND MAY BE

INVOKED AT THE DISCRETION OF THE PROCUREMENT

ACTIVITY.

ASQ H1331 Table 1 Shall be used, and will take precedence over Sample

Size Coding methods and Sampling Plan tables as outlined in military and

federal specifications, standards, Commercial Item Descriptions (CIDs)

prepared by DoD activities, and those sampling plans cited by military

service and DLA Troop Support - Quality Assurance Provisions (QAPs).

Those documents that identify the classification of characteristics as

critical, major, and minor, shall have corresponding associated AQL

Index values of 0.10,1.0, and 4.0 respectively. ASQ H1331 takes

precedence over non-government standard ASQ Z1.4.

Those specifications, standards, CIDs, drawings and QAPs using sampling

plans based on zero acceptance are excluded from these requirements, as

are those not specifying characteristics as "critical", "major", and/or

"minor".

Quality conformance inspection requirements shall be in accordance with

clause 52.246-9064..

.

.

ALL ITEMS OF SUPPLY SHALL BE MARKED IAW

MIL-STD-129. IN ADDITION, EACH UNIT PACK WILL

BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE),

CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S

CAGE CODE AND PART NUMBER.

CRITICAL APPLICATION ITEM

IAW BASIC CID A-A-50652 NOT 3

REVISION NR DTD 05/03/2017

PART PIECE NUMBER:

IAW REFERENCE QAP 13873 EQ003

REVISION NR D DTD 02/09/2023

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98752 200415485

REVISION NR E DTD 01/30/2020

PART PIECE NUMBER:

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0

UNIT CONT:10 OPI:O

INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS

TEXT. All SPECIAL REQUIREMENTS IN PACKAGING ZZ, REFER TO STO ZD072,

HAZMAT STATEMENT IN PURCHASE ORDER

Attachments/Links