J065--INTENT TO SOLE SOURCE | Biomerieux for Full Service Microbiology Biomedical Engineering Services | 12/26/2024 to 12/25/2025

Active

Contract Opportunity

STATEMENT OF WORK

Biomerieux Microbiology

MARTINSBURG VA MEDICAL CENTER
Pathology and Laboratory Services
MARTINSBURG, WV 25405

TABLE OF CONTENTS
1.0 Introduction
1.1.1 Scope of Work
1.1.2 Non-Personal Services
1.2 Communication
1.3 Safety
1.4 Performance Reports
1.5 Technical Requirements
1.6 Professional Qualifications
1.7 Specific Task/Responsibilities
1.8 Period of Performance
1.9 Place/Hours of Performance
1.1 Holidays
1.11 Contractor Provided Services
2.0 Definitions/Acronyms
3.0 Applicable Technical Orders, Manuals, Regulations, Directives and Forms
3.1 Mandatory Documents
3.2 Other Requirements

INTRODUCTION: This is a Base plus four option years service contract Performance Period Dates Price Base Year: Option Year One: Option Year Two: Option Year Three: Option Year Four: Option years may be exercised. Contractor shall provide maintenance support for the VA Medical Center, Martinsburg WV. The services provided will be of nature and scope described in the paragraphs below.

1.1.1 SCOPE OF WORK: The purpose of this requirement is to Perform Preventive Maintenance and Repair on the following Biomerieux microbiology equipment: Myla VM, Vitek 60 serial number VTK25665, Vitek MS Prime s/n ES00746, Previ Color s/n 414292181788 and BACT/ALERT Virtuo serial number VATA-01782 located at the VA Medical Center, Martinsburg, WV 25405.

1.1.2 NON-PERSONAL SERVICES: This contract is a non-personal services contract under which the personnel rendering the services are not subject, either by the contract's terms or by the manner of its administration, to the supervision and control usually prevailing in relationships between the Government and its employees.

1.2 COMMUNICATION: The contractor's employee shall be able to read, write, understand and speak English clearly, to effectively communicate with patients and/or other healthcare providers and staff.

1.3 SAFETY: The Contractor shall be responsible for knowing and complying with all installation safety prevention regulations. Such regulations include, but are not limited to, general safety, fire prevention, and waste disposal.

1.4 PERFORMANCE REPORTS: Reports will be provided by the POC to ensure acceptable performance of the contract. Annual reports provided by POC to Contracting Officer after completion of each performance period will be reported to the DOD Contractor Performance Assessment Reporting System (CPARS).

1.5 TECHNICAL REQUIREMENTS: All Contractor employees provided by the Contractor shall meet the qualifications for that specialty and perform essentially the same functions, within the scope acceptable for their professional discipline and standard, as those required by the Department of Veterans Affairs or Government service health care professionals of similar experience and in similar duty assignments.

1.6 PROFESSIONAL QUALIFICATIONS: Personnel shall have current factory training and experience in the servicing Biomerieux MYLA, VITEK, MS PRIME, BACT/ALERT Virtuo and Color Previ that includes maintenance, repair and software/hardware upgrades. Biomerieux will provide upon request training certificates of any field service representative utilized to perform service requests.

1.7 SPECIFIC TASK AND RESPONSIBILITIES: The Contractor shall provide Preventive Maintenance Inspections (PMIs), for the , Vitek 60 serial number VTK25665, Vitek MS Prime s/n ES00746, Previ Color s/n 414292181788 and BACT/ALERT Virtuo serial number VATA-01782, Vitek 60 serial number VTK25665, Vitek MS Prime s/n ES00746, Previ Color s/n 414292181788 and BACT/ALERT Virtuo serial number VATA-01782 and their associated accessories.
1.7.1 CUSTOMER SUPPORT: The Biomerieux Customer Service Department provides an all-inclusive contract that includes the following services.
24x7x365 Help Desk support to address questions and problems on an immediate, real-time basis
On-site field service repair
On-site field service maintenance
Software updates
Hardware updates that fix an Assist defined functionality problem
Virus protection updates
Operating system patches
Ongoing interface maintenance
1.7.2 DIAGNOSTIC AND ISSUE RESOLUTION: The Biomerieux Customer Service Department provides diagnostic and resolution services that include the following:
Diagnosis/FboNotice cause analysis
Defined resolution approach: workaround or fix
Operator instruction on actions to be taken on the customer's end to correct the problem
Correction of errors/defects in the programs
Correction of configuration errors
Correction of errors in the standard software through the sourcing, testing, and implementation of patches and service packs provided by software providers
Correction of interfaces and custom reports
Quality/training initiatives to increase operator knowledge and decrease the number of incoming incidents.
1.7.7 PART REPLACEMENT: All parts, labor, and travel to perform maintenance service and repairs (preventive or corrective) are included in this Maintenance Agreement. Parts requiring replacement to maintain the equipment in accordance with Biomerieux Specifications will be replaced on a new part basis. Notification needs to be given to the POC of any equipment being replaced.

1.8 PERIOD OF PERFORMANCE: 05DEC2024 TO 04DEC2029 This is a Base plus four option years service contract Performance Period Dates Price Base Year: Option Year One: Option Year Two: Option Year Three: Option Year Four: Option years may be exercised.
1.9 PLACE/HOURS OF PERFORMANCE/NORMAL BUSINESS HOURS: The place of performance is the Pathology and Laboratory Department located at VA Medical Center, 510 Butler Ave, Martinsburg, WV 25405. Contract providers shall perform repair services Monday through Friday, between 8:00 AM and 4:30 PM EST, excluding holidays.
1.10 HOLIDAYS: The following legal holidays are observed by Martinsburg VA Medical Center:
New Year's Day
Martin Luther King's Birthday
President's Day
Memorial Day
JuneteenthÂ
Independence Day
Labor Day
Columbus Day
Veteran's Day
Thanksgiving Day
Christmas Day

NOTE: Any of the above holidays falling on a Saturday will be observed on the preceding Friday; holidays falling on a Sunday will be observed on the following Monday. Any holidays that are declared by Presidential Executive Order shall be observed in the same manner as the holidays listed above.
1.11.1 SERVICE REPORTS: A copy of the service report, complete with test data, will be furnished to the POC within 5 working days after completion of a PMI or Corrective Maintenance.
1.12 CONTRACTOR PROVIDED SERVICES:
1.12.1 The Contractor shall furnish all personnel and services to comply with the requirements of this contract. The Contractor will report to Biomed to be escorted to the equipment. The Contractor will converse with Biomed prior to exiting the building. He/she will provide an update of the equipment status and what work was performed.
1.12.2 POINT OF CONTACT: Upon award, the Contractor shall designate, in writing and provide to the POC and Contracting Officer, the name and telephone number of the point of contact for all actions on this requirement.
2.0 DEFINITIONS/ACRONYMS:
CONTRACTING OFFICER (CO): A person with the authority to enter into, administer, and/or terminate contracts and make related determinations and findings on contracts.
CONTRACTING OFFICER'S REPRESENTATIVE (POC): A Government employee, appointed in writing and within the limits of authority as delegated by the contracting officer, authorized to act as his representative in monitoring a contract.
QUALITY ASSESSMENT AND IMPROVEMENT (QA&I): An ongoing program designed to objectively and systematically monitor and evaluate the quality and appropriateness of patient care, to pursue opportunities to improve patient care, and to resolve identified problems.
QUALITY CONTROL: Those actions taken by the Contractor to control and ensure that performance of duties meet the requirements of the contract.
3.0 APPLICABLE TECHNICAL ORDERS, MANUALS, REGULATIONS, DIRECTIVES AND FORMS: All applicable directives and publications (advisory or mandatory), and supplements or amendments to these directives and publications will be current when furnished to the contractor. Directives will be available to contractor upon request.

3.1 The Contractor is required to follow all mandatory documents to the extent they apply to this contract. Any such changes to mandatory publications that cause a change in the scope of performance will not be implemented by the contractor until the Contracting Officer issues a modification in writing.

3.2 All Test Equipment utilized must meet NIST and ISO 9001 standards. Technicians must provide proof of calibration of instrumentation upon before or upon arrival. All invoices must contain the model, serial number and calibration date/due of test equipment utilized. The C&A Requirements do not apply and that a Security Accreditation Package is not required.


OEM LETTER

Attachments/Links