MPU Pressure Piping

SRC is currently constructing a unique project: North America’s first integrated, fully commercial, demonstration Rare Earth Processing Facility (REPF). The facility will consist of the Monazite Processing Unit (MPU), Solvent Extraction Unit (SXU), Terbium/Dysprosium Unit (TbDy), Metal Smelting Unit (MSU), and Tailings Processing Unit (TPU) housed within two buildings, Bay R and Bay P. The processing capability of this plant will enable rare earth-containing feedstocks of monazite, chlorides, or carbonates to be separated into individual rare earth elements in various finished forms. The facility is located near SRC’s existing properties in Saskatoon, Saskatchewan.

The Saskatchewan Research Council (SRC) is advancing the construction of North America’s first integrated Rare Earth Processing Facility (REPF) in Saskatoon, Saskatchewan. To support this effort, SRC is seeking qualified respondents to supply and install the pressure piping within the Monazite Processing Unit (MPU) of the REPF.

Included in Scope of Work

5.2.1. All labour, supervision, materials, tools, and equipment necessary to deliver the Scope of Work as described in this document
5.2.2. Review of all SRC-Supplied documentation for completeness, correctness, and constructability, with any discrepancies or deficiencies promptly reported to SRC for resolution
5.2.3. Supply and installation of carbon steel threaded pipe and fittings for Plant Air within the MPU of up to 2” diameter, both registered and non-registered with the Technical Safety Authority of Saskatchewan (TSASK). Refer to the Appendices in this RFQ package for the details of the Scope of Work, including Appendix D – Piping and Instrumentation Diagrams which has the Scope of Work highlighted.
5.2.4. Supply and installation of galvanized carbon steel threaded pipe and fittings for Instrument Air within the MPU of up to 2” diameter, both registered and non-registered with TSASK. Refer to the Appendices in this RFQ package for the details of the Scope of Work, including Appendix D – Piping and Instrumentation Diagrams which has the Scope of Work highlighted.

5.2.5. Installation of the following four air receivers:

5.2.6. 101-TNK-01 Bag Discharge Dust Collector Air Receiver including its pressure safety valve
5.2.7. 101-TNK-02 Grinding Mill Dust Collector Air Receiver including its pressure safety valve
5.2.8. 101-TNK-03 Silo Dust Collector 1 Air Receiver including its pressure safety valve
5.2.9. 101-TNK-04 Silo Dust Collector 2 Air Receiver including its pressure safety valve
5.2.10. Any modifications of the existing air receiver mounts located on the dust collectors as required to accommodate the height of fittings between the receivers and pulse valves. Scope of modifications is to include support demolition, fabrication, we