Land Mobile Radio (LMR) Tower Repair

Active

Contract Opportunity

Description

Moody AFB has a requirement seeking repair work on the LMR tower. The Land Mobile Radio System located at 23 Communication Squadron serves as the primary antenna supporting communication for handheld radios across the base.

PROJECT SCOPE:

All work will be conducted at the 23 Communication Squadron LMR tower. This structure is a three-leg guyed tower with five 20-ft. sections and one 10-ft. base section. The tower sections have pipe legs and welded solid round bracing members. The tower has two guy levels (48-ft. and 97-ft.) and a total of three guy anchors, one each direction. All sections have a "S" bracing pattern.

PROJECT REQUIREMENTS:

The Contract is responsible for the following.

a. The top cap plates need to be installed to prevent water intrusion inside the tower legs. The legs are open and getting rain water inside, this condition will accelerate corrosion inside the pipe legs.

b. The guy wires need to be tensioned to 10% of the wire breaking strength. This value is 660 pounds for a 1/4" guy wire. The tower needs to be plumb during this process. If new guy wires are place new thimbles will need to be installed.

c. The side arms at the 103-ft. level need to be relocated to the original location, similarly spaced around the tower as the other three side arms at 75-ft. level.

d. Remove any unused antenna and transmission lines no longer needed.

e. Cold galvanizing compound will need to be applied to corroded thimbles.

f. Provide climbing gear and safely equipment.

Interested Vendors:

Submissions of interest must include the following from interested vendors:

Capability Statement:

Company Information:

1. Business Name

2. Address

3. CAGE Code & UEI

4. Point of Contact (name, email, phone)

Indicate company's business size and any/all socio-economic categories.

Clearly demonstrate that the interested vendor is qualified and capable of providing the required equipment,

Identify type of services provided by your firm,

Identify size and type of equipment and services provided by relevant previous contracts (elaborate and provide detailed information and past performance).

Interested parties who can comply with and meet all the requirements called out in this market survey should respond with their documentation, as outlined above, in writing to the points of contact listed.

The purpose of this market survey is to solicit statements of interest and capabilities from all businesses capable of providing the specified equipment.

The NAICS CODE for this requirement will be 811210, Electronic and Precision Equipment Repair and Maintenance. Business Size Standard of $34M. The PSC code for this requirement will be J059, Maint/Repair/Rebuild of Equipment—Electrical and Electronic Equipment Components.

Please respond by submitting complete capability statement by email to:

ATTN: Samantha Elia & Ian Larsson

Email: samantha.elia@us.af.mil & ian.larsson@us.af.mil

All responses to this market survey must be received by July 8, 2025, 10:00 am EST.

Disclaimer:

The responses to this market survey will be used for informational purposes only. This is not a screening information request or request for proposal of any kind. We are not seeking or accepting proposals at this time. The responses will be used to develop the source list for this requirement. The government will not pay for any information received or costs incurred in preparing the response to the market survey. Therefore, any cost associated with the market survey submission is solely at the interested vendor’s expense.

Attachments/Links