High-Capacity Hydrogen and Hydrogen Isotope Getters

Location: New Mexico
Posted: Aug 14, 2026
Due: Nov 14, 2026
Agency: ENERGY, DEPARTMENT OF
Type of Government: Federal
Category:
  • 68 - Chemicals and Chemical Products
Solicitation No: S-193538
Publication URL: To access bid details, please log in.
Follow
High-Capacity Hydrogen and Hydrogen Isotope Getters
Active
Contract Opportunity
Notice ID
S-193538
Related Notice
Department/Ind. Agency
ENERGY, DEPARTMENT OF
Sub-tier
ENERGY, DEPARTMENT OF
Office
TRIAD - DOE CONTRACTOR
General Information
  • Contract Opportunity Type: Special Notice (Original)
  • Original Published Date: Aug 14, 2026 10:42 am MDT
  • Original Response Date: Nov 14, 2026 05:00 pm MST
  • Inactive Policy: Manual
  • Original Inactive Date: Aug 15, 2027
  • Initiative:
    • None
Classification
  • Original Set Aside: No Set aside used
  • Product Service Code: 6850 - MISCELLANEOUS CHEMICAL SPECIALTIES
  • NAICS Code:
    • 325998 - All Other Miscellaneous Chemical Product and Preparation Manufacturing
  • Place of Performance:
    Los Alamos , NM 87545
    USA
Description

Even small amounts of hydrogen can damage sensitive equipment over time. As hydrogen accumulates inside sealed environments, it can corrode metals, weaken structural materials, degrade electronic components, and, in some applications, create explosion hazards. Preventing that buildup is essential for maintaining the reliability and safety of many high-value systems.



Hydrogen getters are materials built into sealed devices and systems to remove hydrogen before it can accumulate. Like a moisture absorber, they remove an unwanted gas. Instead of trapping water, however, they chemically react with hydrogen and lock it away permanently. Depending on the application, a getter may take the form of a pellet, coating, thin film, powder, or printable material.



Many commercially available getters rely on zirconium-based materials that offer limited hydrogen storage capacity, require activation before use, or operate effectively only within a narrow temperature range. Some also depend on costly vacuum-deposition manufacturing processes that limit design flexibility.



Los Alamos researchers have developed a new class of hydrogen getters designed to overcome these limitations. The materials capture hydrogen and its isotopes, including deuterium and tritium, across a broad range of operating conditions without requiring activation while offering significantly higher storage capacity and greater flexibility for manufacturing and product integration.



Value Proposition



Hydrogen can quietly build up inside sealed devices and industrial systems, shortening equipment life and creating safety risks. Los Alamos National Laboratory has developed a new class of high-capacity hydrogen getters that permanently remove hydrogen before it causes damage. Compared with conventional getters, this technology stores more hydrogen, operates across a wider range of conditions, and can be manufactured in multiple forms for easy integration into commercial products.



Hydrogen uptake rate decreases as getter materials fill with hydrogen. Compared with a conventional getter (brown), the LANL high-capacity getter (green) maintains rapid hydrogen capture over a much larger storage capacity.



Advantages




  • Stores significantly more hydrogen than many conventional getter materials.

  • Permanently removes hydrogen, improving long-term reliability in sealed systems.

  • Operates across a broad temperature range without activation.

  • Captures hydrogen even at pressures well below atmospheric levels.

  • Selectively removes hydrogen in mixed-gas environments.

  • Hydrogen uptake rates can be tailored to specific applications.

  • Compatible with polymers and available as films, coatings, pellets, powders, strands, and printable pastes for flexible product integration.

  • Reduces projected material and manufacturing costs compared with many zirconium-based getter technologies.

  • Scalable manufacturing supports applications ranging from miniature electronics to large industrial systems.



Technology Description



The getter materials chemically react with hydrogen and its isotopes to form stable compounds that permanently lock the hydrogen inside the material, providing long-term protection for sealed devices and industrial equipment.



The technology is based on a novel organic alkyne chemistry. Alkynes are carbon-containing molecules that readily react with hydrogen, allowing the material to store substantially more hydrogen than many conventional getter systems.



Unlike many commercial getters, these materials operate without activation and continue to perform across a broad temperature range. They also selectively capture hydrogen in the presence of gases such as helium, nitrogen, argon, and methane, making them well suited for complex industrial and vacuum environments.



The hydrogen capture rate can be tailored by adjusting the catalyst formulation for specific operating conditions. Hydrogen capture has also been demonstrated at pressures well below atmospheric conditions, expanding the range of potential applications.



The materials are compatible with polymers and other common manufacturing materials, allowing them to be incorporated into films, coatings, pellets, powders, strands, adhesives, foams, and printable pastes.



Market Applications




  • Semiconductor and microelectronics packaging

  • Hermetically sealed electronics

  • Aerospace and defense

  • Medical devices

  • Nuclear material storage and processing

  • Vacuum and gas purification systems

  • Cryogenic equipment

  • Oil and gas infrastructure

  • Scientific instrumentation

  • High-reliability industrial systems





TRL 4



U.S. patent pending



LA-UR-26-25730





LANL Tech Partnerships: Unlock the Innovative Potential



Los Alamos National Laboratory offers a wide range of cutting-edge technologies and capabilities that may provide your company with a competitive edge in the market and unlock the innovative potential that can enhance, refine, and revolutionize your products.



LANL’s licensing program focuses on moving inventions developed by our researchers to commercial innovations. Patented and patent pending inventions and copyrighted software are available to existing and start-up companies through exclusive and non-exclusive licensing agreements. For specific discussions, please contact licensing@lanl.gov.



Note: This is not a call for external services for the development of this technology.



https://www.lanl.gov/engage/collaboration/feynman-center/partner-with-us/licensing-technology



m.lanl.gov/tech-search




Attachments/Links
Contact Information
Contracting Office Address
  • 505 King Ave
  • Columbus , OH 43201
  • USA
Primary Point of Contact
Secondary Point of Contact
History
  • Aug 14, 2026 10:42 am MDTSpecial Notice (Original)
Daily notification on new contract opportunities

With GovernmentContracts, you can:

  • Find more opportunities and win more business
  • Receive daily alerts for all new bid opportunities
  • Get contract opportunities matched to your business
ONE WEEK FREE TRIAL

See also

Follow TECHNOLOGY LICENSING OPPORTUNITY: GetterGauge Active Contract Opportunity Notice ID S-195417 Related Notice

ENERGY, DEPARTMENT OF

Bid Due: 3/05/2027

Follow 6810--501 - Dry Ice Base +4 Active Contract Opportunity Notice ID 36C26227Q0115

VETERANS AFFAIRS, DEPARTMENT OF

Bid Due: 11/26/2026

Follow TECHNOLOGY LICENSING OPPORTUNITY: GreenFuran Direct Allylation Active Contract Opportunity Notice ID S-191478

ENERGY, DEPARTMENT OF

Bid Due: 2/12/2027

* Disclaimer: Information regarding bids, requests for proposals (RFPs), or requests for qualifications (RFQs) is provided on this website only for convenience and does not constitute official public notice. Persons wishing to respond to or inquire about bids, RFPs, or RFQs should contact the appropriate government department.