Reynolds Museum - Concrete Floor in Storage Building

Location:	Alberta
Posted:	May 4, 2026
Due:	May 25, 2026
Agency:	Government of Alberta
Type of Government:	State & Local
Category:	54 - Prefabricated Structures and Scaffolding 56 - Construction and Building Materials Z - Maintenance, Repair or Alteration of Real Property
Solicitation No:	AB-2026-03516
Publication URL:	To access bid details, please log in.

Open

Open & Competitive Opportunity

Request for Proposal

Arts, Culture and Status of Women

Reynolds Museum - Concrete Floor in Storage Building

Engineering and construction of a 60 x 180 ft (18.28 x 54.86M) concrete floor slab for an existing storage building with a concrete driveway approach pad outside of the existing front building overhead door 18 x 20 ft (5.48 x 6.1m)

•        Subgrade preparation requires all organic material to be removed from slab area.
•        Minimum of 6” (15.25 cm) of compacted ¾” (20mm) minus crushed stone aggregate subbase.
•        Contractor will be responsible for all sub-base grading and aggregate placement.
•        Layer of minimum 6 mil poly barrier over prepared compacted gravel base.
•        All poly seams and penetrations overlapped a minimum of 8” (20cm) with the joints sealed with Tuck Tape or comparable product.
•        A minimum of 6” (15.25 cm) concrete slab thickness.
•        Minimum 32 mPa concrete mix.
•        C-2 exposure class concrete, 5-8% air entrapment.
•        Fiber reinforcement added to concrete to control shrinkage.
•        Concrete mix of ¾” (20mm) aggregate size.
•        #4 rebar spaced at 16”-18” (40-45cm) on center spacing.
•        A minimum of 2” (5cm) of concrete coverage over top of rebar.
•        Power trowel finish on the main floor area with a light broom finish at man door entrances.
•        Control cuts in floor slab must be 1.5” – 2” (3.8-5 cm) deep.
•        As there is no electrical power close to the work site, the contractor will need to supply their own portable generator if required.
•        There are no lights inside of the structure, the contractor will need to supply their own lights if required.
•        Contractor is responsible for obtaining all necessary permits (if required).
•        Contractor’s preferred concrete supplier must be a Certified Production Facility through Concrete Alberta.
•        Engineering report for the floor must be provided.

APC Reference # AB-2026-03516

Category Services

Posting Date • Time May 4, 2026 • 3:30 pm (MT)

Closing Date • Time May 25, 2026 • 2:00:00 pm (MT)

Region(s) of Delivery Alberta, Wetaskiwin

Express
Interest

Set
Bookmark

Share
Link

Reynolds Museum - Concrete Floor in Storage Building

See also