FY26 Navy Brig Computer Numerical Control (CNC) Machine

SOURCES SOUGHT: THIS IS NOT A NOTICE OF REQUEST FOR QUOTATION BUT INFORMATION AND PLANNING PURPOSES ONLY! This notice does not constitute a commitment by the Government. All information submitted in response to this announcement is voluntary and the Government will not pay for information requested nor will it compensate any respondent for any cost incurred in developing information provided to the Government.

The Notice ID number is N4561026RX00011 and shall be used to reference any written responses to this source sought.

The requirement is to provide:

628 Contracting Squadron and NAVCONBRIG at Joint Base Lindsey Graham anticipates a requirement to acquire one (1) CNC machine to support various programming interfaces and accommodate diverse materials expanding the shop's capabilities beyond traditional woodworking to include projects such as aluminum signs, brass hardware, or plastic industrial

components. Machine is required for PathPilot, and interfaced based on the industrial-standard LinuxCNC.

Salient Characteristics:

Machine Requirements:

l) Travels

2) X-Axis: 24.75 in. (625 mm)

3) Y-Axis: 55.75 in. (1415 mm)

4) Z-Axis: 6.70 in. (170 mm)

5) Spindle Power: 2 hp / 1.5 kW

6) Spindle Type: Electrospindle

7) Minimum Speed: 10,000 RPM

8) Maximum Speed: 24,000 RPM

9) Cooling; Water-Cooled (Chiller Included)

10) Spindle Taper: Stock - ER20 / With ATC - IS020

11) Thread Machining: Thread Mill

12) CNC Router: Single-Phase 115 Vac, 50/60 Hz, 15A breaker

13) Storm Vacuum Pump: Single-Phase 220-240 Vac / 20A breaker

14) Machine Specs

15) Table Type: Integrated Vacuum Table

16) Table Size: 26.5 in. x 65 in. (680 mm x 1650 mm)

17) Gantry Clearance: 6 in. ( 154 mm)

18) Machine Footprint: 72 in. x 39 in. (1.8 m x I m)

19) Overall System Height: 76.5 in. (1 .9 m)

20) Typical System Weight: 900 lb. ( 408 kg)

21) Linear Motion

22) Axis Motion: Ballscrew and Stepper Driver

23) Guideways: Precision Linear Guideway

24) Maximum Feed Rate: 200 1PM (5.0 m/min)

25) Construction

26) Stand: Welded Steel (Included)

27) Machine Base: Cast Iron

28) Gantry: Aluminum

29) Resolution & Accuracy

30) Resolution: 0.00025 in. (0.006 mm)

31) Ball Screw Positional Accuracy: ±0.002 in.i'ft. (±0.167 mm/m)

32) Repeatability: ±0.001 in. (±0.02 mm)

33) Certificate oflnspection: Download Example Here

34) Easy to learn, touch screen friendly user interface

35) Support for up to four axis continuous machining

36) Built-in recommended speeds and feeds calculator

37) 80GB program memory

38) On Site Installation

39) On Site training

40) 24R CNC Router

4 I) PathPilot Software

42) High Speed Machining

43) 64GB Memory

44) Coordinate Rotation

45) Conversational Programming

46) Software Updates

4 7) Leveling Caster Kit, I 000kg

48) Grease, Hiwin G-05, 400g

49) 1 HP Dust Collector with 30-micron bag filter

50) Dust Collection Hose, 4" ID x 5m Long - For Use With ATC

51) Printed Manual

52) PathPilot Controller

53) PathPilot Controller Vesa Mount

54) Touch Screen Kit

55) Waterproof Mouse

56) Waterproof Mini-Keyboard

57) Jog Shuttle Controller

58) Controller Arm

59) Electronic Tool Setter

60) Automatic Tool Changer

61) Machine Assembly

62) Canister Filter for Storm Vacuum System - 3in

63) Storm Vacuum Adapter Kit - 3in

64) Gasket, 5/16 in. Vacuum Neoprene Foam, 20 Feet

65) Spring-Loaded CNC Drag Knife

66) 24R Starter Cutting Tool Kit by Amana Tools

67) 1 .5 in. Spoilboard Surfacing Tool

68) ER20 Collet Set (30 Pcs.) - Inch

69) Huot ER20 Collet Rack

70) 1SO20 CNC Operator Set (Inch)

71) ISO20 Tool Holder, ER16A, 30mm Gauge Length

72) ISO20 Tool Holder, ER20A, 30mm Gauge Length

73) ISO20 Tool Holder Wrench

74) Tool Tightening Fixture, 1SO20

75) IP54 OriginCal Absolute Digital Calipers Oto 6 in.

76) USB M-Code 1/0 Interface Kit

77) Aspire Software

78) PathPilot Keyboard Shortcuts Mousepad