Repair Fabric Doors B610

The purpose of this synopsis is to gain knowledge of potential sources for this project including interested Small Business sources. This notice is for planning purposes only. No solicitation is currently available. Qualified Small Business sources should respond with a completed sources sought form that can be found in the attachments of this notice to briana.mccaffery@us.af.mil

THIS SOURCES SOUGHT IS NOT A REQUEST FOR PROPOSAL (RFP) OR AN INVITATION FOR BID- DO NOT SEND QUOTES/PROPOSALS.

Repair Fabric Doors B610

DESCRIPTION OF WORK:

Construction, Installation, and Maintenance Performance Requirements The result of this contract shall be a complete and usable refurbished Assa Abloy Mega door system that meets the specific requirements on Building 610 Maintenance Hanagr accordance with Assa Ably standards. Bid Option #1, Bid Option#2, and Bid Option#3 is based off the availability of funds. The contractor shall perform demolition/removal and installation new Assa Abloy Mega Door certified parts appropriate to the model fabric door currently installed and provide factory maintenance on the remain Mega Door parts and systems consistent with the manufacturer’s O&M Manual and recommendations. Performance shall achieve an acceptable quality level of ninety-eight (98) percent. Work to include but is not limited to:

- Replace Brake Assembles and Lifting Belts with certified manufacturer parts.

- Replace all Guide Blocks with certified manufacturer parts. Adjust all Guide Blocks to ensure smooth and reliable operation over the full open and close cycle of operation.

- Repair or replace damaged sections of guide rails to ensure smooth and reliable operation over the full open and close cycle of operation.

- Replace gear box oil and appropriate seals. Used oil shall be disposed of in accordance with DoD and local standards.

- Inspect, test and replace safety and limit devices as needed. Red Line or make comments directly on Attch3a_As- Builts_A4.1_Elevations.pdf and Attch3b_ B610 MegaDoor_Installation Shop Drawings.pdf attached to this Solicitation.

- Conduct a full Factory Maintenance Service of all door and door control system.

- BID OPTION #1: Repair by Replacement the fabric for all three Fabric Leaf with factory certified material and parts.

- BID OPTION #2: The contractor shall replace all belt hoist motors, belt hoist gear boxes and mullion hoist motors.

- BID OPTION #3: The contractor shall replace the non-functioning gear box in Building 138 Door#3 North. Door#3 North is currently stuck in the open position.

All on site work will be performed inside the FAA Controlled Movement Area at the following location:

174th Attack Wing

Hancock Field Air National Guard Base

6001 East Molloy Road

Syracuse, New York 13211

**All work shall be performed by Assa Abloy Certified Mega Door technicians**