October 21, 2026
REQUEST FOR PROPOSALS
TO PROVIDE
MAINTENANCE OFFICE BUILDING
FURNISHINGS
TO
THE CITY OF REDDING, CALIFORNIA
(Schedule Number 5730)
In accordance with the provisions of the Municipal Code of the City of Redding, sealed
proposals must be submitted to the City Clerk's 3rd floor office of the City of Redding, located at
City Hall, 777 Cypress Avenue, Redding, California 96001 prior to 3:00 p.m. PT, Thursday,
November 12, 2026, to provide The City of Redding and Redding Electric Utility with maintenance
office building furnishings, per specifications and general conditions.
PROPOSALS RECEIVED AFTER THIS TIME AND DATE MAY NOT BE ACCEPTED
OR CONSIDERED.
The said proposals will be opened at 3:00 p.m. PT, on Thursday, November 12, 2026, in
the designated City Hall Conference Room as posted in the main lobby of City Hall, 777 Cypress
Avenue, Redding, California.
The proposer shall submit one (1) original unbound paper proposal, three (3) complete
bound copies, and one (1) USB flash drive containing an exact PDF copy of the complete
proposal. All materials shall be enclosed in a sealed box or envelope clearly labeled with the
proposer's name and RFP Schedule No. 5730.
One (1) complete set of the proposer's pricing for all products and services required
under this RFP, using Attachment A, Proposal Pricing Form, shall be submitted in a separate
sealed envelope accompanying the proposal. The envelope shall be clearly labeled with the
proposer's name, RFP schedule number, and the designation "Attachment A, Proposal Pricing
Form."
The City will award any resulting contract in a manner consistent with the City
Purchasing Ordinance. Fax or electronic/email submission of proposals will not be allowed.
The cut-off date and time for receiving questions regarding this proposal is 5:00
p.m. PT, Monday, November 2, 2026. All inquiries must be made in writing and may be
submitted to the email address shown below.
THE CITY OF REDDING
R.E.U- Power Production Division
Tyler Nash- Utility Analyst
tnash@cityofredding.gov
RFP 5730 Page 1 of 64
|
|
|
|
NOTE
If a potential bidder/proposer received this solicitation document through
some means other than surface mail from the City of Redding (such as from the City
of Redding Internet web site, or from another prospective bidder/proposer), it is the
responsibility of the potential bidder/proposer to advise the assigned City of Redding
Purchasing contact of its intention to submit a bid/proposal so that any addenda or
other correspondence related to this solicitation will be sent to the potential
bidder/proposer. When contacting the Purchasing Division, the bidder/proposer shall
provide the solicitation number located on the cover page of this document.
Transmittal of this information must be in writing, by U.S. Mail, or e-mail.
Transmittal of this information via telephone is not acceptable.
Please submit bid/proposal as directed in the RFP package. Forward to:
City of Redding
City Clerk
777 Cypress Avenue
Redding, CA 96001
Proposals must be received by the City Clerk's office prior to 3:00 p.m. PT on the date
indicated below. Mailing envelope is to be clearly marked on the outside with the
following notation:
"Proposals for Schedule No. 5730; opening at
3:00 P.M., on Thursday, November 12, 2026"
Submissions may not be considered unless:
* Original proposal submittal and stated number of copies are received
* Cover letter is signed by one who has authority to sign contracts on behalf of
the organization.
* Attachment A- Pricing Form provided in a separate sealed envelope.
* USB/Flash drive(s) are received.
* Proposer shall comply with all submittal requirements and proposal
organization instructions specified in this RFP.
* Submission must be received by the date and time indicated on this form.
Note: Signatures must be legible, indicating full first and last name.
The City of Redding
R.E.U Power Production Division
Tyler Nash- Utility Analyst |
|
|
|
|
NOTE
If a potential bidder/proposer received this solicitation document through
some means other than surface mail from the City of Redding (such as from the City
of Redding Internet web site, or from another prospective bidder/proposer), it is the
responsibility of the potential bidder/proposer to advise the assigned City of Redding
Purchasing contact of its intention to submit a bid/proposal so that any addenda or
other correspondence related to this solicitation will be sent to the potential
bidder/proposer. When contacting the Purchasing Division, the bidder/proposer shall
provide the solicitation number located on the cover page of this document.
Transmittal of this information must be in writing, by U.S. Mail, or e-mail.
Transmittal of this information via telephone is not acceptable.
Please submit bid/proposal as directed in the RFP package. Forward to:
City of Redding
City Clerk
777 Cypress Avenue
Redding, CA 96001
Proposals must be received by the City Clerk's office prior to 3:00 p.m. PT on the date
indicated below. Mailing envelope is to be clearly marked on the outside with the
following notation:
"Proposals for Schedule No. 5730; opening at
3:00 P.M., on Thursday, November 12, 2026"
Submissions may not be considered unless:
* Original proposal submittal and stated number of copies are received
* Cover letter is signed by one who has authority to sign contracts on behalf of
the organization.
* Attachment A- Pricing Form provided in a separate sealed envelope.
* USB/Flash drive(s) are received.
* Proposer shall comply with all submittal requirements and proposal
organization instructions specified in this RFP.
* Submission must be received by the date and time indicated on this form.
Note: Signatures must be legible, indicating full first and last name.
The City of Redding
R.E.U Power Production Division
Tyler Nash- Utility Analyst
RFP 5730 Page 2 of 64
SPECIFICATIONS
REQUEST FOR PROPOSALS
TO PROVIDE
MAINTENANCE OFFICE BUILDING
FURNISHINGS
(Schedule No. 5730)
1) Introduction
The City of Redding (City) and Redding Electric Utility (REU) own and operate a power
generation facility located at 17120 Clear Creek Rd, Redding, CA 96001. A new maintenance
personnel building is currently being constructed to establish a permanent workspace for
engineers, maintenance technicians, electrical technicians and supporting administrative staff.
The City seeks proposals from qualified office furniture vendors to furnish its new maintenance
building with cohesive, durable, commercial-grade office furniture. The City intends to use
example products from the attached basis of design examples as a visual and functional
reference only. Proposers may offer equivalent or better products that fit the attached floor
plan, maintain a consistent design language, and meet or exceed the functional, dimensional,
finish, durability, and warranty requirements in this RFP.
The successful vendor shall provide a complete furnishing solution for the listed items,
coordinate with the City during submittal review and final selections and deliver assembled
furniture ready for use. Final minor positioning within rooms may be completed by City staff
after delivery, if needed.
2) Background and Building Use
The procurement is for a newly constructed maintenance building that will require new office
furniture. Based on the attached floor plan, the building includes private offices, shared offices,
a conference room, a break room, reception and support spaces. The current base scope focuses
on office desks, executive office furniture, shared office desks, office seating, conference
seating, guest seating, conference tables, a break room table, and small tables for executive
offices.
The floor plan shows private office modules generally arranged on approximately 12 foot and
13-foot perimeter bays, a right-side office wing with an overall width of approximately 18 feet,
and a southeast break room bay approximately 18 feet wide. Shared Offices 108 and 109 each
contain two work points. Conference Room 119 is the primary meeting space. Break Room
107 contains a central table. Attachment C, Floor Plan and Room Layout, shall govern for
planning purposes, but all dimensions remain subject to verification by the successful vendor
prior to final order.
Any proposer relying on dimensions other than the attached plans and field verification shall
do so at its own risk. The City expects vendors to use the floor plan and their own scaled layout
work to confirm fit, circulation, door swing clearance, aisle clearances, and user comfort.
Some existing furniture from the previous temporary building may be transferred and reused
by select staff. As a result, the quantities identified in this RFP may not align exactly with the
floor plan images included as an attachment. City staff will be responsible for moving and
assembling any existing furniture they elect to reuse.
RFP 5730 Page 3 of 64
3) Scope of Supply and Services
* Provide all furniture listed in the City's quantity schedule, or approved equivalent items,
including all standard hardware and accessories necessary for normal use.
* Review the attached floor plan and provide a coordinated furniture plan, room by room,
showing the proposed fit of each item.
* Provide product data, dimensions, cut sheets, finish options, images, warranty information,
lead times, and instructions for each proposed item.
* Provide inside delivery to the building, room by room staging, unpacking, assembly,
leveling, adjustment, and removal of all packaging and related debris.
* Protect all new building surfaces during delivery and assembly, including walls, doors,
frames, floors, glazing, and finished millwork.
* Coordinate with the City's point of contact regarding delivery sequence, access limitations,
building readiness, and punch list completion.
* Provide warranty support and a clear post installation service contact for claims,
replacement parts, and field service.
4) Freestanding Furniture Only; Excluded Work
This RFP is intentionally structured as a freestanding furniture procurement. The City is a
publicly funded California municipality and utility. To avoid creating a scope that could be
interpreted as public works installation of modular office systems or other affixed work, the
base scope is limited to freestanding furniture supply, delivery, and assembly only.
Accordingly, the following are expressly excluded from this solicitation and shall not be
included in the base proposal: wall mounted panel systems; modular office systems; wall
mounted storage; systems requiring vendor's permanent attachment to the building; floor, wall,
or ceiling; screws, bolts, toggle bolts, or similar fasteners into building surfaces; floor plates;
ceiling braces; hardwired power, data, or communications components; conduit; cable rough
in; and any work requiring a licensed electrician or trade contractor.
Proposers may recommend optional freestanding accessories only if those accessories do not
attach to the building, are not part of a modular office system, do not require hardwiring or
electrical modification and are clearly identified and separately priced as optional alternates.
The City reserves the right to reject any proposed accessory that, in the City's judgment, creates
public works, prevailing wage, or trade installation risk.
5) Vendor's Responsibilities
The selected vendor shall be responsible for providing all goods, services, labor, coordination,
materials, equipment, and support necessary to furnish, deliver, assemble, and prepare the furniture
for City use. Vendor responsibilities include the following:
Product Selection and Materials
* Provide new, unused, commercial-grade furniture suitable for daily use in a municipal office
environment.
* Ensure all proposed furniture meets or exceeds the City's specifications, basis of design
examples, quality expectations, and functional needs.
* Confirm that all products are compatible in style, finish, dimensions, durability, and intended
use.
* Provide only freestanding furniture unless otherwise approved in writing by the City.
RFP 5730 Page 4 of 64
Fitment and Verification
* Review the City's floor plans, room dimensions, and furniture layout intent before proposing
products.
* Verify that all proposed furniture will fit within the intended spaces and maintain reasonable
clearances, circulation, door swings, and usability.
* Provide product cut sheets, dimensions, drawings, finish information, and other details
needed for City review.
* Notify the City of any conflict, concern, or condition that may affect fit, cost, schedule,
delivery, or performance.
Shipping, Delivery, and Assembly
* Coordinate all ordering, shipping, freight, handling, delivery, unloading, and inside delivery.
* Provide all labor, tools, equipment, supervision, and materials needed to assemble, adjust,
level, clean, and prepare the furniture for use.
* Coordinate delivery dates and times with the City before shipment or delivery.
* Remove packaging, debris, pallets, and surplus materials from the site.
Staffing and Coordination
* Assign a primary contact responsible for scheduling, coordination, delivery, assembly, issue
resolution, and warranty support.
* Ensure all vendor staff, subcontractors, delivery personnel, and assembly crews follow City
site requirements and safety practices.
* Remain responsible for the performance, conduct, and work quality of all third-party
providers.
Quality and Industry Standards
* Provide commercial grade furniture consistent with recognized office furniture industry
standards, including applicable ANSI and BIFMA standards where relevant.
* Do not propose residential grade, temporary use, or non-commercial furniture unless
expressly approved by the City.
* Provide manufacturer warranty information, product specifications, and any available quality,
testing, or certification information.
City's Best Interest
* Act in good faith and in the City's best interest to avoid unnecessary costs, unreasonable
expenses, unsuitable products, and avoidable delays.
* Do not incur additional charges, substitute products, or make material changes without prior
written City approval.
Site Protection and Damage
* Protect the new building, flooring, walls, doors, frames, fixtures, and surrounding areas
during delivery and assembly.
* Repair or replace, at no cost to the City, any damage caused by the vendor, its employees,
subcontractors, suppliers, or delivery agents.
* Promptly report damaged, missing, defective, incomplete, or nonconforming items to the
City.
Closeout and Warranty Support
* Participate in final inspection and promptly correct all missing, damaged, defective,
incomplete, or nonconforming items.
* Submit accurate invoices, delivery documentation, product information, warranty documents,
and closeout materials required by the City.
* Coordinate warranty claims and remain responsible for managing warranty issues through
resolution.
RFP 5730 Page 5 of 64
6) City's Responsibilities
The City will provide reasonable support and coordination necessary for the selected vendor to
furnish, deliver, and assemble the furniture in accordance with the final award documents. City
responsibilities include the following:
Project Information
* Provide available floor plans, room dimensions, furniture quantities, basis of design
examples, and other project information reasonably necessary for proposal preparation and
final coordination.
* Identify the intended furniture locations, preferred room layouts, and general design intent.
* Provide final color, finish, and product selections after review of vendor submittals, samples,
and recommendations.
City Contact and Coordination
* Designate a primary City contact for project coordination, scheduling, questions, submittal
review, delivery coordination, and issue resolution.
* Coordinate internal City review of vendor submittals, layouts, finish selections, and proposed
products.
* Provide timely responses to vendor questions when additional information or clarification is
reasonably required.
Site Access and Readiness
* Coordinate access to the building for approved delivery and assembly dates.
* Notify the vendor when the applicable rooms are reasonably ready to receive furniture.
* Provide reasonable access to delivery routes, rooms, and designated assembly areas during
approved delivery windows.
* Identify any known site restrictions, access limitations, safety requirements, or coordination
concerns that may affect delivery or assembly.
Review and Approval
* Review product data, cut sheets, room layouts, finish samples, proposed substitutions, and
other required submittals for general conformance with the City's needs and the RFP
requirements.
* Review does not relieve the vendor of responsibility for accuracy, fitment, product
compatibility, delivery coordination, assembly, warranty compliance, or overall performance.
* Approve or reject proposed substitutions, changes, or deviations before final order release or
implementation.
Delivery and Placement
* Coordinate with the vendor regarding delivery timing, building access, and general room
availability.
* City staff will provide final positioning and safety considerations/attachments of furniture
after delivery and assembly, if needed and at the City's discretion.
* The City is not responsible for unloading, moving, assembling, adjusting, or correcting
vendor supplied furniture unless expressly agreed to in writing.
Inspection and Acceptance
* Inspect delivered and assembled furniture for visible damage, missing items, incomplete
assembly, and general conformance with the approved order.
* Provide final acceptance after the City determines the furniture has been delivered,
assembled, corrected, and documented in accordance with the contract requirements.
Payment
* Process properly submitted invoices in accordance with City procedures and the final contract
or purchase order.
RFP 5730 Page 6 of 64
|
|
|
|
|
|
|
|
| Item |
Qty |
|
Basis of Design Example |
|
Planning And Fit Notes |
|
|
|
|
|
(Based on N9NE Catalog as reference point) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Height Adjustable
Private Office Desk |
6 |
Deluxe Electric Height Adjustable
Corner / L-shaped Table Black Base with
72" wide and 78" depth
Espresso Laminate Top
(Example: PLTECAB6078E3S3MLWF,
PLT3072, PLT3048) |
|
|
|
Deluxe electric height adjustable corner |
|
|
|
|
|
|
|
workstation with black base and Espresso |
|
|
|
|
|
|
|
laminate tops. Intended for private office use |
|
|
|
|
|
|
|
where sit stand functionality is desired. |
|
|
|
|
|
|
|
Approximate overall footprint is 72"W x 78"D |
|
|
|
|
|
|
|
based on a 72"W x 30"D main top and 48"W x 30"D |
|
|
|
|
|
|
|
return top. Vendor shall confirm final orientation, |
|
|
|
|
|
|
|
full assembled dimensions, cable management, |
|
|
|
|
|
|
|
chair clearance, door swing clearance, and room |
|
|
|
|
|
|
|
fit before final order. Vendors may propose |
|
|
|
|
|
|
|
equivalent or similar products, subject to City |
|
|
|
|
|
|
|
review. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Height Adjustable
Executive Office
Desk |
1 |
|
Executive style U shaped workstation with |
|
|
Executive style U-shaped workstation intended for |
|
|
|
|
one height adjustable primary work surface. |
|
|
private office use where one primary work surface |
|
|
|
|
Basis of design is N9NE Classic Laminate |
|
|
is adjustable height. Vendor shall confirm final |
|
|
|
|
and Electrical Height Adjustable |
|
|
orientation, full assembled footprint, desk return |
|
|
|
|
components in Espresso finish, including a |
|
|
location, hutch placement, pedestal location, |
|
|
|
|
deluxe electric height adjustable desk base |
|
|
chair clearance, door swing clearance, cable |
|
|
|
|
with laminate base and modesty cover, 30" |
|
|
management, height adjustment range, and |
|
|
|
|
x 72" laminate work surface, credenza |
|
|
compatibility of all components before final order. |
|
|
|
|
shell, return shell, half leg support, full |
|
|
Configuration should include a 30" x 72" |
|
|
|
|
pedestal drawers, privacy/modesty screen, |
|
|
adjustable primary work surface with supporting |
|
|
|
|
desk mounted screen brackets, and |
|
|
credenza, return, pedestal drawers, privacy or |
|
|
|
|
matching hutch/storage components as |
|
|
modesty screen, brackets, and matching hutch or |
|
|
|
|
needed to complete the configuration. |
|
|
storage as needed. Vendor shall verify that the |
|
|
|
|
(Example: PLT3072, HADSD5001N, PL143, |
|
|
proposed layout fits the assigned office and |
|
|
|
|
PL145, PL142, PL166, PLTAP1554S, and |
|
|
remains fully functional in both seated and |
|
|
|
|
PLTSDTM.) |
|
|
standing positions. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Maintenance
Coordinator
Shared Office
Desk with Hutch
Design A |
2 |
Shared office freestanding desk consisting
of an asymmetrical 66" W x 72" D L-shaped
or corner desk with dual drawer pedestals,
desk mounted hutch with two laminate
doors, and dry erase hutch backboard.
Basis of design is N9NE Classic Laminate
components in Espresso finish, including
CLALD2040 and CLAHU2001. |
|
|
|
For shared office space with multiple occupants. |
|
|
|
|
|
|
|
Desks will be arranged evenly spaced across the |
|
|
|
|
|
|
|
width of the room as employee's desire. 66" W x |
|
|
|
|
|
|
|
72" D desks should be in a right-hand |
|
|
|
|
|
|
|
configuration. Due to limited room space, |
|
|
|
|
|
|
|
proposed furniture should maximize usable work |
|
|
|
|
|
|
|
surface and integrated storage while maintaining |
|
|
|
|
|
|
|
clear circulation. Proposers may recommend |
|
|
|
|
|
|
|
alternate desk solutions. |
|
|
|
|
|
|
|
|
|
| Deluxe Electric Height Adjustable |
| Corner / L-shaped Table Black Base with |
| 72" wide and 78" depth |
| Espresso Laminate Top |
| (Example: PLTECAB6078E3S3MLWF, |
| PLT3072, PLT3048) |
| Height Adjustable |
| Private Office Desk |
| Height Adjustable |
| Executive Office |
| Desk |
| Shared office freestanding desk consisting |
| of an asymmetrical 66" W x 72" D L-shaped |
| or corner desk with dual drawer pedestals, |
| desk mounted hutch with two laminate |
| doors, and dry erase hutch backboard. |
| Basis of design is N9NE Classic Laminate |
| components in Espresso finish, including |
| CLALD2040 and CLAHU2001. |
| Maintenance |
| Coordinator |
| Shared Office |
| Desk with Hutch |
|
| Design A |
* Payment shall not constitute acceptance of defective, damaged, incomplete, or
nonconforming goods or services.
* The City may withhold payment for unresolved punch list items, missing documentation,
damaged goods, incorrect products, or other contract noncompliance.
7) Furniture Quantities and Basis of Design
Quantities below are the City's current estimated base scope and may be adjusted before award. The
cited product examples are basis of design references only. Equivalent or better products are
permitted if they satisfy the functional intent, quality requirements, fit criteria, and finish expectations
of this RFP.
Basis of Design Example
Item Qty Planning And Fit Notes
(Based on N9NE Catalog as reference point)
Deluxe electric height adjustable corner
workstation with black base and Espresso
laminate tops. Intended for private office use
Deluxe Electric Height Adjustable where sit stand functionality is desired.
Corner / L-shaped Table Black Base with Approximate overall footprint is 72"W x 78"D
Height Adjustable 72" wide and 78" depth based on a 72"W x 30"D main top and 48"W x 30"D
6
Private Office Desk Espresso Laminate Top return top. Vendor shall confirm final orientation,
(Example: PLTECAB6078E3S3MLWF, full assembled dimensions, cable management,
PLT3072, PLT3048) chair clearance, door swing clearance, and room
fit before final order. Vendors may propose
equivalent or similar products, subject to City
review.
Executive style U shaped workstation with Executive style U-shaped workstation intended for
one height adjustable primary work surface. private office use where one primary work surface
Basis of design is N9NE Classic Laminate is adjustable height. Vendor shall confirm final
and Electrical Height Adjustable orientation, full assembled footprint, desk return
components in Espresso finish, including a location, hutch placement, pedestal location,
deluxe electric height adjustable desk base chair clearance, door swing clearance, cable
with laminate base and modesty cover, 30" management, height adjustment range, and
Height Adjustable
x 72" laminate work surface, credenza compatibility of all components before final order.
Executive Office 1
shell, return shell, half leg support, full Configuration should include a 30" x 72"
Desk
pedestal drawers, privacy/modesty screen, adjustable primary work surface with supporting
desk mounted screen brackets, and credenza, return, pedestal drawers, privacy or
matching hutch/storage components as modesty screen, brackets, and matching hutch or
needed to complete the configuration. storage as needed. Vendor shall verify that the
(Example: PLT3072, HADSD5001N, PL143, proposed layout fits the assigned office and
PL145, PL142, PL166, PLTAP1554S, and remains fully functional in both seated and
PLTSDTM.) standing positions.
For shared office space with multiple occupants.
Shared office freestanding desk consisting
Desks will be arranged evenly spaced across the
Maintenance of an asymmetrical 66" W x 72" D L-shaped
width of the room as employee's desire. 66" W x
Coordinator or corner desk with dual drawer pedestals,
72" D desks should be in a right-hand
Shared Office desk mounted hutch with two laminate
2 configuration. Due to limited room space,
Desk with Hutch doors, and dry erase hutch backboard.
proposed furniture should maximize usable work
Basis of design is N9NE Classic Laminate
surface and integrated storage while maintaining
Design A components in Espresso finish, including
clear circulation. Proposers may recommend
CLALD2040 and CLAHU2001.
alternate desk solutions.
RFP 5730 Page 7 of 64
|
|
|
|
|
|
|
|
| Maintenance
Coordinator
Shared Office
Desk with Hutch
Design B |
1 |
|
Shared office freestanding desk consisting |
|
|
For shared office space with multiple occupants. |
|
|
|
|
of an asymmetrical 60" W x 72" D L-shaped |
|
|
Desks will be arranged evenly spaced across the |
|
|
|
|
or corner desk with dual drawer pedestals, |
|
|
width of the room as employee's desire. 60" W x |
|
|
|
|
desk mounted hutch with two laminate |
|
|
72" D desk should be in a left-hand arrangement. |
|
|
|
|
doors, and dry erase hutch backboard. |
|
|
Due to limited room space, proposed furniture |
|
|
|
|
Basis of design is N9NE Classic Laminate |
|
|
should maximize usable work surface and |
|
|
|
|
components in Espresso finish, including |
|
|
integrated storage while maintaining clear |
|
|
|
|
CLALD2036 and CLAHU3001, with dry erase |
|
|
circulation. Proposers may recommend alternate |
|
|
|
|
hutch backboard if available, or black |
|
|
desk solutions if they improve fit, function, |
|
|
|
|
tackboard as an acceptable substitute. |
|
|
circulation, and overall design consistency. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Mechanics and I&E
Shared Office
Desk with Hutch
Dividers |
8 |
Shared office freestanding desk consisting
of a classic symmetrical 71" x 72"
L- shaped or corner desk with dual
drawer/pedestals, desk mounted hutch
with two laminate doors, and optional glass
dry erase board hutch backboard.
(Example: N9NE Classic Laminate
components in the Espresso finish, using
CLALD2044, CLAHU1001, GBM1769WHITE) |
|
|
|
For shared office spaces with multiple occupants. |
|
|
|
|
|
|
|
L-shaped or corner desks with hutches are |
|
|
|
|
|
|
|
intended to be placed back-to-back in a mirrored |
|
|
|
|
|
|
|
layout, using the hutch as a visual divider between |
|
|
|
|
|
|
|
users. Desks should be appropriate left- or right- |
|
|
|
|
|
|
|
hand configuration (4/4) to accommodate the |
|
|
|
|
|
|
|
mirrored arrangement as shown in provided |
|
|
|
|
|
|
|
attachments. Panel systems and cubicles are not |
|
|
|
|
|
|
|
desired unless freestanding. Due to limited room |
|
|
|
|
|
|
|
space, proposed furniture should maximize |
|
|
|
|
|
|
|
usable work surface and integrated storage while |
|
|
|
|
|
|
|
maintaining clear circulation. Proposers may |
|
|
|
|
|
|
|
recommend alternate freestanding desk solutions |
|
|
|
|
|
|
|
if they improve fit, function, circulation, and |
|
|
|
|
|
|
|
overall design consistency. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 3 Drawer
Mobile Pedestals |
6 |
Mobile 3 drawer pedestal with two box
drawers, one file drawer, and casters for
use under or with private office height
adjustable corner desks. Pedestal shall
coordinate with the associated desk and
office furniture in finish, style, hardware,
and overall appearance.
Example: N9NE PL248 in Espresso. |
|
|
|
Mobile pedestals should fit under or beside the |
|
|
|
|
|
|
|
private office height adjustable corner desks |
|
|
|
|
|
|
|
without interfering with chair movement, height |
|
|
|
|
|
|
|
adjustment, leg clearance, power access, or cable |
|
|
|
|
|
|
|
management. Pedestals shall be easily movable |
|
|
|
|
|
|
|
on casters, provide accessible personal storage, |
|
|
|
|
|
|
|
and coordinate with the desk finish, hardware, and |
|
|
|
|
|
|
|
overall office furniture appearance. Vendor shall |
|
|
|
|
|
|
|
confirm final pedestal size, placement, clearance, |
|
|
|
|
|
|
|
and compatibility with the proposed desk |
|
|
|
|
|
|
|
configuration. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Bookshelf |
8 |
Tall bookshelf approximately 70" to 76" high
and 32" to 36" wide, with at least 4 to 5
adjustable shelves. Unit shall be
commercial grade, durable, and
coordinated with the overall office furniture
appearance.
Example: N9NE PL156 in Espresso finish. |
|
|
|
Bookshelves should provide accessible storage |
|
|
|
|
|
|
|
for binders, manuals, reference materials, and |
|
|
|
|
|
|
|
general office use without interfering with |
|
|
|
|
|
|
|
circulation, doors, workstations, or seating. Units |
|
|
|
|
|
|
|
should be placed against suitable wall areas |
|
|
|
|
|
|
|
where they fit the room layout and coordinate with |
|
|
|
|
|
|
|
nearby furniture. Vendor shall confirm final |
|
|
|
|
|
|
|
dimensions, shelf capacity, placement, |
|
|
|
|
|
|
|
clearance, stability, and finish compatibility with |
|
|
|
|
|
|
|
the overall furniture package. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Office Chair
Design A |
7 |
Executive style office chair for use in private
and shared offices, with large, cushioned
seating, plush high back design, armrests,
casters, and height adjustment. Chair shall
provide comfortable daily task seating and |
|
|
|
Office Chair Design A should provide comfortable |
|
|
|
|
|
|
|
daily seating for private and shared office |
|
|
|
|
|
|
|
workstations while fitting appropriately within |
|
|
|
|
|
|
|
each desk layout. Chairs should allow normal |
|
|
|
|
|
|
|
movement, caster clearance, armrest clearance, |
|
|
|
|
|
|
|
and access to drawers, returns, hutches, and |
|
|
|
|
|
|
|
|
|
| Maintenance |
| Coordinator |
| Shared Office |
| Desk with Hutch |
|
| Design B |
| Shared office freestanding desk consisting |
| of a classic symmetrical 71" x 72" |
| L- shaped or corner desk with dual |
| drawer/pedestals, desk mounted hutch |
| with two laminate doors, and optional glass |
| dry erase board hutch backboard. |
| (Example: N9NE Classic Laminate |
| components in the Espresso finish, using |
| CLALD2044, CLAHU1001, GBM1769WHITE) |
| Mechanics and I&E |
| Shared Office |
| Desk with Hutch |
| Dividers |
| Mobile 3 drawer pedestal with two box |
| drawers, one file drawer, and casters for |
| use under or with private office height |
| adjustable corner desks. Pedestal shall |
| coordinate with the associated desk and |
| office furniture in finish, style, hardware, |
| and overall appearance. |
| Example: N9NE PL248 in Espresso. |
| 3 Drawer |
| Mobile Pedestals |
| Tall bookshelf approximately 70" to 76" high |
| and 32" to 36" wide, with at least 4 to 5 |
| adjustable shelves. Unit shall be |
| commercial grade, durable, and |
| coordinated with the overall office furniture |
| appearance. |
| Example: N9NE PL156 in Espresso finish. |
| Executive style office chair for use in private |
| and shared offices, with large, cushioned |
| seating, plush high back design, armrests, |
| casters, and height adjustment. Chair shall |
| provide comfortable daily task seating and |
Shared office freestanding desk consisting For shared office space with multiple occupants.
of an asymmetrical 60" W x 72" D L-shaped Desks will be arranged evenly spaced across the
Maintenance or corner desk with dual drawer pedestals, width of the room as employee's desire. 60" W x
Coordinator desk mounted hutch with two laminate 72" D desk should be in a left-hand arrangement.
Shared Office doors, and dry erase hutch backboard. Due to limited room space, proposed furniture
1
Desk with Hutch Basis of design is N9NE Classic Laminate should maximize usable work surface and
components in Espresso finish, including integrated storage while maintaining clear
Design B CLALD2036 and CLAHU3001, with dry erase circulation. Proposers may recommend alternate
hutch backboard if available, or black desk solutions if they improve fit, function,
tackboard as an acceptable substitute. circulation, and overall design consistency.
For shared office spaces with multiple occupants.
L-shaped or corner desks with hutches are
intended to be placed back-to-back in a mirrored
Shared office freestanding desk consisting layout, using the hutch as a visual divider between
of a classic symmetrical 71" x 72" users. Desks should be appropriate left- or right-
L- shaped or corner desk with dual hand configuration (4/4) to accommodate the
Mechanics and I&E
drawer/pedestals, desk mounted hutch mirrored arrangement as shown in provided
Shared Office
8 with two laminate doors, and optional glass attachments. Panel systems and cubicles are not
Desk with Hutch
dry erase board hutch backboard. desired unless freestanding. Due to limited room
Dividers
(Example: N9NE Classic Laminate space, proposed furniture should maximize
components in the Espresso finish, using usable work surface and integrated storage while
CLALD2044, CLAHU1001, GBM1769WHITE) maintaining clear circulation. Proposers may
recommend alternate freestanding desk solutions
if they improve fit, function, circulation, and
overall design consistency.
Mobile pedestals should fit under or beside the
private office height adjustable corner desks
Mobile 3 drawer pedestal with two box
without interfering with chair movement, height
drawers, one file drawer, and casters for
adjustment, leg clearance, power access, or cable
use under or with private office height
management. Pedestals shall be easily movable
3 Drawer adjustable corner desks. Pedestal shall
6 on casters, provide accessible personal storage,
Mobile Pedestals coordinate with the associated desk and
and coordinate with the desk finish, hardware, and
office furniture in finish, style, hardware,
overall office furniture appearance. Vendor shall
and overall appearance.
confirm final pedestal size, placement, clearance,
Example: N9NE PL248 in Espresso.
and compatibility with the proposed desk
configuration.
Bookshelves should provide accessible storage
for binders, manuals, reference materials, and
Tall bookshelf approximately 70" to 76" high
general office use without interfering with
and 32" to 36" wide, with at least 4 to 5
circulation, doors, workstations, or seating. Units
adjustable shelves. Unit shall be
should be placed against suitable wall areas
Bookshelf 8 commercial grade, durable, and
where they fit the room layout and coordinate with
coordinated with the overall office furniture
nearby furniture. Vendor shall confirm final
appearance.
dimensions, shelf capacity, placement,
Example: N9NE PL156 in Espresso finish.
clearance, stability, and finish compatibility with
the overall furniture package.
Office Chair Design A should provide comfortable
Executive style office chair for use in private
daily seating for private and shared office
Office Chair and shared offices, with large, cushioned
workstations while fitting appropriately within
7 seating, plush high back design, armrests,
each desk layout. Chairs should allow normal
Design A casters, and height adjustment. Chair shall
movement, caster clearance, armrest clearance,
provide comfortable daily task seating and
and access to drawers, returns, hutches, and
RFP 5730 Page 8 of 64
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
coordinate with the overall office furniture
package.
Example: N9NE St. James Series, high back
Leathertek in black, Model No. 20371S. |
|
|
|
surrounding furniture without limiting circulation. |
|
|
|
|
|
|
|
|
|
|
|
Vendor shall confirm chair dimensions, |
|
|
|
|
|
|
|
|
|
|
|
adjustment range, caster suitability for floor type, |
|
|
|
|
|
|
|
|
|
|
|
durability, weight capacity, warranty, and |
|
|
|
|
|
|
|
|
|
|
|
compatibility. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Office Chair
Design B |
|
|
7 |
|
|
|
Ergonomic high back-office chair with |
|
|
Office Chair Design B should provide ergonomic |
|
|
|
|
|
|
|
|
headrest for use in private and shared |
|
|
daily task seating with a high back, headrest, and |
|
|
|
|
|
|
|
|
offices, with comfortable daily task seating, |
|
|
adjustable support for private and shared office |
|
|
|
|
|
|
|
|
adjustable features, armrests, casters, and |
|
|
workstations. Chairs should fit appropriately at |
|
|
|
|
|
|
|
|
durable commercial grade construction. |
|
|
proposed desks without limiting caster |
|
|
|
|
|
|
|
|
Chair shall provide professional office |
|
|
movement, armrest clearance, drawer access, |
|
|
|
|
|
|
|
|
seating while coordinating with the overall |
|
|
return use, or circulation. Vendor shall confirm |
|
|
|
|
|
|
|
|
furniture package. Basis of design is N9NE |
|
|
chair dimensions, adjustment range, headrest and |
|
|
|
|
|
|
|
|
Pilot Series, high back chair with headrest, |
|
|
armrest clearance, caster suitability for floor type, |
|
|
|
|
|
|
|
|
Model No. 7307, or City approved |
|
|
durability, warranty, and compatibility with the |
|
|
|
|
|
|
|
|
equivalent. |
|
|
proposed office furniture layout. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Conference Room
& Eng Library
Chair |
|
|
40 |
|
|
|
Compact swivel chair with height |
|
|
Conference room and engineering library chairs |
|
|
|
|
|
|
|
|
adjustment, comfortable commercial grade |
|
|
should be compact, comfortable, and easy to |
|
|
|
|
|
|
|
|
seating, and a professional appearance |
|
|
reposition for meetings, training sessions, and |
|
|
|
|
|
|
|
|
suitable for conference rooms and the |
|
|
flexible seating layouts. Chairs should fit |
|
|
|
|
|
|
|
|
engineering library. Chair should be |
|
|
efficiently around the proposed tables without |
|
|
|
|
|
|
|
|
durable, affordable, and appropriately sized |
|
|
overcrowding the rooms or limiting circulation. |
|
|
|
|
|
|
|
|
for tighter seating arrangements. Black |
|
|
Proposed seating should be durable for daily use, |
|
|
|
|
|
|
|
|
leather or vinyl is preferred, or a color that |
|
|
visually coordinate with the overall furniture |
|
|
|
|
|
|
|
|
coordinates with the overall office furniture |
|
|
package, and remain practical for tighter room |
|
|
|
|
|
|
|
|
package. |
|
|
configurations. Vendor shall confirm chair |
|
|
|
|
|
|
|
|
Example: N9NE Stratus Swivel with chrome |
|
|
dimensions, seating capacity, table clearance, |
|
|
|
|
|
|
|
|
frame, Model No. 6960. |
|
|
caster or glide suitability, and overall room fit. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Guest & Reception
Chair |
|
|
28 |
|
|
|
Comfortable, professional, and affordable |
|
|
Guest and reception chairs should provide |
|
|
|
|
|
|
|
|
guest chairs for private offices, reception |
|
|
comfortable visitor seating in private offices, |
|
|
|
|
|
|
|
|
areas, and general visitor seating needs. |
|
|
reception areas, and other guest seating locations |
|
|
|
|
|
|
|
|
Chairs shall coordinate with the overall |
|
|
without overcrowding the rooms or limiting |
|
|
|
|
|
|
|
|
furniture package in appearance, finish, and |
|
|
circulation. Chairs should fit appropriately |
|
|
|
|
|
|
|
|
style, with black leather or vinyl preferred |
|
|
opposite desks, near waiting areas, and in other |
|
|
|
|
|
|
|
|
and frame or leg finishes that complement |
|
|
designated spaces while coordinating with the |
|
|
|
|
|
|
|
|
Espresso furniture tones or other selected |
|
|
overall furniture package. Vendor shall confirm |
|
|
|
|
|
|
|
|
finishes. |
|
|
chair dimensions, placement, clearance, |
|
|
|
|
|
|
|
|
Example: N9NE Wellington Series Model |
|
|
durability, finish compatibility, and suitability for |
|
|
|
|
|
|
|
|
No. 1800. |
|
|
daily visitor use. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Breakroom Chair |
|
|
8 |
|
|
Durable, stackable, and easy to clean
breakroom chairs with casters for use with
the breakroom table. Chairs should be
simple, affordable, suitable for daily dining
and breakroom use, and finished in black or
another color that coordinates with the
overall furniture package.
Example: N9NE Model No. 3220TG/27/28. |
|
|
|
Breakroom chairs should fit comfortably around |
|
|
|
|
|
|
|
|
|
|
|
the proposed breakroom table while maintaining |
|
|
|
|
|
|
|
|
|
|
|
clear circulation and practical daily use for dining |
|
|
|
|
|
|
|
|
|
|
|
and break periods. Chairs should be lightweight, |
|
|
|
|
|
|
|
|
|
|
|
stackable, easy to move on casters, and simple to |
|
|
|
|
|
|
|
|
|
|
|
clean. Vendor shall confirm chair dimensions, |
|
|
|
|
|
|
|
|
|
|
|
seating capacity, caster suitability for floor type, |
|
|
|
|
|
|
|
|
|
|
|
storage or stacking requirements, durability, and |
|
|
|
|
|
|
|
|
|
|
|
finish compatibility with the breakroom table and |
|
|
|
|
|
|
|
|
|
|
|
overall furniture package. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| coordinate with the overall office furniture |
| package. |
| Example: N9NE St. James Series, high back |
| Leathertek in black, Model No. 20371S. |
| Conference Room |
| & Eng Library |
| Chair |
| Durable, stackable, and easy to clean |
| breakroom chairs with casters for use with |
| the breakroom table. Chairs should be |
| simple, affordable, suitable for daily dining |
| and breakroom use, and finished in black or |
| another color that coordinates with the |
| overall furniture package. |
| Example: N9NE Model No. 3220TG/27/28. |
coordinate with the overall office furniture surrounding furniture without limiting circulation.
package. Vendor shall confirm chair dimensions,
Example: N9NE St. James Series, high back adjustment range, caster suitability for floor type,
Leathertek in black, Model No. 20371S. durability, weight capacity, warranty, and
compatibility.
Ergonomic high back-office chair with Office Chair Design B should provide ergonomic
headrest for use in private and shared daily task seating with a high back, headrest, and
offices, with comfortable daily task seating, adjustable support for private and shared office
adjustable features, armrests, casters, and workstations. Chairs should fit appropriately at
Office Chair durable commercial grade construction. proposed desks without limiting caster
7 Chair shall provide professional office movement, armrest clearance, drawer access,
Design B seating while coordinating with the overall return use, or circulation. Vendor shall confirm
furniture package. Basis of design is N9NE chair dimensions, adjustment range, headrest and
Pilot Series, high back chair with headrest, armrest clearance, caster suitability for floor type,
Model No. 7307, or City approved durability, warranty, and compatibility with the
equivalent. proposed office furniture layout.
Compact swivel chair with height Conference room and engineering library chairs
adjustment, comfortable commercial grade should be compact, comfortable, and easy to
seating, and a professional appearance reposition for meetings, training sessions, and
suitable for conference rooms and the flexible seating layouts. Chairs should fit
engineering library. Chair should be efficiently around the proposed tables without
Conference Room
durable, affordable, and appropriately sized overcrowding the rooms or limiting circulation.
& Eng Library 40
for tighter seating arrangements. Black Proposed seating should be durable for daily use,
Chair
leather or vinyl is preferred, or a color that visually coordinate with the overall furniture
coordinates with the overall office furniture package, and remain practical for tighter room
package. configurations. Vendor shall confirm chair
Example: N9NE Stratus Swivel with chrome dimensions, seating capacity, table clearance,
frame, Model No. 6960. caster or glide suitability, and overall room fit.
Comfortable, professional, and affordable Guest and reception chairs should provide
guest chairs for private offices, reception comfortable visitor seating in private offices,
areas, and general visitor seating needs. reception areas, and other guest seating locations
Chairs shall coordinate with the overall without overcrowding the rooms or limiting
furniture package in appearance, finish, and circulation. Chairs should fit appropriately
Guest & Reception
28 style, with black leather or vinyl preferred opposite desks, near waiting areas, and in other
Chair
and frame or leg finishes that complement designated spaces while coordinating with the
Espresso furniture tones or other selected overall furniture package. Vendor shall confirm
finishes. chair dimensions, placement, clearance,
Example: N9NE Wellington Series Model durability, finish compatibility, and suitability for
No. 1800. daily visitor use.
Breakroom chairs should fit comfortably around
Durable, stackable, and easy to clean the proposed breakroom table while maintaining
breakroom chairs with casters for use with clear circulation and practical daily use for dining
the breakroom table. Chairs should be and break periods. Chairs should be lightweight,
simple, affordable, suitable for daily dining stackable, easy to move on casters, and simple to
Breakroom Chair 8
and breakroom use, and finished in black or clean. Vendor shall confirm chair dimensions,
another color that coordinates with the seating capacity, caster suitability for floor type,
overall furniture package. storage or stacking requirements, durability, and
Example: N9NE Model No. 3220TG/27/28. finish compatibility with the breakroom table and
overall furniture package.
RFP 5730 Page 9 of 64
|
|
|
|
|
|
|
|
| Conference Tables |
8 |
|
Flip top nesting tables for flexible training |
|
Conference room and engineering library tables
should be easily movable and reconfigurable while
remaining sturdy and secure when in use. Due to
limited room sizes, proposed tables should
support compact layouts, efficient circulation,
and space saving storage or rearrangement.
Tables should be suitable for both meetings and
training sessions, with consistent models
preferred across rooms for interchangeability. |
|
|
|
|
|
and meeting arrangements. Basis of design |
|
|
|
|
|
|
|
is N9NE flip top nesting tables with |
|
|
|
|
|
|
|
Espresso laminate top, black base, locking |
|
|
|
|
|
|
|
casters, modesty panel, and ganging |
|
|
|
|
|
|
|
hardware for connected layouts. |
|
|
|
|
|
|
|
(Example: PLT2460 24" x 60" laminate top, |
|
|
|
|
|
|
|
PTLF-60 flip top nesting base, PTLFMOD 60 |
|
|
|
|
|
|
|
modesty panel, and applicable ganging |
|
|
|
|
|
|
|
hardware.) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Engineering Library
Tables |
4 |
|
Flip top nesting tables for flexible training |
|
Conference room and engineering library tables
should be easily movable and reconfigurable while
remaining sturdy and secure when in use. Due to
limited room sizes, proposed tables should
support compact layouts, efficient circulation,
and space saving storage or rearrangement.
Tables should be suitable for both meetings and
training sessions, with consistent models
preferred across rooms for interchangeability. |
|
|
|
|
|
and meeting arrangements. Basis of design |
|
|
|
|
|
|
|
is N9NE flip top nesting tables with |
|
|
|
|
|
|
|
Espresso laminate top, black base, locking |
|
|
|
|
|
|
|
casters, modesty panel, and ganging |
|
|
|
|
|
|
|
hardware for connected layouts. |
|
|
|
|
|
|
|
(Example: PLT2460 24" x 60" laminate top, |
|
|
|
|
|
|
|
PTLF-60 flip top nesting base, PTLFMOD 60 |
|
|
|
|
|
|
|
modesty panel, and applicable ganging |
|
|
|
|
|
|
|
hardware.) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Break Room Table |
1 |
Multiuse breakroom table suitable for dining
and informal collaboration. Basis of design
is an oval, round, or boat shaped table
approximately 8 feet to 10 feet long,
standard table height, with seating capacity
for 6 to 8 users. Preferred finish is Espresso
laminate with a matching black frame.
Example: N9NE SIGBS4236N METAL in
Espresso finish with black frame. |
|
|
|
Planning and Fit Notes: Breakroom table should |
|
|
|
|
|
|
|
be sized and shaped to fit the room layout shown |
|
|
|
|
|
|
|
on the building plans while maintaining clear |
|
|
|
|
|
|
|
circulation and comfortable seating for 6 to 8 |
|
|
|
|
|
|
|
small chairs. Oval, round, or boat shaped tables |
|
|
|
|
|
|
|
may be proposed if they provide the best fit for |
|
|
|
|
|
|
|
dining, break time use, and informal staff |
|
|
|
|
|
|
|
collaboration. Proposed table shall coordinate |
|
|
|
|
|
|
|
with the overall appearance of the office furniture, |
|
|
|
|
|
|
|
preferably in a matching Espresso finish, and shall |
|
|
|
|
|
|
|
be appropriate for the available room dimensions |
|
|
|
|
|
|
|
and intended daily use. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Executive Office
Small Table |
2 |
Small round meeting table suitable for 2 to 3
seats, with a 36" to 40" laminate top and
metal or laminate cross base. Table shall
coordinate with the overall office furniture
appearance, preferably with an Espresso
laminate top and black base.
Basis of design is similar to N9NE PLT36R
with compatible metal cross base
PLTXBM24BLK. |
|
|
|
For small meeting or consultation use within |
|
|
|
|
|
|
|
executive offices 101 and 115. Tables should |
|
|
|
|
|
|
|
comfortably support 2 to 3 people for short |
|
|
|
|
|
|
|
meetings, discussions, or document review while |
|
|
|
|
|
|
|
maintaining clear circulation, chair clearance, and |
|
|
|
|
|
|
|
access to the primary desk area. Proposers may |
|
|
|
|
|
|
|
recommend round, square, or other freestanding |
|
|
|
|
|
|
|
table shapes and sizes that best fit the office |
|
|
|
|
|
|
|
dimensions shown on the building plans and |
|
|
|
|
|
|
|
coordinate with the overall furniture design. |
|
|
|
|
|
|
|
|
|
| Conference room and engineering library tables |
| should be easily movable and reconfigurable while |
| remaining sturdy and secure when in use. Due to |
| limited room sizes, proposed tables should |
| support compact layouts, efficient circulation, |
| and space saving storage or rearrangement. |
| Tables should be suitable for both meetings and |
| training sessions, with consistent models |
| preferred across rooms for interchangeability. |
| Conference room and engineering library tables |
| should be easily movable and reconfigurable while |
| remaining sturdy and secure when in use. Due to |
| limited room sizes, proposed tables should |
| support compact layouts, efficient circulation, |
| and space saving storage or rearrangement. |
| Tables should be suitable for both meetings and |
| training sessions, with consistent models |
| preferred across rooms for interchangeability. |
| Engineering Library |
| Tables |
| Multiuse breakroom table suitable for dining |
| and informal collaboration. Basis of design |
| is an oval, round, or boat shaped table |
| approximately 8 feet to 10 feet long, |
| standard table height, with seating capacity |
| for 6 to 8 users. Preferred finish is Espresso |
| laminate with a matching black frame. |
| Example: N9NE SIGBS4236N METAL in |
| Espresso finish with black frame. |
| Small round meeting table suitable for 2 to 3 |
| seats, with a 36" to 40" laminate top and |
| metal or laminate cross base. Table shall |
| coordinate with the overall office furniture |
| appearance, preferably with an Espresso |
| laminate top and black base. |
| Basis of design is similar to N9NE PLT36R |
| with compatible metal cross base |
| PLTXBM24BLK. |
| Executive Office |
| Small Table |
Flip top nesting tables for flexible training Conference room and engineering library tables
and meeting arrangements. Basis of design should be easily movable and reconfigurable while
is N9NE flip top nesting tables with remaining sturdy and secure when in use. Due to
Espresso laminate top, black base, locking limited room sizes, proposed tables should
Conference Tables 8 casters, modesty panel, and ganging support compact layouts, efficient circulation,
hardware for connected layouts. and space saving storage or rearrangement.
(Example: PLT2460 24" x 60" laminate top, Tables should be suitable for both meetings and
PTLF-60 flip top nesting base, PTLFMOD 60 training sessions, with consistent models
modesty panel, and applicable ganging preferred across rooms for interchangeability.
hardware.)
Flip top nesting tables for flexible training
Conference room and engineering library tables
and meeting arrangements. Basis of design
should be easily movable and reconfigurable while
is N9NE flip top nesting tables with
remaining sturdy and secure when in use. Due to
Espresso laminate top, black base, locking
limited room sizes, proposed tables should
Engineering Library casters, modesty panel, and ganging
4 support compact layouts, efficient circulation,
Tables hardware for connected layouts.
and space saving storage or rearrangement.
(Example: PLT2460 24" x 60" laminate top,
Tables should be suitable for both meetings and
PTLF-60 flip top nesting base, PTLFMOD 60
training sessions, with consistent models
modesty panel, and applicable ganging
preferred across rooms for interchangeability.
hardware.)
Planning and Fit Notes: Breakroom table should
be sized and shaped to fit the room layout shown
Multiuse breakroom table suitable for dining
on the building plans while maintaining clear
and informal collaboration. Basis of design
circulation and comfortable seating for 6 to 8
is an oval, round, or boat shaped table
small chairs. Oval, round, or boat shaped tables
approximately 8 feet to 10 feet long,
may be proposed if they provide the best fit for
Break Room Table 1 standard table height, with seating capacity
dining, break time use, and informal staff
for 6 to 8 users. Preferred finish is Espresso
collaboration. Proposed table shall coordinate
laminate with a matching black frame.
with the overall appearance of the office furniture,
Example: N9NE SIGBS4236N METAL in
preferably in a matching Espresso finish, and shall
Espresso finish with black frame.
be appropriate for the available room dimensions
and intended daily use.
For small meeting or consultation use within
Small round meeting table suitable for 2 to 3
executive offices 101 and 115. Tables should
seats, with a 36" to 40" laminate top and
comfortably support 2 to 3 people for short
metal or laminate cross base. Table shall
meetings, discussions, or document review while
coordinate with the overall office furniture
Executive Office maintaining clear circulation, chair clearance, and
2 appearance, preferably with an Espresso
Small Table access to the primary desk area. Proposers may
laminate top and black base.
recommend round, square, or other freestanding
Basis of design is similar to N9NE PLT36R
table shapes and sizes that best fit the office
with compatible metal cross base
dimensions shown on the building plans and
PLTXBM24BLK.
coordinate with the overall furniture design.
8) Furniture Specifications by Location/Type
8.1 Private Office Height Adjustable Corner Desks
The City is seeking six freestanding height adjustable corner office workstations for private
office use. These desks are intended for staff offices where a larger work surface and sit stand
functionality are desired. The preferred configuration is a commercial grade electric height
adjustable corner workstation with a black base and Espresso laminate work surfaces that
coordinate with the overall office furniture package.
RFP 5730 Page 10 of 64
This is the opportunity summary page. It provides an overview of this opportunity and a preview of the attached documentation.