April 16, 2026
INVITATION TO BID
BL079-26
The Gwinnett County Board of Commissioners is soliciting competitive sealed bids from qualified
suppliers for the Purchase of Stormwater Pipe on an Annual Contract for the Department of Water
Resources.
Bids should be typed or submitted in ink and returned in a sealed container marked on the outside with the
BL# and Company Name. Bids will be received until 2:50 P.M. local time on May 19, 2026, at the Gwinnett
County Financial Services - Purchasing Division – 2nd Floor, 75 Langley Drive, Lawrenceville, Georgia
30046. Any bid received after this date and time will not be accepted. Bids will be publicly opened and read
at 3:00 P.M.
The bid opening will be virtual ONLY. To access the bid opening virtually, visit the following link:
https://gwinnettgov.webex.com/gwinnettgov/j.php?MTID=m23694808852d07eb3e187a6fe679d520
or dial 408-418-9388 and enter Meeting Number 23434712951##. Apparent bid results will be available
the following business day on the website www.GwinnettCounty.com.
Questions regarding bids should be directed to Jordan Mitchell, Purchasing Associate II, at
Jordan.Mitchell@GwinnettCounty.com or by calling 770-822-5491, no later than May 12, 2026. Bids are
legal and binding upon the vendor when submitted. All bids should be submitted in duplicate.
Gwinnett County does not discriminate on the basis of disability in the admission or access to its programs
or activities. Any requests for reasonable accommodations required by individuals to fully participate in
any open meeting, program or activity of Gwinnett County Government should be directed to the ADA
Coordinator at the Gwinnett County Justice and Administration Center, 770-822-8165.
The written bid documents supersede any verbal or written prior communications between the parties.
Award will be made to the supplier(s) submitting the lowest responsive and responsible bid. Gwinnett
County reserves the right to reject any or all bids to waive technicalities and to make an award deemed in
its best interest. Bids may be split or awarded in entirety. Gwinnett County reserves the option to negotiate
terms, conditions and pricing with the lowest responsive, responsible supplier(s) at its discretion.
Award notification will be posted after award on the County website, www.GwinnettCounty.com and
companies submitting a bid will be notified via email.
We look forward to your bid and appreciate your interest in Gwinnett County.
Jordan Mitchell
Purchasing Associate II
JM/km
The following pages should be returned in duplicate as your bid: Bid Schedule, Pages 5-8
References, Page 9
Contractor Affidavit, Page 10
Code of Ethics, Page 11
BL079-26
Page 2 of 21
I. GENERAL SPECIFICATIONS
A. Award for this contract may be divided into four (4) Sections to the lowest responsive and responsible bidder of
each section.
B. Unless otherwise specified, all items shall be in accordance with the Georgia Department of Transportation
Standard Specifications - Construction of Transportation Systems - 2013 Edition (or latest version) and all
supplements thereto and manufactured at Georgia D.O.T. certified plants. However, Gwinnett County reserves the
right to purchase products that may not strictly conform to the Georgia Department of Transportation
Specifications, provided they meet the specified ASTM requirements.
C. A contract, if awarded, will be on an "Open-End" type to provide for the requirements of Gwinnett County on an "as
needed" basis. It is impossible to determine the exact quantities of items that will be required during the term of
this contract. Unit prices shall include delivery to designated locations within the County.
D. Any defective items delivered to the designated sites will be rejected. The supplier shall remove such defective
items from the site and replace them, at no additional cost to the County, with acceptable items within the same
time frame as specified for original delivery.
E. For the items to be delivered in the most economical manner, the County reserves the right to make multiple awards,
utilizing the supplier that will be most advantageous to the County, price and other factors considered. Supplier
must include a packing slip and request signature of Gwinnett County employee at delivery.
F. The apparent silence of this specification and any supplemental specifications as to any details or the omission
from it of a detailed description concerning any point shall be regarded as meaning that only the best commercial
practices shall prevail, and that only first quality materials are to be utilized. All interpretations of this specification
shall be made upon the basis of this statement: The County interpretation to prevail.
G. Deliveries beyond the Contractual Period - Placing of orders: This contract covers all requirements that may be
ordered, as distinguished from delivered, during the contract term. This is for the purpose of providing continuity
by permitting the County to place orders as requirements arise in the normal course of operations. Accordingly,
any order e-mailed (or received, if forwarded by other means) to the supplier on or before the expiration date of the
contract and providing for delivery within the number of days specified in the contract, shall constitute a valid order.
H. The supplier is required to maintain complete records and make available to County auditors for the life of the
contract.
I. At the time of delivery, a "Certificate of Inspection" shall be submitted to the County certifying that all products and
materials have been inspected at the plant and meet the specifications in item # 1, above.
J. Successful supplier to notify Gwinnett County four (4) hours prior to delivery. For early morning deliveries,
notifications must be made on the afternoon before. Deliveries must be made during normal working hours for
County employees, 7:00 A.M. to 4:00 P.M. (with enough time allowed to unload).
II. PRODUCT SPECIFICATIONS
A. REINFORCED CIRCULAR CONCRETE PIPE
1. Pipe shall be delivered to the designated locations within fourteen (14) days from time order is placed. (With
the exception of Saturdays, Sundays, and holidays).
2. Unit prices shall include sufficient joint bitumastic material or rubber gasket and lubricant for the installation
for each length of pipe delivered.
3. Manufacturer shall provide 3" diameter lifting holes in all concrete pipe 24" diameter (or equivalent) and larger
when given a minimum seven (7) day notice by Gwinnett County. Lifting holes shall be present whenever
practical.
BL079-26
Page 3 of 21
4. Important: All concrete pipe sections must be interchangeable and compatible on both ends of each 8-foot
section with all other CRP, and existing pipe currently in Gwinnett County’s drainage system.
5. Pipe shall be Class 3 rated
B. HIGH DENSITY POLYETHYLENE PIPE (HDPE)
1. Pipe shall be delivered to the designated locations within fourteen (14) days from time order is placed. (With
the exception of Saturdays, Sundays, and holidays).
2. Pipe shall comply with AASHTO M294 - 12-30" (300-750 mm).
3. Pipe shall comply with ASTM F2648 - 4-30" (100-750 mm).
4. Ends shall be Watertight (ASTM D3212) Reinforced Integral Bell & Gasketed Spigot
5. Pipe shall be furnished with dual walls, interior shall be smooth walled, and exterior shall be corrugated.
6. Unit prices shall include sufficient high-performance pipe joint lubrication for installation for each segment of
pipe delivered.
C. CORRUGATED (Aluminized) STEEL PIPE AND BANDS SPECIFICATIONS
1. Pipe shall be delivered to the designated locations within fourteen (14) days from time order is placed (with the
exception of Saturdays, Sundays and holidays).
2. All pipe shall be furnished with one or two-piece connector bands of the same material (ie. aluminized pipe will
be furnished with aluminized bands), 14 gauge minimum, meeting the requirements of section 844 of the
standard specifications of the Georgia Department of Transportation. All pipes will be aluminized. No quote for
galvanized pipe will be accepted and will be considered non-responsive to the solicitation. Bituminous coated
bands shall be furnished. The successful bidder will furnish bands and hardware necessary for joining pipe at
no additional charge to Gwinnett County.
III. GDOT SPECIFICATIONS
All pipe must meet the following GDOT specifications:
844.2.01
Corrugated Steel Culvert Pipe and Pipe Arches
Corrugated Steel Culvert Pipe and Pipe Arches shall conform to the requirements of Type I or II culvert
pipe, AASHTO M 36, for the specified sectional dimensions, and thickness. Shop-formed elliptical pipe
and shop strutted pipe shall be furnished where specified.
844.2.02
Bituminous Coated Corrugated Steel Culvert Pipe
Bituminous Coated Corrugated Steel Pipe shall conform to the requirements of AASHTO: M190 for the
specified sectional dimensions, plate thickness and type of bituminous coating. Coupling bands shall
be fully coated with bituminous material. Shop-formed elliptical pipe and shop-strutted pipe shall be
furnished where specified.
844.2.06
Aluminum-Coated (Type 2) Corrugated Steel Pipe
Corrugated steel pipe shall conform to the fabrication requirements of AASHTO: M-36. The steel sheet
used in the fabrication shall conform for the requirements of AASHTO: M-274.
BL079-26
FAILURE TO RETURN THIS PAGE AS PART OF BID DOCUMENT MAY RESULT IN REJECTION.
BID SCHEDULE
FOB Destination Freight Prepaid & Allowed to:
Gwinnett County Department of Water Resources Central Facility Warehouse 684 Winder Hwy, Lawrenceville, GA 30045 or
Gwinnett County Department of Transportation, 620 Winder Hwy, Lawrenceville, GA 30045
ITEM
#
PIPE SIZE
(IN INCHES)
APPROX.
ANNUAL
QTY
(A)
Section A: Reinforced Circular Concrete Pipe
UNIT PRICE
(PER LINEAR FT.)
(B)
TOTAL PRICE
(A * B = TOTAL PRICE)
1 15” (8 ft. laying length)
160 LF
$
/lf $
2 18” (8 ft. laying length)
672 LF
$
/lf $
3 24” (8 ft. laying length)
416 LF
$
/lf $
4 30” (8 ft. laying length)
48 LF
$
/lf $
5 36” (8 ft. laying length)
48 LF
$
/lf $
6 42” (8 ft. laying length)
48 LF
$
/lf $
7 48” (8 ft. laying length)
48 LF
$
/lf $
8 54” (8 ft. laying length
8 LF
$
/lf $
9 60” (8 ft. laying length)
8 LF
$
/lf $
10 66” (8 ft. laying length)
8 LF
$
/lf $
11 72” (8 ft. laying length)
8 LF
$
/lf $
SECTION A TOTAL $
Section B: High Density Polyethylene Pipe (HDPE) (in accordance with ASTM STD F2648)
1 12” (20 ft. laying length)
20 LF
$
/lf $
2 15” (20 ft. laying length)
200 LF
$
/lf $
3 18” (20 ft. laying length)
200 LF
$
/lf $
4 24” (20 ft. laying length)
100 LF
$
/lf $
SECTION B TOTAL $
Page 4 of 21
COMPANY NAME
BL079-26
FAILURE TO RETURN THIS PAGE AS PART OF BID DOCUMENT MAY RESULT IN REJECTION.
BID SCHEDULE (CONTINUED)
ITEM
#
PIPE SIZE
(IN INCHES)
APPROX.
ANNUAL QTY
(A)
UNIT PRICE
(PER LINEAR FT.)
(B)
Section C: Corrugated Metal Full Round Pipe 2 2/3” X 1/2" Corrugation – Annular End - Aluminized
1 12” – 14 Guage
40 LF
$
/lf $
2 15” – 14 Guage
620 LF
$
/lf $
3 18” – 14 Guage
1,320 LF $
/lf $
4 21” – 14 Guage
20 LF
$
/lf $
5 24” – 14 Guage
6 30” – 14 Guage
660 LF
$
60 LF
$
/lf $
/lf $
7 36” – 14 Guage
200 LF
$
/lf $
8 42” – 14 Guage
9 48” – 14 Guage
20 LF
$
20 LF
$
/lf $
/lf $
10 15” CMP Flared End Section
11 18” CMP Flared End Section
12 24” CMP Flared End Section
18 EA
$
28 EA
$
16 EA
$
/ea $
/ea $
/ea $
SECTION C TOTAL $
TOTAL PRICE
(A * B = TOTAL PRICE)
Page 5 of 21
COMPANY NAME
This is the opportunity summary page. It provides an overview of this opportunity and a preview of the attached documentation.