SCBA - Ten (10) Self-Contained Breathing Apparatus Machines

CITY OF FRANKFORT

TABLE OF CONTENTS

Bid # 2526001-42

Cover page and Legal Advertisement

Contract Agreement

I. Scope of Work

II. General Instructions to Bidders

III. General Terms and Conditions

IV. Technical Specifications

V. Proposal Form

CITY OF FRANKFORT INVITATION FOR BIDS

BID # 22526001-42

The City of Frankfort will receive sealed bids for Ten (10) Self-Contained Breathing Apparatus Machines commencing with the execution of a contract between the City and the successful bidder. Bids will be received in the Finance Department, City Hall, 315 West Second Street, Frankfort, Kentucky, until 2:00 p.m. EST, Thursday April 2, 2026.

PHYSICAL BIDS: All bids must be submitted to the Purchasing Division, Office of the Purchasing Division, City Hall, 315 West Second St., Frankfort, KY, no later than 2:00 pm EST on the date of bid opening. Bids cannot be accepted at any other location. Bids must be received by the designated date and time, and none will be considered thereafter.

ELECTRONIC BIDS: Electronic Bids/Proposals submitted through DemandStar will also be accepted for this project. Bids/Proposals must be signed and submitted in the same required format. Submit one (1) electronic copy if using E-Bidding. After uploading your proposal, Proposers are encouraged to verify that the document was uploaded successfully. Bids must be received by the designated date and time, and none will be considered thereafter.

Bids/Proposals will be prepared in accordance with the specifications detailed in the Bid/Proposal documents. They are available at no charge with registration through DemandStar (https://www.demandstar.com/registration), or a copy can be obtained from the Office of the Purchasing Division, City Hall, 315 West Second St., Frankfort, KY.

The City of Frankfort, Kentucky, reserves the right to reject any and all bids received and to select that bid which it determines to be in its best interest. The award of this bid will be made on the basis of the lowest and best evaluated bid price.

Bidders are to submit their bids in sealed envelopes; each bidder is advised to clearly mark the sealed bid with the bid number and description listed above. The City of Frankfort, Kentucky, is not responsible for the premature opening of, or the failure to open, a sealed bid that is not properly addressed or identified.

Bidders are invited to attend the opening of the submitted bids.

FOR THE CITY OF FRANKFORT, KENTUCKY

Angie Disponette, Purchasing Agent

CONTRACT AGREEMENT

This contract made and entered into this day of April, 2026, between the City of Frankfort, Kentucky, First Party, and , Second Party.

WITNESSETH:

That for and in consideration of the payment by the City of Frankfort of the amounts due Second Party as set forth in Second Party’s successful bid, which has been accepted by the City of Frankfort, Second party agrees to provide seven (7) Self Contained Breathing Avenue, in accordance with the specifications set forth in the City of Frankfort’s Invitation for Bids, Bid # 22526001-42 and further agrees that Sections I, II, III, IV and V and the prices set forth in Section VI of said Invitation for Bids are incorporated by reference as terms of this Contract as if fully set forth herein.

It is understood that both parties must agree in writing to any revisions, additions, or deletions to this Contract.

First Party:

City Of Frankfort, Kentucky

By:

Title: Mayor

ATTEST

(Title)

Second Party:

By:

Title:

ATTEST

(Title)

I. SCOPE OF WORK

The City of Frankfort intends to issue a contract for ten (10) SCBAs for the Frankfort Fire Department’s located at 300 West Second ST, commencing with the execution of a contract with the successful bidder. The contract and purchase order shall be issued to the lowest and best-evaluated bidder responding to this invitation to bid. The contract shall contain the specifications stated in Section IV - PROPOSAL SPECIFICATIONS, and Section V - TECHNICAL SPECIFICATIONS, of this invitation. The City’s Purchasing Agent shall notify the successful bidder.

The successful Bidder shall, upon completion of the work, provide a report detailing the quantity of dewatered sludge and manifests documenting that the dewatered sludge has been disposed of in accordance with local, state, and federal laws and regulations. This report shall be submitted to the City with the invoice.

END OF SECTION

II. GENERAL INSTRUCTIONS TO BIDDERS

1. Bid Identification

Bidders are encouraged to submit their bid in the envelope provided by the Purchasing Office as part of their bid package. If the bidder is unable to use the provided envelope, the bid shall be returned in a sealed envelope and have typed on the outside Bid or Quotation Number, Opening Time, and Date. This instruction is provided as a means to ensure proper delivery, handling, and public announcement of a bidder’s response at the official bid opening date and time. No responsibility will attach to the City of Frankfort for a premature opening of, or failure to open, a bid that is not properly addressed or identified. Bids in the form of telegrams, telephone calls, facsimiles, or telex messages will not be accepted.

2. Bid Submission

Each bid shall be signed and submitted with the understanding that the bid is firm for the sixty (60) days immediately following the date of opening of the bids. Bids must be submitted on the attached form and signed in ink by an authorized individual of the company or corporation. At the end of the sixty-day period, the bid may be withdrawn at the written request of the bidder. If the bid is not withdrawn, it will remain in effect until an award is made or the bid offering is canceled. Responses received after the deadline will not be considered.

3. Right to Reject and Award Bid

The City of Frankfort, Kentucky, reserves the right to reject any and all bids received in response to this bid offering and to waive any informality in this bid offering. The award of a contract shall be at the sole discretion of the City of Frankfort, Kentucky. The award will be made to the responsible bidder whose bid is determined to be the most advantageous to the City, taking into consideration the evaluation factors set forth in this bid package, if any. The City of Frankfort may make the award without further discussion of the bids submitted. Therefore, the bid should be submitted initially on the most favorable terms that the bidder can bid with respect to price, product, service, and technical capability. The contents of the bid of the selected bidder will become the basis for the City of Frankfort, Kentucky’s contractual obligation when the award is made.

4. Bid Retraction

Bidders are advised that bids submitted as part of this bid offering may not be withdrawn for a minimum of 60 days following the public bid opening unless circumstances justify consideration by the Finance Director of a release from this provision. Requests to withdraw a bid must be in writing and received by the City of Frankfort, Kentucky, within twenty-four hours of the public bid opening.

5. Basis of Selection

The bid award will be based on the best bid received from those bidders as determined to be responsible and responsive to the invitation, provided that the bids are reasonable and in the best interest of the City to do so. The delivery time schedule must be definite.

6. Sales Tax

a) If this Bid is for the purchase and installation of materials or equipment, and if you are a Contractor as defined by 103 KAR 26:070, Section 2, and are required to pay Sales Tax on materials or equipment purchased by you from your suppliers, then the Sales Tax should be included as a part of your Bid price.

b) If this Bid is for the direct sale of materials or equipment to the City of Frankfort, and if you are a retailer or hold a valid Resale Certificate from the State of Kentucky, then the Bid price should not include any Sales Tax

7. Documentation

Return the original document with the bid response.

8. Late Submissions

See General Terms and Conditions.

9. Specifications

All services provided or materials purchased and delivered by the vendor shall meet the City’s specifications, including amendments and revisions, hereto issued prior to the date of bid opening.

10. Completion/Delivery Schedule

If applicable, each bidder shall state as part of the bid, a time schedule for delivery of the components required by the City. The number of calendar days required for delivery shall be considered in the bid award.

11. Business Tax Status

In order to receive a bid award from the City of Frankfort, Kentucky, a bidder must not be delinquent on any business, regulatory, and/or ad valorem taxes due to the City for real or personal properties owned by the bidder, including penalty and interest charges, or any one or more of its corporate officers. Inquiries can be directed to the Finance Department, City Hall, 502-875-8500.

12. Questions and Addenda

This bid is offered by the Purchasing Office. Bidders shall carefully examine this bid and any addenda issued by the Purchasing Office. Bidders shall seek clarification of any ambiguity, conflict, omission, or other error in this bid “in writing.” Oral comments or communications do not form any part of this bid offering. Questions should be addressed in writing to the Purchasing Agent. If the answer materially affects this procurement, the information will be issued in an addendum. Written communications should be addressed as follows:

City of Frankfort Purchasing Office

P.O. Box 697

Frankfort, Kentucky 40601-0697

13. Retention of Records

The successful bidder shall be required to maintain, for a period of five (5) years from the date of final payment to the bidder, all books and records pertaining to this bid offering.

14. Business Status and Registration Requirements

In order to receive a bid award from the City of Frankfort, Kentucky, a bidder must be properly registered with the Occupational License Division to do business in the City. If a bidder is already registered, all of their applicable license accounts must be in “good standing” with the City. Good standing is defined as having all fees, including penalty and interest charges, relating to employee wages, and business net profits, paid in full with appropriate reporting forms filed in the offices of the City’s License Division. Inquiries can be directed to the License Division, City Hall, 502-875-8500. (This clause is only for firms bidding to perform actual business in the City, not delivering equipment. This is also only relevant if the bidder is awarded the bid.)

15. Conflicts, Gratuities, and Kick-Backs Prohibited

The City of Frankfort, Kentucky, adheres to the provisions of KRS 45A.455, paragraphs (1) through (5) relative to conflicts of interest, gratuities, kick-backs, and use of confidential information in all bid offerings.

16. Cost Incurred in Responding

This bid offering does not commit the City of Frankfort, Kentucky, to pay any costs incurred in the preparation and submission of bids or in making necessary studies or designs, nor does it commit the City of Frankfort, Kentucky, to enter into a contract.

17. Disposition of Bids

All materials submitted in response to this bid offering will become the property of the City of Frankfort, Kentucky. One (1) copy of each bid shall be retained for the official files and will become a public record after an award is made by the City of Frankfort, Kentucky, and thus open for public inspection. It is understood that the bid will become a part of the official file without obligation on the part of the City of Frankfort, Kentucky.

18. Insurance Requirements

Prior to commencement of work, the City of Frankfort requires all Vendors to submit a Certificate of Insurance to the City of Frankfort’s Procurement Agent (and other parties upon request) in the form of a standard Acord Form 25 that fully complies with the requirements of our contract agreement. Failure to provide the certificate with the proper coverage and limits will result in delayed payment to the Vendor. The following is an outline of the Insurance requirements that must be provided and so indicated on the Certificate of Insurance.

Commercial General Liability (CGL) with limits of insurance not less than:

• $1,000,000 Each Occurrence and $2,000,000 General Aggregate

• $1,000,000 Personal Injury and Advertising Injury

i. The General Aggregate shall apply separately to each project per ISO form CG2503 (11/85) or its equivalent.

ii. CGL coverage shall be written on ISO occurrence form CG0001(04/13) or a substitute form providing equivalent coverage and shall cover liability arising from:

• Premises/Operations

• Personal Injury / Advertising Injury

• Products-Completed Operations

• Liability assumed under an Insured contract (including tort liability of another assumed in a business contract)

• Independent Contractors

Certificate Requirements

Certificate Holder:

City of Frankfort

315 W. Second Street

Frankfort, KY 40601

General Liability policy must be endorsed to provide that there will be no cancellation or reduction in coverage without thirty (30) days' prior written notice given to the City of Frankfort.

Certificate of Insurance should be mailed to the corporate office of the City of Frankfort, attention of the Finance Department. If applicable to a specific project, reference the project number and project name on the Certificate. Copies of the Certificate forms showing compliance with the insurance requirements must be provided prior to commencement of work.

19. Disclosure

In compliance with Kentucky Revised Statutes, Chapter 45A, and the Kentucky Open Records Act, trade secrets or proprietary information submitted by a bidder in connection with this procurement shall not be subject to public disclosure. However, the bidder must invoke this protection prior to or upon submission of the data or other material and must identify the specific area or scope of data or other materials to be protected and state the reasons why protection is necessary.

20. Prime Bidder Responsibilities

If the bidder’s response includes goods and services provided by others, the bidder will be required to act as the prime contractor for all such items and must assume full responsibility for the procurement, delivery, and quality of such goods and services. The bidder will be considered the sole point of contact with regard to all stipulations, including payment of all charges and the meeting of all contractual requirements resulting from this bid offering.

21. Inquiries and Additional Information

Any questions may be referred to the City of Frankfort Purchasing Agent at 502-352-2101. 

END OF SECTION

III. GENERAL TERMS AND CONDITIONS

1. Applicable Laws and Regulations. The bidder’s attention is directed to the fact that all applicable Laws of the Commonwealth of Kentucky, Municipal Ordinances, and the rules and regulations of the City shall apply to this invitation and contractual documents that may result from the award of this invitation. Any litigation with respect thereto shall be brought in the courts of the Commonwealth of Kentucky, and Kentucky Law shall govern.

2. Exceptions. Bidders taking exceptions to any part or section of the Invitation shall indicate such exceptions on the bid form. Failure to indicate any such exception will be interpreted as the bidder's intent to comply fully with the requirements as written. Conditional or qualified bids, unless specifically allowed, shall be subject to rejection in whole or in part.

3. Oral Statements. No oral statement shall modify or otherwise affect the terms, conditions, or specifications stated in the invitation or ensuing contract. Modifications will be written.

4. Bid Acceptance Period. Any bid submitted as a result of the solicitation shall be binding on the bidder for a period of sixty (60) calendar days following the opening date. Any quote for which the bidder specifies a shorter acceptance period may be rejected.

5. Ethics in Public Contracting. The bidder certifies that its bid was made without collusion or fraud; that it has not offered or received any kickbacks or inducements from any other bidder, supplier, manufacturer, or subcontractor in connection with the bid; and that it has not conferred on any public employee having official responsibility for this procurement transaction any payment, loan, subscription, advance, deposit of money, services, or anything of more than nominal value.

6. Late Submissions. A bid received at the place designated in the invitation for the receipt of bids after the exact time specified for receipt will not be considered unless it is the only bid received, or it is received before the award is made, and was sent by registered or certified mail not later than the fifth calendar day before the date specified for receipt of bids. The City must determine that the late bid was due solely to mishandling by the City after receipt at the specified address.

7. Informalities and Irregularities. The City has the right to waive minor defects or variations of a quote from the exact requirements of the specifications that do not affect the price, quality, quantity, delivery, or performance time of the services being procured. If insufficient information is submitted by a bidder, (with the bid) for the City to properly evaluate the bid, the City has the right to require such additional information as it may deem necessary after the time set for receipt of quotes, provided that the information requested does not change the price, quality, quantity, delivery, or performance time of the services being procured.

8. Indemnification. The bidder covenants to save, defend, keep harmless, and indemnify the City and all of its officers, departments, agencies agents, and employees from and against all claims, loss damage, injury, fines penalties, and cost - including court costs and attorney's fees, charges, liability, and exposure, however caused - resulting from, arising out of, or in any way connected with the bidder’s negligent performance or nonperformance of the terms of the contract.

9. Termination. The performance of work under the contract may be terminated by the City in whole or in part whenever the City determines that the termination is in the best interest of the City. Any such termination shall be effected by the delivery to the contractor of a written notice of termination at least fifteen (15) days before the date of the termination, specifying the extent to which performance of the work under contract is terminated.

10. Drawings, Sketches, and Technical Data Information. Bidders are encouraged to submit any and all technical data necessary to support their bid. Additional generic literature on the item bid, i.e., marketing, sales, and so forth, may also be submitted.

11. Warranties of Quality. Bidder warrants that the goods and services provided pursuant to the Proposal Specification shall conform to all affirmations of fact or promises made by bidder, descriptions, samples, specifications and appropriate industry and workmanship. In addition, the bidder warrants that said goods and services are merchantable and are fit for the ordinary purposes for which such goods and services are used. In the event of a breach of any of the foregoing warranties, bidder shall expeditiously, as that term is defined by the City, and at its own expense but at the sole option of the City, repair or replace the goods and services to comply with said warranties. The foregoing warranties shall apply to any and all repaired or replacement goods and services provided hereunder. Additional warranty requirements are incorporated in Article IV, Technical SPECIFICATIONS.

12. Additional Clauses Incorporated by Reference

a. OSHA 1970 (Public law 91-596) Safety Standards and Accident Prevention

b. KRS 45.610 – Hiring Minorities and Women

c. KRS 45.620 – Actions Against Contractor - Hiring Minorities and Women

d. KRS 45.630 – Termination of Existing Employees

e. KRS 45.640 – Reporting Compliance Breech

f. KRS 65.140 – Time for Payment

g. KRS 45-570; 45.590 – Nondiscrimination Clause

13. Bid Distribution: Bid shall be made out in three (3) copies and returned per instructions in preamble.

14. Questions On Bid Documents: All matters, regardless of the nature, regarding this bid invitation shall be submitted to the Purchasing Agent, City of Frankfort, 315 W. Second Street, Frankfort, KY 40601, telephone number (502) 352-2101.

15. Warranties of Title: Supplier warrants that it has title to and the proprietary right to provide the goods pursuant to the contract. Supplier shall at its own expense either defend or settle with the prior approval of the City, any suit, claim, or action against the City based on an allegation that the goods or the use thereof constitutes a patent, copyright, trade secret, or other intellectual property right infringement. Supplier shall pay all amounts assessed against the City in just suit, claim, or action and shall reimburse the City of any damages, direct or consequential, incurred as a result of such suit, claim, or action, including the City’s expenses incurred by participating in the defense or settlement thereof. In the event the goods are held to constitute an infringement in such suit, claim or action or their continued use is enjoined, Supplier shall at its own expense and at the option of the City, either: a) procure for the City the right to continue using the goods, b) replace the goods with equivalent noninfringing goods which are acceptable to the City, or c) modify the goods in a manner which is acceptable to the City, so they become noninfringing.

16. Nonwaiver Of Rights: No delay or omission by the City to excise any right in the contract at law or in equity shall constitute a waiver of such right or any other right in the contract at law or in equity.

17. Warranty of Price: Supplier warrants that the prices for the goods provided to the City pursuant to the contract are not less favorable than those prices currently in effect with other customers of Supplier for the same or similar goods in similar quantities. In the event Supplier reduces its prices for such goods prior to the completion of the contract, Supplier shall reduce the prices in the contract correspondingly. Supplier warrants that the prices in the contract shall be complete and no additional charges of any type, including but not limited to shipping, packaging, labeling, custom duties, storage, insurance, boxing and crating, shall be added without the prior written consent of the City.

18. Setoff: All claims for money due or to become due from the City shall be subject to deduction or setoff by the City by reason of any counterclaim or cross claim arising out of this or any other transaction with Supplier.

19. Compliance With Laws: Supplier shall comply with all federal, state and local laws, rules, City ordinances and regulations, Presidential directives and executive orders that are or may in the future become applicable to Supplier or the subject matter of the contract and all such federal, state and local laws, rules, City ordinances and regulations, Presidential directives and executive orders are hereby incorporated herein by this reference.

20. Certification Of No Bid Rigging: Supplier certifies to the City that Supplier has not combined or conspired with any other person to reduce or eliminate competition in the bidding of the contract, the effects of which would constitute an unreasonable restraint of trade or commerce.

21. Merger Clause: Unless it has been issued by the City in response to an offer by Supplier, this contract, including any exhibits or documents incorporated herein by reference, constitutes the find written expression of all the terms and conditions of the contract between Supplier and the City and is a complete and exclusive statement of those terms and conditions and supersedes all prior negotiations, representations or agreements, either written or oral, with respect to the subject matter of the contract, except those representations relating to warranties of quality. This contract may only be modified in writing by the City.

22. Kentucky Residential Bidder Preference: The Kentucky Residential Bidder Preference laws, KRS 45A.490 to 45A.494 and 200 KAR 5:400, apply to a contract awarded pursuant to this Invitation for Bids, and are hereby incorporated by reference.

23. Local Purchasing Preference: Applicable provisions of the Local Purchasing Preference located in City of Frankfort Code of Ordinances §38.01 to 38.04 apply to a contract awarded pursuant to this Invitation for Bids.

END OF SECTION

IV: TECHNICAL SPECIFICATIONS

3M Scott Air-Pak X3 Pro SCBA

(Built-to Specification on last page)

Self-Contained Breathing Apparatus Requirements

• The SCBA shall consist of the following major sub-assemblies: (1) a removable, positive pressure mask-mounted regulator with air-saver switch; (2) an automatic dual path redundant pressure reducer; (3) end-of-service time indicators; (4) a harness and backframe assembly for supporting the equipment on the body of the wearer; (5) a shoulder strap mounted, remote gauge indicating cylinder pressure; (6) a rapid intervention crew/universal air connection (RIC/UAC); (7) a personal alert safety system (PASS); and (8) cylinder and valve assembly for storing breathing air under pressure.

Regulatory Approvals

• The SCBA shall be approved to NIOSH 42 CFR, Part 84 as an open circuit, pressure-demand self-contained breathing apparatus.

• The SCBA shall be certified to NFPA 1981, Standard on Open-Circuit Self-Contained Breathing Apparatus for Emergency Services, 2018 Edition.

• The SCBA shall be certified to NFPA 1982, Standard on Personal Alert Safety Systems, 2018 Edition, when configured with a PASS device.

• All components shall be approved for Intrinsic Safety under UL 913 Class I, Groups C and D, Class II, Groups E, F and G, Hazardous locations.

• The SCBA shall maintain all NIOSH standards with any of the types of cylinders listed as provided by the SCBA manufacturer.

Required Components

Regulator – E-Z Flo+

• The mask-mounted regulator shall maintain positive pressure during flows of up to 500 standard liters per minute.

• The mask-mounted regulator shall incorporate an inline quick disconnect coupling.

• The quick disconnect coupling shall be easily connected and disconnected by trained individuals with a gloved hand and in limited visibility conditions.

• The quick disconnect coupling shall be guarded against inadvertent disconnection during use of the equipment.

• The low-pressure hose shall be equipped with a swivel attachment at the mask-mounted regulator.

• The mask-mounted regulator shall connect to the facepiece by way of a quarter (1/4) turn rotation.

• A latch mechanism shall lock the mask-mounted regulator in place to prevent inadvertent rotation.

• An audible click shall provide notification that the mask-mounted regulator is securely attached to the facepiece.

• The mask-mounted regulator shall be equipped with a gasket to provide a seal against the mating surface of the facepiece.

• The mask-mounted regulator shall contain an air-saver switch to prevent airflow when disconnected from the facepiece.

• The mask-mounted regulator shall reactivate and supply air only in the positive pressure mode when the wearer affects a face seal and inhales.

• The mask-mounted regulator shall have a demand valve to deliver air to the user, activated by a diaphragm responsive to respiration.

• The diaphragm shall include an integrated exhalation valve.

• The mask-mounted regulator shall include a purge valve for use as an emergency bypass.

• The mask-mounted regulator shall be designed to direct the incoming air through a spray bar and over the inner surface of the facepiece lens for defogging purposes.

• The mask-mounted regulator shall incorporate a Heads-Up Display (HUD) to provide visual alerts to the SCBA user of air status and PASS alarm conditions.

• The mask-mounted regulator shall incorporate a latch mechanism to enable removal from the facepiece.

• The mask-mounted regulator shall require pulling back of the thumb latch and a quarter (1/4) turn rotation for removal from the facepiece

Pressure Reducer with CGA Cylinder Connection

• The pressure reducer shall be mounted at the waist on the backframe and be coupled to the cylinder valve through a short length of internally-armored, high-pressure hose with a hand coupling for engagement and sealing within the cylinder valve outlet.

• In lieu of a manual by-pass, the pressure reducer shall include a back-up pressure reducer connected in parallel with the primary pressure reducer and an automatic transfer valve for redundant control.

• The back-up pressure reducer shall also be the means of activating the low-pressure alarm devices in the mask-mounted regulator.

• The low-pressure alarm warning shall denote a switch from the primary pressure reducer to the back-up pressure reducer whether from a malfunction of the primary pressure reducer or from low cylinder supply pressure.

• A press-to-test valve shall be included to allow functional testing of the back-up pressure reducer.

• The pressure reducer shall have incorporated a resettable over-pressurization relief valve which shall prevent the attached low-pressure hose and mask-mounted regulator from being subjected to high pressure.

End-of-Service Time Indicator (EOSTI)

• The SCBA shall have two end-of-service time indicators (EOSTI). One shall be both a tactile and audible alarm, and one shall be a Heads-Up Display (HUD).

• The primary EOSTI shall be the integral low-pressure alarm device that shall combine an audible alarm with simultaneous vibration of the facepiece.

• The primary EOSTI shall be located in the positive pressure mask-mounted regulator.

• This alarm device shall indicate either low cylinder pressure (35% +/- 2%) or a malfunction of the primary pressure reducer.

• The HUD shall serve as the secondary EOSTI.

• The HUD shall be powered by the SCBA’s single power supply.

• The HUD shall be mounted in the user’s field of vision on the positive pressure mask-mounted regulator.

• The HUD shall display cylinder pressure in increments of 100%, 75%, 50% and 35% (+/- 2%).

• The display shall not have a numerical representation of cylinder pressure.

• At greater than three quarters cylinder pressure, two green Light Emitting Diodes (LED) shall be illuminated.

• Between three quarters and one-half cylinder pressure, one green LED shall be illuminated.

• Between one-half and 35% (+/- 2%) cylinder pressure, one “yellow” LED shall be illuminated and flash at a rate not less than one (1x) time per second.

• At 35% (+/- 2%) or less cylinder pressure, one “red” LED shall be illuminated and flash at a rate to exceed ten times (10x) per second.

• The HUD shall have a low battery indication that is distinct and distinguishable from the cylinder pressure indications.

Backframe and Harness Assembly

• A lightweight, lumbar support style backframe and harness assembly shall be used to carry the cylinder and valve assembly and the pressure-reducing regulator assembly.

• The backframe shall be a solid, one-piece black powder-coated aluminum alloy frame that is contoured to follow the shape of the user’s back.

• The backframe shall include a shroud to streamline hose and wire management by minimizing exposure of the low-pressure hose and electronics molded cable.

• The backframe shall include an over-the-center, adjustable tri-slide fixture, a para-aramid strap and a double-locking latch assembly to secure 30, 45 or 60-minute cylinders.

• The harness assembly shall include a waist pad and shoulder pads constructed of an outer shell material and incorporating a closed-cell foam design to help minimize water and contaminant absorption.

• The harness assembly shall incorporate parachute-type, quick-release buckles with an integrated bail to help secure the webbing.

• The harness assembly shall consist of a one-size, black, para-aramid strap with two red stripes along the outer edges and a reflective stripe in the center for enhanced visibility.

• The harness assembly shall include a seat-belt type waist belt attachment.

• The harness assembly shall include box-stitched construction with no screws or bolts.

• The harness assembly shall be removable from the backframe without the use of tools.

• The harness assembly shall be machine washable to help with contaminant exposure reduction.

• The harness assembly shall accommodate a waist belt extension.

• The waist pad shall be attached to the backframe such that movement by the wearer provides natural articulation. Articulation shall be accomplished without the use of mechanical devices.

• The waist pad and belt shall freely wrap around and conform to the user’s hips.

• The shoulder harness shall be fitted with a Drag Rescue Loop (DRL) capable of being deployed in an emergency to drag a downed wearer to safety.

• The DRL shall be sewn into the shoulder harness assembly and shall provide a horizontal pull strength of 1000 lbs.

• The DRL shall be stored in a manner to prevent accidental snag but maintain accessibility with gloved hands.

• The shoulder harness shall be attached to the backframe such that the harness presents itself for ease of donning.

• The shoulder harness shall include reflective material to enhance the visibility of the user in low-light conditions.

• The shoulder harness shall accommodate two distinct positions for a chest strap attachment.

Rapid Intervention Crew / Universal Air Connection (RIC/UAC)

• The SCBA shall incorporate a RIC/UAC fitting to be compliant with the NFPA 1981, 2018 Edition standard.

• The RIC/UAC shall be an integral part of the pressure reducer and protected by the backframe.

• The RIC/UAC inlet connection shall be within 4” (4-inches) of the cylinder valve.

• The self-resetting relief valve shall be color-coded to identify pressure rating of the SCBA.

• The RIC/UAC shall have a check valve to prevent the loss of air when the high-pressure air source has been disconnected.

Personal Alert Safety System (PASS)

• The PASS Device shall be certified to NFPA 1982, Standard on Personal Alert Safety Systems, 2018 Edition.

• Operation of this distress alarm shall be initiated with the opening of the valve of a charged SCBA cylinder.

• The system shall feature a “hands-free” reset capability that may be activated by means of a slight movement of the SCBA when the system is in a pre-alarm mode.

• The system shall operate from a single power source containing six “AA” batteries.

• The system shall have a battery check function that provides an LED indication of battery status while the SCBA is not pressurized.

• When the PASS is manually activated, the locator system shall immediately emit a 2.4 GHz signal able to be received by a separate hand-held receiver.

• When the PASS is activated due to lack of motion, the locator system shall have a ten second delay prior to emitting a 2.4 GHz signal able to be received by a separate hand-held receiver.

• The locating system shall be programmable with eight alpha-numeric characters to provide identification information.

• The PASS device shall contain two components: a Console and a Sensor Module.

• When the PASS device goes into pre-alarm, the user shall be notified through a distinct light pattern in the HUD display located on the mask-mounted regulator.

• Console

• The console shall be located on the user’s right shoulder harness.

• The control console shall come with a mechanical (analog) pressure gauge that is angled at 30°.

• The console shall contain an integral, edge-lit, mechanical pressure gauge that is automatically turned on by opening the cylinder valve.

• The console shall display to the user the following:

• Pre-Alarm: alternating red flashing LEDs;

• Full Alarm: dual flashing red LEDs and a flashing PASS icon;

• Low Battery: red flashing LEDs;

• Normal System Operation: flashing green LED.

• The console shall contain a photo sensing diode that automatically adjust the brightness of the HUD as the ambient lighting conditions change.

• The console shall contain an integrated RFID tag.

• The console shall contain push buttons for user interface.

• The push buttons shall be designed to minimize accidental activation.

• A yellow color-coded push button shall permit system reset.

• A red color-coded push button shall permit manual activation of the full alarm mode.

• The console shall be equipped with an LED “External HUD” allowing others to determine the user’s cylinder pressure through the same color-code scheme as the HUD display on the mask-mounted regulator.

• A green LED shall be illuminated across the gauge face to indicate a cylinder with greater than half cylinder pressure.

• A yellow LED shall be illuminated across the gauge face to indicate a cylinder with less than half cylinder pressure.

• A red LED shall be illuminated across the gauge face to indicate a cylinder with less than 35% (+/- 2%) of the rated cylinder pressure.

• Sensor Module

• The system shall include a sensor module mounted to the SCBA backframe and located in an area between the cylinder and backframe in a manner designed to protect the assembly from damage.

• The sensor module shall contain a motion sensor that is sensitive to user hip movement to reduce false activations.

• The sensor module shall contain redundant, dual sound emitters for the audible alarm and dual visual “buddy” indicator lights.

• The sensor module sound emitters shall be oriented in multi-directions for optimal sound projection.

• The sensor module sound emitters shall broadcast a unique alarm tone for the following conditions:

• Pre-alarm PASS

• Full-alarm PASS

• Low battery

• The visual indicators on the backframe-mounted sensor module shall flash green during normal operation.

• The visual indicators shall flash red when the device is in pre-alarm and full-alarm.

• The visual indicators shall flash orange when the SCBA has reached one-half cylinder pressure.

• The visual indicators shall flash a combination of red, green, and white when the SCBA has reached 35% (+/- 2%) of the rated cylinder pressure.

• The sensor module shall have a Bluetooth® chipset integral to the unit to provide wireless connectivity to external devices.

• Warranty

• The SCBA shall be covered by a warranty providing protection against defects in materials and workmanship.

• The warranty period shall be for as long as the SCBA is owned by the original purchaser.

• This warranty shall not require a registration in order to activate.

• This warranty shall not be contingent upon completing mandatory overhaul or recommended preventative maintenance.

V. PROPOSAL FORM - Bid # 22526001-42

I (We) of ,

propose to furnish to the City of Frankfort, Kentucky, after the acceptance of this Proposal by the City, ten (10) SCBAs in accordance with the attached specifications. Bid Prices as shown on Page 2 of the Proposal Form, are good for one hundred eighty (180) days from the execution of this contract.

Prices are to be F.O.B. Destination – FRANKFORT, KENTUCKY. Delivery shall be made to: Frankfort Fire Department

300 West Second St

Frankfort, Kentucky 40601

After receipt of an order specify, DELIVERY TIME; TERMS; EXCEPTIONS TO SPECIFICATIONS:

NAME:

COMPANY:

ADDRESS:

ADDRESS:

PHONE #

(For Ordering Purposes Only)

CITY: , STATE , ZIP

EMAIL ADDRESS:

DATE:

END OF SECTION

V. PROPOSAL FORM - Bid # 22526001-42

Ten (10) Self-Contained Breathing Apparatus

$________________________________________________________________

END OF SECTION

VI. CONTRACT AGREEMENT

This contract made and entered into this day of April, 2026, between the City of Frankfort, Kentucky, First Party, and , Second Party.

WITNESSETH:

That for and in consideration of the payment by the City of Frankfort of the amounts due Second Party as set forth in Second Party’s successful bid, which has been accepted by the City of Frankfort, Second party agrees to provide services for handling, hauling, and disposal of sludge located at the Frankfort Sewer Department’s Wastewater Treatment Plant, located at 1200 Kentucky Avenue, in accordance with the specifications set forth in the City of Frankfort’s Invitation for Bids, Bid # 22526002-68 and further agrees that Sections I, II, III, IV and V and the prices set forth in Section VI of said Invitation for Bids are incorporated by reference as terms of this Contract as if fully set forth herein.

It is understood that both parties must agree in writing to any revisions, additions, or deletions to this Contract.

First Party:

City Of Frankfort, Kentucky

By:

Title: Mayor

ATTEST

(Title)

Second Party:

By:

Title:

ATTEST