MAPLE DD FY25_Doors, Hatches, Scuttles

Active

Contract Opportunity

this is to be awarded based off lowest price technically acceptable and past preformance.

USCGC MAPLE (WLB 207)

SPECIFICATION FOR FABRICATION OF WATERTIGHT DOORS, HATCHES, AND SCUTTLES

FY2025

Developed By: Jason W. Taylor

(Rev-0, 11 March 2025)

TABLE OF CONTENTS

Revisions Record. iii

Consolidated List of References. iv

WORK ITEM 1: Fabrication of Water Tight and Non Water Tight Doors, Hatches, and Scuttles 5

Revisions Record

This page is used to record specification revisions, which may have occurred subsequent to a Revision 0 (Rev-0) package. Information listed is intended to provide contractors and field unit personnel a means to ensure all the current specification revision pages are present when reviewing or utilizing this specification package.

DATE

REV#

WORK ITEM#

CHANGES MADE

NOTE : All work item and paragraph numbers listed above for a given revision correspond to same numbers in the previous revision. This revised specification is self-contained with all of the above listed changes incorporated.

Consolidated List of References

The below-listed documents form a part of this specification to the extent specified herein. Approval/publication dates or revision dates/numbers are also identified, to ensure that same document versions are used at the time of specification writing and during contract execution.

All Coast guard drawings, technical publications, and standard specifications will be provided to contractors by the Coast Guard at an appropriate time, or upon request, free of charge. Other Government documents may be accessed – free of charge – from links located on the SFLC website. Commercial sites provide access to their respective documents.

COAST GUARD DRAWINGS

Coast Guard Drawing 225B WLB 167-001, Rev-R, Structural Closures

Coast Guard Drawing 225B-WLB-631-001, Rev G, 2000, Paint Schedule

NAVSEA Drawing 167-7379842, Rev A, Procedure & Welding Sequence for Non-Ballistic, Watertight & Airtight Quick Acting or Individually Dogged Personnel Doors

COAST GUARD PUBLICATIONS

Coast Guard Commandant Instruction (COMDTINST) M10360.3, Jun 2006, Coatings and Colors Manual

Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2022, General Requirements

Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2022, General Requirements

Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2022, Welding and Allied Processes

Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2022, Requirements for Preservation of Ship Structures

OTHER REFERENCES

Code of Federal Regulations (CFR) Title 29, Part 1915, Occupational Safety and Health Standards for Shipyard Employment

Commercial Item Description (CID) A-A-59316, 2016, Abrasive Materials; for Blasting

Military Specification MIL-A-22262B, March 1996, Abrasive Blasting Media Ship Hull Blast Cleaning

NAVSEA Technical Publication T9074-AD-GIB-010/1688, (TP 1688), July 2012, Requirements for Fabrication, Welding, and Inspection of Submarine Structure

The Society for Protective Coatings (SSPC) Surface Preparation Standard No. 11 (SSPC-SP 11), 2013, Power-Tool Cleaning to Bare Metal

The Society for Protective Coatings (SSPC)/NACE International (NACE) 2007, Joint Surface Preparation Standard SSPC-SP 10/NACE No. 2, Near-White Metal Blast Cleaning

1. ITEM 1: Fabrication of Watertight and Non-Watertight Doors, Hatches, and Scuttles

1. SCOPE

1.1 Intent. This work item describes the requirements for the Contractor to fabricate watertight and non-water tight doors, hatches, and scuttles identified in Table 1 in accordance with drawings and references.

Table 1 - Watertight Doors and Scuttle locations

Description

Location

P/N and Description

QTY

Drawing

Watertight Scuttle

Escape Trunk (1-19-2-T)

PN: 6

Scuttle - 21-inch Diameter CO, RSD, QA, WTRTT .

01 Each

225B WLB 167- 001

Watertight Door

ATON Shop

(1-21-2-Q)

PN: 11

Door - 26 x 66 inches, CO, WEAT, LH, W/Hasp, and staple, and 9-inch fixed light.

01 Each

225B WLB 167-001

Watertight Door

PFD Locker

(02-75-1-Q)

PN: 20

Door - 26 x 66 inches, CO, WEAT, RH, W/Hasp, and staple, without light.

01 Each

225B WLB 167-001

Watertight Door

Incinerator Room (02-85-0- Buoy

PN: 20

Door - 26 x 66 inches, CO, WEAT, RH, W/Hasp, and staple, without light.

01 Each

225B WLB 167-001

Watertight Door

Deck Control Booth (01-27-0-C) Q)

PN: 20

Door - 26 x 66 inches, CO, WEAT, RH, W/Hasp, and staple, without light.

01 Each

225B WLB 167-001

Watertight Hatch

Passage

(3-21-0-l)

PN: 24A

Hatch – 30 in x 30 in, CO, RSD, WTRTT, INDV Dogged, W/18 in Dia CO FL QA WTRTT Scuttle

01 Each

225B WLB 167-001

Watertight Hatch

BOSON STRM #1

(1-0-0-A)

PN: 17

Hatch – 30 in x 30 in, CO, RSD, WTRTT, 8 dog, W/21 in, DIA QA, WTRTT Scuttle

01 Each

225B WLB 167-001

Watertight Hatch

BOSON STRM #2

(1-6-1-A)

PN: 17

Hatch – 30 in x 30 in, CO, RSD, WTRTT, 8 dog, W/21 in, DIA QA, WTRTT Scuttle

01 Each

225B WLB 167-001

1.2 Government-furnished property

None

2. REFERENCES

Coast Guard Drawings

Coast Guard Drawing 225B WLB 167-001, Rev-R, Structural Closures

Coast Guard Drawing 225B-WLB-631-001, Rev G, 2000, Paint Schedule

NAVSEA Drawing 167-7379842, Rev A, Procedure & Welding Sequence for Non-Ballistic, Watertight & Airtight Quick Acting or Individually Dogged Personnel Doors

Coast Guard Publications

Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2022, General Requirements

Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2022, Welding and Allied Processes

Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2022, Requirements for Preservation of Ship Structures

Other References

Commercial Item Description (CID) A-A-59316, 2016, Abrasive Materials; for Blasting

Military Specification MIL-A-22262B, March 1996, Abrasive Blasting Media Ship Hull Blast Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) 2007, Joint Surface Preparation Standard SSPC-SP 10/NACE No. 2, Near-White Metal Blast Cleaning

The Society for Protective Coatings (SSPC) Surface Preparation Standard No. 11 (SSPC-SP 11), 2013, Power-Tool Cleaning to Bare Metal

3. REQUIREMENTS

3.1 General.

3.1.1 CIR.

None.

3.1.2 Tech Rep.

Not applicable.

3.1.3 Protective measures. Not Applicable

3.1.4 Interferences. Not Applicable

3.1.5 Testing. All testing to be completed in accordance with drawings and Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2022, Welding and Allied Processes

3.1.6 Shipping. Contractor shall construct container to ship doors and hatches and must include pricing for shipping to CGC MAPLE, C/O CWO Erik Bratland, Surface Forces Logistics Command, 2401 Hawkins Point Road, Baltimore, MD, 21226-1797, Building 58.

4. NOTES

Period of Performance: 09/16/2025 to 12/14/2025 (Ship to: CG Yard, 2401 Hawkins Point, Rd. Baltimore, MD 21266 ATTN: C/O CWO Erik Bratland, CGC Maple)

Attachments/Links