DESIGN, CONSTRUCT AND DELIVER FOUR (4) MONOHULL FOAM COLLAR FULL-CABIN...

Location:	California
Posted:	Nov 20, 2025
Due:	Dec 2, 2025
Agency:	The Port of Los Angeles
Type of Government:	State & Local
Category:	28 - Engines, Turbines, and Components
Solicitation No:	F-1262
Publication URL:	To access bid details, please log in.

Attachment Preview

TO: HARBOR DEPARTMENT PURCHASING OFFICE

500 Pier "A" Street

Berth 161

Wilmington, CA 90744

BID NO. F-1262 Page 1

Show this number on envelope

Purchase Order No.:________________

(internal use only)

1. COMPLETE CONTRACT

This entire Bid Request shall become the contract upon its execution by the Executive Director on behalf of the Harbor

Department of the City of Los Angeles. The complete contract shall consist of the entire Bid (including Specifications), this

page, terms and conditions, any addendums, and when required, CONTRACTOR'S BOND. Contractor will be provided with a

copy of the executed contract.

2. GOODS AND SERVICES TO BE PROVIDED BY THE CONTRACTOR

The Contractor agrees, upon acceptance of this offer by the City, to furnish the goods and services herein specified according to

the terms and conditions as set forth herein.

3. AMOUNT TO BE PAID

The City agrees to pay the Contractor for the goods or services in the manner described in the paragraph entitled "PAYMENTS"

on the reverse side of this form. Unless otherwise indicated by the Bidder, remittance by the City for goods or services will be

made to the address below.

4 CHOICE OF ALTERNATIVE PROVISIONS; OPTIONS; NOTIFICATION

When alternative provisions are requested, or options are offered, the Contractor will be notified as to which provision, or option, is

Being accepted when notification is sent that the Contractor is the successful bidder.

5. DECLARATION OF NON-COLLUSION

The undersigned certifies (or declares) under penalty of perjury that this bid is genuine and not sham or collusive, or made in

the interest or on behalf of any person, firm, or corporation not herein named; that the bidder has not directly or indirectly

induced or solicited any other bidder to put up a sham bid, or any other person, firm or corporation to refrain from bidding,

and that the bidder has not in any manner sought by collusion to secure any advantage over other bidders.

6. LEGAL JUSTIFICATION

This agreement shall be deemed entered into in Los Angeles, California, and shall be governed and construed in accordance

with the laws of the State of California.

EXECUTED AT: __________________________________________ ON THE ________DAY OF ______________________, 2025

City, State

Date

Month

Year

BIDDER MUST COMPLETE AND SIGN BELOW:

Firm Name _____________________________________________________________________________

Phone __________________________________ Email___________________________________________

Address ________________________________________________________________________________

Street

City

State

Zip

_____________________________________________________________________________________________________________

Signature

Printed Name

Printed Title

_____________________________________________________________________________________________________________

Signature

Printed Name

Printed Title

(Approved Corporate Signature Methods)

Two signatures: One by Chairman of Board of Directors, President, or a Vice-President AND one by Secretary, Assistant Secretary, Chief Financial

Officer or an Assistant Treasurer.

One signature: By corporate designated individual together with properly attested resolution of Board of Directors authorizing person to sign.

NOTARIZATION: Bids executed outside the State of California must be sworn to and notarized below.

County of_____________________

State of __________________________S.S.

Subscribed and sworn this date

____________________________, 2025

In witness whereof the Board of Harbor

Commissioners of the City of Los Angeles

has caused this contract to be executed by the

Executive Director of the Harbor

Department of said City and said Contractor

has executed this contract the day and year

written below.

Approved as to form and legality

________________________, 2025

City Attorney

By_________________________________ BY_________________________________

Executive Director Harbor Department

Deputy

___________________________________ ___________________________________

Notary Seal

Signature

Date

CITY OF LOS ANGELES

HARBOR DEPARTMENT

FORMAL REQUEST FOR BIDS

BID NO. F-1262

SUBMIT BID TO:

Los Angeles Harbor Department

Purchasing Office, 1st Floor

500 Pier Α Street

Wilmington, CA 90744

OFFICE HOURS:

7:30 a.m. – 4:30 p.m.

Monday through Friday (excluding Holidays)

BID DUE BEFORE

11:00 A.M.

TUESDAY

DECEMBER 2, 2025

Buyer: Danielle Nappi, Procurement Analyst Email: dnappi@portla.org

ALL ITEMS REQUESTED MAY BE QUOTED AS “OR EQUAL”.

AFFIRMATIVE ACTION – AN APPROVED AA PLAN OR CERTIFICATION, IF NOT ON FILE, WILL BE REQUIRED PRIOR TO AWARD OF CONTRACT.

**DESIGN, CONSTRUCT AND DELIVER FOUR (4) MONOHULL FOAM COLLAR FULL-

CABIN OUTBOARD MOTOR POWERBOAT VESSELS**

Bids are requested for the one-time purchase requirements of the Los Angeles Harbor Department

(“Department” or “City”) for four (4) “Monohull Foam Collar Full-Cabin Outboard Motor Powerboats” to

be furnished and delivered as may be required from the effective date of the purchase agreement.

PRICES TO INCLUDE ALL DELIVERY CHARGES AND FEES, EXCLUDING SALES TAX, UNLESS

OTHERWISE QUOTED.

**THIS SECTION INTENTIONALLY LEFT BLANK**

REQ. NO.: REQ17094

NOTIFY: G. Cummings

PAGE 2

11.13.2025 DMN

STATE TIME OF DELIVERY:

DAYS AFTER RECEIPT OF ORDER TERMS

DISCOUNT FOR PAYMENT WITHIN

DAYS.

BIDDER MUST SIGN THIS BID ON PAGE 1 – WET SIGNATURES REQUIRED

CITY OF LOS ANGELES

HARBOR DEPARTMENT

FORMAL REQUEST FOR BIDS

NO. F-1262

(SHOW THIS NUMBER ON ENVELOPE)

LINE ITEMS

Line

Description

SAFE 33 Full Cabin.

SAFE 33 Full Cabin Specifications:

Length Overall (LOA): 35'-4" / 10.8m

Beam Overall (BOA): 1 0' / 3.1 m

Deadrise at Transom: 25 Degrees

Draft (Engine Trimmed Up): 20 / 0.50m

Max HP: 1200

Top Speed (Knots): 58

Max Range (NM): 270 with 10% reserve

Fuel Cap (gal): 300

Light Ship Weight (lbs): 12,500

Operational Weight (lbs): 14,330

Maximum Payload (lbs): 3,800

Weight on Trailer (lbs): 17,730

Length on Trailer - Road Transport (Feet): 46'-4"

Height on Trailer - Road Transport (Feet): 11 '-6"

HULL AND DECK

-5/16" - 5086 bottom plate with SAFE Boats

exclusive stringer system with angled transverse

framing

-Pressure tested air tight hull

-Reinforced keel beaching plate

-Stepped transom with speed shoe in bottom plate

-Performance wings below collars for increased lift

and stabilization while maneuvering

-Fully welded performance lifting strakes

-Self bailing decks with high volume scupper

drains

-Forward cockpit with self draining decks

-Bow storage/anchor locker with aft facing door

-Dual aft rigging locker system with topside

access

-Transom inspection hatch

-Sacrificial hull anode(s)

SUPER STRUCTURE

-Cabin with aft, port and starboard weather tight

doors

-Cuddy with bench seating

-Weather tight cuddy access hatch

-Sliding side aft windows

-Overhead spotter windows (tinted)

-Safety glass used in all windows

-Overhead cuddy ceiling hatch

Quantity

Unit Price

Ext. Price

CITY OF LOS ANGELES

HARBOR DEPARTMENT

FORMAL REQUEST FOR BIDS

NO. F-1262

(SHOW THIS NUMBER ON ENVELOPE)

-Swing down radar pod

-Safety hand/grab rail system with black

rubberized rail wrap

CONSOLE & DASH

-Starboard side helm

-OHIP - Over Head Instrument Panel

SEATING, SEAT STORAGE & UPHOLSTERY

-Positions 1 and 2 - Bentley shock mitigating

seats with seat belts, fore/aft and height

adjustments

-Positions 3 and 4 - Bentley shock mitigating

seats with seat belts fore/aft and height

adjustments

-Port and starboard aft jump seat/storage boxes

with upholstered cushions

-Port and starboard cuddy benches with

upholstered cushions

COLLAR SYSTEM

-Patented 100% foam SAFE XDR-1 Extreme Duty

Reinforced Collar System with black rubstrake

-Available collar colors include: black, blue, gray,

orange, green, red

COATINGS, COVERINGS & LETTERING

-Black non-skid decks and gunnels

-Black rubberized dash skid

-Marine grade carpet and insulation

-Upholstered headliner

2 Reinforced Push Knees. SBI Fabricated

Reinforced Push Knees On Metal Bow with 4" D

rubber. Includes all Necessary Hardware and

Installation.

3 Upgrade to Stacked Forward Bow

Storage/Anchor Lockers with Topside Access

on SAFE 1 0' Wide. Includes: Upgrade from

Standard Forward Bow Storage Anchor Locker

with Vertical Locker Door to Stacked Forward Bow

Storage/Anchor Lockers with Topside Access,

Necessary Hardware and Installation.

4 Fritted Window Package on SAFE Large FC.

Includes: (1) Fritted Window Package, Necessary

Hardware and Installation.

5 Add Custom SBI Fabricated Aft Cabin

Workstation w/ (1) Chart Light & (1) 110VAC

Outlet on SAFE FC. Includes: Modifications to

Seat Box to Accommodate (1) aft Cabin

CITY OF LOS ANGELES

HARBOR DEPARTMENT

FORMAL REQUEST FOR BIDS

NO. F-1262

(SHOW THIS NUMBER ON ENVELOPE)

Workstation, (1) LED Chart Light, (1) 110VAC

Outlet, Necessary Hardware and Installation.

6 Allsalt Adjustable Footrest w/ 20" Tread, 6"

Height Adjustment, 0 Deg Incline Mounted.

Includes: ( 1) Allsalt Footrests with 20" Tread, 6"

Height Adjustment and O Deg Incline Mounted,

Necessary Hardware and Installation.

7 Black Rub-Strake

8 Collar Color Black

9 SAFE 1 Oft Beam Boats Personnel Recovery

Cutout. Personnel recovery collar cutouts.

Facilitates PIW recovery.

Includes removable port and starboard inserts for

use underway.

10 Black Rubberized Rail Wrap

11 Black Rubberized Dash Skid

12 Anti-Fouling Bottom Paint, Black, on SAFE 33

FC. Includes: Surface Preparation to

Manufacturers Specifications and Black Sherwin

Williams SeaVoyage (SeaGuard), Heavy Metal

Free (HMF), Anti-fouling, Ablative Paint on All

Wetted Surfaces Below Collar.

13 Gray Paint-On Non-Skid Deck Coating on

SAFE 33FC. Includes: Preparation of All Exterior

Walking Surfaces and the Application of Paint-On

Non-Skid Coating. Non-Skid Coating will Cover

Horizontal Surfaces up to the Welds on Vertical

Surfaces. Note: (No Patterns, Reveals or Radius

Corners)

14 Tow Spool w/ 300' Line, Hand Brake & Cover.

Tow Line Storage Spool w/ Hand Brake Mounted

on Aft Side of Radar Pod. Tow Spool will store

300' of 3/4 DBN Tow Line. Includes Tow Spool

Cover, 300' of Line, Necessary Hardware and

Installation.

15 110VAC Shore Power Kit w/ Generator - 5

Battery System W/Chargers

11 0vac Shore Power Kit w/ Generator (for Triple

Engines w/ Single House Battery). Kit Includes:

120vac 30amp Shore Inlet, Dual Source A/C

Panel w/ Analog Volt Meter, GFCI Outlet w/

Cover, Isolation Transformer, 25' Shore Power

Cord, and Two (2) Three (3) Bank Chargers,

Condition, Maintain and Re-condition. Automatic

Dockside Power Supply Mode for 12 Volt DC

This is the opportunity summary page. It provides an overview of this opportunity and a preview of the attached documentation.

Bid #:	F-1262
Due Date (Before 2 p.m.):	12/2/2025
Buyer:	Danielle Nappi
Description:	DESIGN, CONSTRUCT AND DELIVER FOUR (4) MONOHULL FOAM COLLAR FULL-CABIN OUTBOARD MOTOR POWERBOAT VESSELS Attachment A Attachment B Attachment C Attachment D Attachment E Attachment F Addendum No. 1 Addendum No. 1 Page 9_rev1

DESIGN, CONSTRUCT AND DELIVER FOUR (4) MONOHULL FOAM COLLAR FULL-CABIN OUTBOARD MOTOR POWERBOAT VESSELS Attachment A Attachment B Attachment C Attachment D Attachment E Attachment F Addendum No. 1 Addendum No. 1 Page 9_rev1

Attachment Preview

See also