BEARING HEAVY, 4.33

Active

Contract Opportunity

1. This is a combined synopsis/solicitation for commercial items, prepared in accordance with the format in subpart 12.6 of the FAR Part 12 - Acquisition of Commercial Products and Commercial Services | Acquisition.GOV and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a separate written solicitation will not be issued.


2. Request for Quote number in header applies and is used as the solicitation number. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-87, effective, 7 March 2016.


3. It is anticipated that a competitive price purchase order shall be awarded because of this synopsis/solicitation. All responsible sources may submit a quotation, (vendor must have an active registration in SAM.Gov prior to award) which if timely received, shall be considered by this agency.


4. Payments are NET 30 and will be made in accordance with the FAR 52.232-25 Prompt payment clause 52.232-25 Prompt Payment. | Acquisition.GOV.


5. All acquisitions expected to exceed $10k can also be found on SAM.GOV under the same solicitation/RFQ listed in the header.


6. The U.S. Coast Guard, Surface Forces Logistics Center (SFLC) intends to award a Firm Fixed Price Purchase Order.


7. The United States Coast Guard Surface Forces Logistics Center has a requirement for the following items:

Vendor shall provide:

VENDOR NAME:

VENDOR UEI:

ALL ITEMS LISTED IN THE BELOW PARTS LIST AND NO SUBSTITUTIONS WILL BE AUTHORIZED WITHOUT APPROVAL FROM USCG SFLC TECHNICAL EXPERTS.

NSN 3110-01-F11-2241

PART # 23222CC/W33

NOMENCLATURE: BEARING HEAVY, 4.33

QTY 24

U/I: EA

PRICE:

TOTAL:

If unable to meet required delivery date provide DD: ______

PRESERVATION, PACKAGING & MARKING SHALL BE IN ACCORDANCE WITH SPECIFICATIONS OUTLINED IN PREPARATION FOR DELIVERY BELOW:

BORE DIAMETER: 110 MM

OUTSIDE DIAMETER: 200 MM

OVERALL WIDTH: 2-3/4 IN

BORE TYPE: ROUND

OUTER RING TYPE: NOT SPLIT

LUBRICATION HOLE TYPE: LUBRICATION GROOVE & HOLES

INTERNAL CLEARANCE: C0

CLOSURE TYPE: OPEN

OPERATING TEMPERATURE RANGE: MAXIMUM OF +390 ?F

DYNAMIC LOAD CAPACITY: 600 KN

STATIC LOAD CAPACITY: 765 KN

MAXIMUM RPM: 3200 RPM

CAGE MATERIAL: STEEL

BEARING MATERIAL: STEEL

CAGE TYPE: INNER RING GUIDED

PRECISION RATING: NOT RATED

FINISH/COATING: UNCOATED

OUTER RING WIDTH: 69.8 MM

FILLET RADIUS: 2 MM

SERIES: 232

PACKAGE INDIVIDUALLY IAW MIL-DTL-197M PACKAGING OF BEARINGS AND ASSOCIATED

MATERIALS:

METHOD 33B, LEVEL B UTILIZING MIL-PRF-16173 CLASS II, GRADE 2 PRESERVATIVE WRAPPED

IN PPP-B-1055 BARRIER MATERIAL, IN A MIL-DTL-117 TYPE 3, CLASS B, STYLE 1 HEAT

SEALABLE BAG AND AN ASTM-5118 FIBERBOARD BOX WITH APPROPRIATE CUSHIONING AND

DUNNAGE.

EACH PACKAGE IS TO BE MARKED IAW MIL-STD-129R AND BAR CODED IAW ISO/IEC-16388-2007,

CODE 39 SYMBOLOGY.

PACKAGE LABEL:

ITEM NAME:

PART NUMBER:

NSN:

QNTY: (EXAMPLE 1 EA)

COND-A

CONTRACT NUMBER / ORDER NUMBER

FOR TECHNICAL INQUIRIES:

POC: BRADY MYERS

EQUIPMENT SPECIALIST

E-MAIL: BRADY.A.MYERS@USCG.MIL

PH: 571-613-3388

- NO SUBSTITUTIONS.

☐Quality Assurance Q/A Inspection, if this block is checked, the contractor shall be responsible for notifying the Contracting Officer at least seven (07) calendar days prior to the contractor being ready for Q/A inspections or testing as required.

Are you able to meet packaging requirements? Yes, ___ No ____

** Total cost shall have delivery and any Freight charges to zip code 21226 included. **

** SHIPPING: FOB DESTINATION REQUIRED. **

SHIP TO:

USCG SURFACE FORCES LOGISTICS CENTER

2401 HAWKINS POINT ROAD

RECEIVING ROOM- BUILDING 88

BALTIMORE, MD 21226

Preparation For Delivery

All material must be shipped to U.S. Coast Guard Surface Forces Logistics Center, 2401 Hawkins Point Road, Receiving Room- BLDG 88, Baltimore, MD, 21226 for this Purchase Order. Material must be accompanied by an itemized packaging list securely attached to the outside of the shipment.

All packing lists shall cite the Purchase Order Number with the packaging in such a manner to ensure identification of the material provided.

Material shall be packed for shipment using Military Packaging, for example in packaging please reference MIL-STD-2073-1E. Material must be packaged in such a manner as to afford adequate protection to the item against corrosion, deterioration, and physical damage during shipment from the supply course to Surface Forces Logistics Center locations.

Packaging shall provide adequate protection for warehouse storage and shipments from the warehouse.

All material shall be marked in accordance with MIL-STD-129R and barcoded unless otherwise authorized by the Contracting Officer. All material will have the Purchase Order Number, National Stock Number (if applicable), Vendor name and Part Number clearly marked on the exterior of all material shipped.

All Deliveries are to be made Monday through Friday between the hours of 8am to 3pm.

Please make sure that any changes in Delivery Timeframes or tracking information get sent to

U.S. COAST GUARD APPROVED LABEL SHOULD HAVE THE FOLLOWING

• NATIONAL STOCK NUMBER (NSN)


• ITEM NAME


• PART NUMBER


• PURCHASE ORDER NUMBER


• THE WORDS “COAST GUARD SFLC MATERIAL” CONDITION (A)


• QUANTITY AND UNIT OF ISSUE (I.E) (1-EA)

Invoicing In IPP

It is now a requirement that all invoicing for Purchase Orders will now be entered and processed through https://www.ipp.gov.

All invoices must contain the following information: CG contract number, vendor’s invoice number, vendor’s UEI, UEI & TINs number, cage number, PO item number, description of supplies or services, unit prices and extended totals (INVOICES FOR PURCHASE ORDERS AWARDED BY SURFACE FORCE LOGISTICS CENTER, BALTIMORE ARE TO BE SUMITTED AS NON-PO IN IPP). Shipping costs will be indicated as a separate line item on the invoice (if applicable). Shipping cost $100 or more must be accompanied by a separate freight invoice when submitting an invoice(s) for payment (if applicable).

To submit an invoice, vendor must have access to www.ipp.gov. Additionally, a copy of the invoice must also be sent to the PO Issuing Office at: JERMAINE.T.PERKINS@uscg.mil

Attachments/Links