1 NSN LTC

Active

Contract Opportunity

***Sources Sought***

This is not a request for either a quote or proposal. This announcement is considered market research in accordance with FAR Part 10.

****************** NO SOLICITATION IS BEING ISSUED AT THIS TIME ****************

The purpose of this synopsis is to identify qualified vendors capable of manufacturing items in accordance with the requirements listed below. Please review the below NSNs and provide us with any additional sources that are able to manufacture these items. Please provide the company name, city and state OR country if applicable, and POCs with telephone, fax and/or email information. All of this information can be submitted to Scott Knowles at Scott.Knowles@dla.mil. Phone 614 692-0639. We thank you in advance for your assistance.

NSN NAME

1240-01-390-4980 PERISCOPE, ARMORED VEHICLE

---------------------------------------------------------------

Responses to this Request for Information (RFI) are not considered offers and cannot be accepted by the Government to form a binding contract. This RFI is for market research purposes only. Any information submitted is at the company's own expense. The Government will not reimburse respondents for any costs associated with submission of capability statements in connection with the market survey. Any information provided is voluntary.

ITEM DESCRIPTION

NSN: 1240-01-390-4980

PERISCOPE, ARMORED VEHICLE

ZD003: A metal casting process was identified as a means to manufacture this

item. Tooling is required to produce a casting. For sourcing, tooling,

materials or other information, please contact the appropriate

assistance team: (Aviation, C&E Supply Chains)

https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/;

(Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil.

RQ032: EXPORT CONTROL OF TECHNICAL DATA

This item has technical data some or all of which is subject to

export-control of either the International Traffic in Arms regulations

(ITAR) or the Export Administration Regulations (EAR), and cannot be

exported without prior authorization from either the Department of State

or the Department of Commerce. Export includes disclosure of technical

data to foreign persons and nationals whether located in the United

States or abroad. This requirement applies equally to foreign national

employees and U.S. companies and their foreign subsidiaries. DFARS

252.225-7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export-control

technical data to DLA contractors that have an approved US/Canada Joint

Certification Program (JCP) certification, have completed the

Introduction to Proper Handling of DOD Export-Controlled Technical Data

Training and the DLA Export-Controlled Technical Data Questionnaire

(both are available at the web address given below), and have been

approved by the DLA controlling authority to access the

export-controlled data. Instructions for obtaining access to the

export-controlled data can be found at:

https://www.dla.mil/Logistics-Operations/Enhanced-Validation/

To be eligible for award, offerors and any sources of supply proposed

for use are required to have an approved JCP certification and have

been approved by the DLA controlling authority to access

export-controlled data managed by DLA. DLA will not delay award in

order for an offeror or its supplier to apply for and receive approval

by the DLA controlling authority to access the export-controlled data.

RD002: COVERED DEFENSE INFORMATION APPLIES

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS

ZL006: This item contains a phosphate coating requirement

IAW MIL-STD-171, MIL-DTL-16232, and TT-C-490 Types I, II, and V. In

lieu of the required submittal of a preproduction phosphate

procedure the following is now required: The

contractor responsible for the actual coating

procedure must be certified by the Performance

Review Institute (PRI) to the NADCAP standard for

the phosphate chemical processes. Verification of

this certification is required and must be

supplied upon request of the Contracting Officer.

ZD081: This material has specialty metal requirements. DFARS 252.225-7008,

DFARS 252.225-7009, and DFARS 252.225-7010 apply to this award if over

the Simplified Acquisition Threshold.

RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS

(MANUFACTURERS AND NON-MANUFACTURERS)

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

IAW BASIC DRAWING NR 19200 12548774

REVISION NR M DTD 05/17/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12387279

REVISION NR B DTD 07/28/2023

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 7680606

REVISION NR AB DTD 04/19/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12579607

REVISION NR C DTD 08/04/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12297953

REVISION NR C DTD 11/24/2021

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12548768

REVISION NR A DTD 08/30/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12344344

REVISION NR N DTD 12/13/2022

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12344343

REVISION NR R DTD 08/01/2023

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 ATPD-2167

REVISION NR A DTD 09/06/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12285860

REVISION NR E DTD 08/07/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12285860

REVISION NR M DTD 12/13/2018

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 7641866

REVISION NR V DTD 04/19/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12285860

REVISION NR G DTD 05/15/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12344343-L15T3010

REVISION NR J DTD 06/23/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12548779

REVISION NR J DTD 01/20/2021

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12285860

REVISION NR K DTD 07/18/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12548772

REVISION NR G DTD 10/20/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12548773

REVISION NR B DTD 09/19/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12549807

REVISION NR A DTD 03/28/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12549146

REVISION NR A DTD 03/27/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12918300

REVISION NR A DTD 06/28/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12548771

REVISION NR H DTD 10/20/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12549136

REVISION NR G DTD 03/27/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12548769

REVISION NR E DTD 08/26/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12548770

REVISION NR A DTD 09/06/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12548774

REVISION NR DTD 02/22/2024

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12473000

REVISION NR B DTD 06/26/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12548767

REVISION NR A DTD 07/14/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12548774

REVISION NR B DTD 02/27/2024

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12549747

REVISION NR B DTD 08/30/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12931825

REVISION NR C DTD 10/21/2016

PART PIECE NUMBER:

IAW REFERENCE QAP 19200 12548771

REVISION NR J DTD 10/28/2015

PART PIECE NUMBER:

IAW REFERENCE QAP 19200 12548772

REVISION NR F DTD 10/28/2015

PART PIECE NUMBER:

IAW REFERENCE QAP 19200 12548773

REVISION NR B DTD 10/28/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 01417 SC-X17343

REVISION NR D DTD 12/09/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12548769

REVISION NR D DTD 03/31/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12285860

REVISION NR D DTD 04/18/2002

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR NCAGE MIL-DTL-53039

REVISION NR F DTD 09/06/2022

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81349 MIL-DTL-64159

REVISION NR C DTD 03/24/2022

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12548774

REVISION NR M DTD 09/15/2023

PART PIECE NUMBER:

PREP FOR DELIVERY

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:A

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PRESERVATION, PACKAGING, AND PACKING SHALL BE IN

ACCORDANCE WITH SPECIAL PACKAGING INSTRUCTION

(SPI) AK12548774, REVISION B, DATED

Attachments/Links