| Location: | Hawaii |
|---|---|
| Posted: | Dec 31, 2025 |
| Due: | Jan 21, 2026 |
| Agency: | General Contractors Association |
| Type of Government: | State & Local |
| Category: |
|
| Publication URL: | To access bid details, please log in. |
Project Description:
General Description
The Molokai Education Center Farm seeks to procure a compact utility tractor and
associated implements suitable for small-scale agricultural field preparation, soil
cultivation, and material handling in farm and garden settings. The equipment shall
be capable of ground-engaging work, final planting bed preparation, and routine farm
support tasks. The front-end loader and rotary tiller provided shall be compatible
with the tractor offered and appropriate for the intended agricultural use under
typical farm conditions.
All equipment shall be new, commercially manufactured, and compliant with applicable
safety and regulatory standards.
Equipment shall be delivered fully assembled, operational, and ready for use upon
delivery to Molokai.
Detailed Specifications
1) Compact utility tractor :
a) Minimum 24 gross horsepower (hp) diesel engine.
2) Safety Features:
a) Roll-over, protective structure (ROPS) with operator seat belt.
3) Transmission:
a) Mechanical gear transmission (manual), clutch-operated, non-hydrostatic;
number of forward and reverse speeds may vary by manufacturer.
4) Front-end loader:
a) Quick-detachable front-end loader equipped with a 4-in-1 multipurpose bucket.
5) Rear three-point hitch:
a) Category I, suitable for standard farm implements
6) Rotary tiller:
a) Working width must exceed the tractor’s rear tire outside-to-outside width,
suitable for final planting bed preparation.
7) Tires:
a) R-1 agricultural tread tires .
8) Delivery of fully assembled tractor with equipment to Molokai Education Center
Farm, including all:
a) freight;
b) inter-island transport;
c) setup;
d) final assembly.
9) Safety & Warranty
a) Tractor shall comply with OSHA ROPS and seat-belt requirements.
b) Minimum warranty coverage: two (2) years on powertrain and major components.
c) Operator’s manual and maintenance guide shall be provided.
10) Service Requirement - 2 Year Maintenance Package
a) Two-year service as specified in the manufacturer’s operating manual or other
manufacturer literature. Inclusive of ALL expenditures to provide this
service.
b) Factory-authorized technician(s) must be available for service and respond
within 72 hours of a service call at the UH Molokai Education Center Farm.
11) Upon Request Vendor will supply:
Exact Specifications of Tractor, Front-End
Loader, and Rotary Tiller Submitted
a) Tractor Make: ____________________
b) Tractor Model: ____________________
c) Gross HP (published): ____________________
d) Hydraulic Flow (GPM): ____________________
e) Three-Point Hitch Category: ____________________
f) Overall dimensions of tractor with R1 tires: _______________________
g) Front End Loader:
i) Make: __________________
ii) Model: _________________
iii) 4 in 1 multipurpose: _____(yes/no)
h) Rotary Tiller:
i) Make: __________________
ii) Model: _________________
iii) Working width: ______
i) Tractor, Front-End Loader, & Rotary Tiller Documentation Attached:
_____ (Yes / No)
j) Vendor shall identify any future “expenditures” (type such as, but not
limited to, airfare, room & board, and rental vehicle, NOT dollar value)
for warranty service and repairs request by UHMC Molokai Ed Center
to be performed at the UH Molokai Education Center Farm.
| Download |
|
Plans
Specifications
|
Addendums/Amendments
|

With GovernmentContracts, you can: