Re-Bid Pump Station 182 Redundant Power

Project Description: The work associated with the construction of the Pump Station 182 Redundant Power Project includes the carrying out of all duties and obligations and the furnishing of all labor, material, tools, equipment, and other incidentals necessary or convenient to the successful completion of the project.
This project generally consists of the construction of a redundant underground power supply from the Utility’s (City of Tallahassee Electric Department) distribution system to Pump Station 182. Portions of the work will be performed by COT Electric, and portions of the work shall be performed by the Contractor. The Scope of Supply/Division of Responsibility is defined by a document attached to the Electrical Specifications (Appendix D).
Pump Station 182 Scope of Work
The Contractor’s scope of work at Pump Station 182 includes supply and installation of two 4-inch electrical conduits via horizontal directional drilling from an existing termination cabinet on Engineering Way to an existing termination cabinet at the Pump Station 182 site. Additional termination cabinets (supplied by COT Electric) are to be installed by the Contractor along the conduit route. The Contractor’s scope also includes coordination with the Electric Utility (City of Tallahassee Electric Department) for the installation of a pad mounted transformer and installation of the primary conductors. The transformer pad and the primary conduits on the Pump Station 182 site shall have been installed by Others.
The Contractor’s scope of work shall also include the supply and installation of the Main Breaker (2000 amps) and the Automatic Transfer switch (ATS – Redundant Power or Main-to-Main) as coordinated with the overall PS #182 Project. The installation shall include conduit and cable from the secondary of one transformer to the new Main Breaker and from the new Main Breaker to
the new ATS (one side of the Main-to-Main ATS – aka Service -to- Service ATS). The work shall also include rework of the existing Main Breaker’s outgoing feeder to the new Main-to-Main ATS and the installation of the conduit and cable for the “Load” connection of the new ATS to the Normal Power connection of the existing ATS (Utility-to- Generator ATS – the generator connection will have been made by Others).
The Contractor’s scope of work includes electrical work that will take place on the PS #182 site, and this work shall be coordinated with the Overhead (O/H) and Underground (U/G) Distribution work performed by the Contractor, the Utility, and Others. The O/H Distribution work shall include the connection/riser to O/H power lines and a connection to a pad mounted transformer. The U/G distribution work shall include the 15KV circuit routed to the PS #182 Site and connected to a pad mounted transformer (see Scope of Supply/Division of Responsibility document).
MANDATORY PRE-BID MEETING MARCH 2, 2026@ 2:00PM
Microsoft Teams meeting
Join: https://teams.microsoft.com/meet/24281848567952?p=bxpbE6QPgKB3TY0Hjv
Meeting ID: 242 818 485 679 52
Passcode: GK2kz6fh
Need help? | System reference
Dial in by phone
+1 850-792-4991,,415546231# United States, Tallahassee
Find a local number
Phone conference ID: 415 546 231#
Join on a video conferencing device
Tenant key: talgov@m.webex.com
Video ID: 117 283 030 3
More info
For organizers: Meeting options | Reset dial-in PIN