| Location: | Missouri |
|---|---|
| Posted: | Jul 14, 2026 |
| Due: | Jul 21, 2026 |
| Agency: | Drexel Technologies |
| Type of Government: | State & Local |
| Category: |
|
| Publication URL: | To access bid details, please log in. |
| Bid Date | 7/21/26 10:00am |
Sunset Hills, MO
Date Issued: 7/14/2026
City of Sunset Hills, Missouri
Kennerly Road Guardrail Replacement
Location: Intersection of Kennerly Road and Hausfel Lane
Nearest Address: 10239 Kennerly Road, Sunset Hills, MO 63127
NOTICE TO BIDDERS
The City of Sunset Hills, Missouri, will receive bids for the Kennerly Road Guardrail Replacement Project until July 21st 2026 at 10:00 a.m. Bids may be emailed to Jason Miller Project Manage at Jmiller@sunset-hills.com cc: Jerry Eime Street Dept. Superintendent jeime@sunset-hills.com
City of Sunset Hills
3939 S. Lindbergh Boulevard
Sunset Hills, MO 63127
The City reserves the right to reject any or all bids, waive informalities, and accept the bid deemed to be in the best interest of the City.
PROJECT DESCRIPTION
The work consists of furnishing all labor, materials, equipment, traffic control, and incidentals necessary to remove and replace approximately 110 linear feet of damaged galvanized steel guardrail at the intersection of Kennerly Road and Hausfel Lane.
All work shall comply with the current MoDOT Standard Specifications for Highway Construction, AASHTO Roadside Design Guide, MASH crashworthy requirements, and the latest edition of the MUTCD.
SCOPE OF WORK
The contractor shall provide all labor, equipment, materials, and supervision necessary to complete the project including, but not limited to:
• Remove and legally dispose of approximately 110 linear feet of existing damaged guardrail.
• Remove and dispose of damaged steel posts, blockouts, hardware, and terminal components as required.
• Furnish and install approximately 110 linear feet of new galvanized guardrail.
• Furnish and install new galvanized steel posts or approved equivalent in accordance with MoDOT standards.
• Install new composite blockouts as required.
• Install all new galvanized bolts, washers, splice bolts, nuts, and hardware.
• Install a MASH-approved guardrail end terminal if replacement is required.
• Reset or replace terminal anchorage as necessary.
• Adjust guardrail height and alignment to current standards.
• Restore disturbed areas.
• Remove all debris from the project site.
• Provide all traffic control in accordance with the MUTCD.

With GovernmentContracts, you can: