Annual Contract for Mechanical Joint Ductile Iron Pipe and Fittings

Mobile Area Water and
Sewer System
4725 Moffett Road
Mobile, AL 36618-2236
Joyce Sawyer, Buyer II PO Box 180249
Mobile, AL 36618-0249
(251) 694-3110 Office
jasawyer@mawss.com
INVITATION FOR BID
JUNE 18, 2026
INVITATION FOR BID NUMBER IFB 26-036
NAME OF BID Annual Contract for Mechanical Joint Ductile Iron Pipe and Fittings
MAWSS Purchasing Dept. Bid Box If sending bids by UPS/Fed Ex, deliver to the Warehouse:
East Visitor Entrance 1610 Shelton Beach Rd. Ext., Mobile, AL 36618
BIDS WILL BE RECEIVED AT
4725 Moffett Road with IFB# marked on envelope
Mobile, AL 36618
BID OPENING DATE July 9, 2026
BID CLOSING TIME 10:30 am Central Time
AWARD WILL BE MADE BY Total Cost & Lead Time
CONTRACT PERIOD 8/1/26 through 7/31/27 with two 1-year extension options
MAWSS Warehouse
MATERIAL DELIVERED TO 1610 Shelton Beach Road Ext.
Mobile, AL 36618
ADDITIONAL INFORMATION CONTACT Mike Grimes (251) 402-0042 or mgrimes@mawss.com
APPLICABLE SDP POLICY None
Sealed bids must be in the Purchasing Department no later than the time specified in order to be considered. Submissions
received after the deadline will not be considered. Envelopes must bear the name of the supplier, company address and the
words "IFB 26-036 MJ DI Pipe & Fittings" or "IFB 26-036 NO QUOTE." Facsimile or email bids will not be accepted.
All bids must be submitted on the attached forms or your bid will be disqualified. Bidder shall furnish all the information
required by the solicitation. The bidder's name must be typed or printed on the bid sheet and signed by the bidder or
appropriate authorized executive officer of the bidder's company. Bidders must initial any changes or erasures. Bidders should
retain a copy of bids for their records.
Bidders shall acknowledge receipt of all addenda to this solicitation by signing and returning each addendum or by identifying
the addendum number and the date on the bid form. Failure to acknowledge receipt of any addendum by a bidder will result
in rejection of the bid if MAWSS determines that the addendum contains information that materially changes the requirements.
All bids shall be quoted FOB Destination, freight prepaid with no additional charges. Unless otherwise specified in the bid, all
prices will be on a firm-fixed price basis and are not subject to adjustments based on costs incurred. MAWSS reserves the right
to reject any or all bids submitted, to waive any informality in any bid or in the bid process, or to terminate the bid process at
any time, if deemed by MAWSS to be in MAWSS's best interest.
A Purchase Order and this "Invitation for Bid" with "Specifications," "Conditions," "Bid Form," signed by the successful bidder's
authorized representative, and all attached drawings and other documents furnished by MAWSS to the bidders with the
Invitation for Bid in order to illustrate the contract requirements, will constitute a contract for the goods and/or services to be
purchased.
IFB 26-036 MJ DI Pipe and Fittings Page 1 of 8

IFB 26-036 MJ DI PIPE AND FITTINGS
CONDITIONS
The Board of Water and Sewer Commissioners of the City of Mobile will accept bids for MJ DI Pipe and Fittings in our Purchasing
Department Bid Box located at the East Visitor Entrance at 4725 Moffett Road, Mobile, AL. 36618 no later than 10:30 a.m. local
time on July 9, 2026. Bids will be opened immediately after bid closing time in the Operations Center Board room located at
the East Visitor Entrance. Award will be by Total Cost & Lead Time. The bidder offers and agrees, if this bid is accepted, to
furnish the items as defined in the specifications for the unit price set opposite each item. Pricing shall be FOB Mobile, Alabama.
All items shall be delivered to our Warehouse located at 1610 Shelton Beach Rd Ext., Mobile, AL 36618 or to the job site as
needed. The bidder shall state the expected length of delivery time on the Bid Form.
Bidder understands and agrees that manufacturer and part numbers are provided for descriptive purposes only. Items of equal
or better quality will be considered but must be approved by MAWSS in writing. Upon delivery, if the quality, durability or
performance of any product represented as equal or better is determined by MAWSS to be unsatisfactory, MAWSS will require
a suitable substitute or will require that the originally specified item be delivered, at the unit price originally offered by bidder.
No substitution for items to be provided pursuant to this contract shall be permitted during the contract period without the
express written consent of MAWSS. All items provided shall be for commercial use and for the purposes reflected in the
contract documents.
No bid on closed out or discontinued item(s) will be accepted. Item(s) that have a determinable shelf life must be disclosed at
the time of bid submittal.
Bidder understands that his/her bid shall be good and may not be withdrawn for a period of sixty (60) calendar days after the
scheduled closing time for receiving bids.
MAWSS reserves the right to reject any or all bids submitted, to waive any informality in any bid or in the bid process, or to
terminate the bid process at any time, if deemed by MAWSS to be in MAWSS's best interest.
Bidder understands and agrees that quantities will be purchased by MAWSS on an "as needed" basis to replenish inventory.
MAWSS shall not be committed to the purchase of a pre-established minimum quantity for any one item.
A bidder may not modify its bid after bid opening. Errors in the extension of unit prices stated in a bid or in multiplication,
division, addition or subtraction in a bid may be corrected by the MAWSS Purchasing Buyer prior to award. In such cases, unit
prices shall not be changed.
It is the responsibility of the bidder to determine prior to the bid opening whether any amendment, additions, deletions or
changes of any type have been made to this Invitation for Bid, Conditions, Specifications, Bid Form or any other bid documents.
Bid documents and any amendments made to this bid will be posted on our website at www.mawss.com.
Invoicing Requirements: Invoices need to be emailed to Accounts Payable at AcctsPayable@mawss.com. Please include
purchase order numbers on all invoices.
END OF CONDITIONS
IFB 26-036 MJ DI Pipe and Fittings Page 2 of 8

IFB 26-036 MJ DI PIPE AND FITTINGS
SPECIFICATIONS
Category "A" and "B" Specifications for Ductile Iron Pipe (Water)
The Ductile Iron pipe shall meet requirements of current AWWA Specifications C151 with Mechanical Joint
or Push-on Joint type pipe. Working pressure shall be a minimum of 150 psi. Design thickness and
pressure classes are listed below:
* Diameter 3" Class 52
* Diameter 4" - 12" Class 350
* Diameter 14" - 24" Class 250
* Diameter 30" - 60" Class 150
The interior of all pipe shall be cement mortar lined as specified in AWWA Specification C104, and the
exterior shall receive an approved bituminous coating. All gaskets, bolts and lubricants shall be furnished.
Ductile Iron pipe shall be centrifugally cast with minimum wall thickness in accordance with current AWWA
Specifications C151, Table 51.1.
The pressure rating, metal thickness, net weight of pipe without lining, length of pipe, name of the
manufacturer and letters "DI" shall be clearly marked on each length of pipe.
Pipe will be ordered in truckload quantities when possible. Circumstances could arise requiring less than
truckload quantities.
Circumstances may also arise when we would need 100ft of 6" MJ Pipe and 8" MJ Pipe in a 24 hour
delivery time.
Category "C" Specifications for Ductile Iron Mechanical Joint Fittings (Water)
Fittings shall be Mechanical Joint, Ductile Iron Compact Fitting Class 350 type, meeting current AWWA
C153 Specifications and shall be cement lined.
Fittings shall be cement mortar lined in accordance with current AWWA Specifications C104.
The exterior for shall receive a zinc coating applied to a mass of 200 g/m2 of pipe surface conforming to
ISO 8179 along with an approved bituminous top coating.
Fittings shall meet or exceed all applicable terms and provisions of current AWWA and ANSI
Specifications.
Fittings shall be from one of the following companies only: US Pipe, Tyler Union, Sigma Corporation, or
SIP Industries.
Fittings are to include gaskets and bolts only. NO GLANDS
IFB 26-036 MJ DI Pipe and Fittings Page 3 of 8

IFB 26-036 MJ DI PIPE AND FITTINGS
SPECIFICATIONS (cont'd)
Category "D" and "E" Specifications for Ductile Iron Pipe (Sewer)
The Ductile Iron pipe shall meet requirements of current AWWA Specifications C151 with Mechanical Joint
or Push-on Joint type pipe. Working pressure shall be a minimum of 150 psi. Design thickness and
pressure classes are listed below:
* Diameter 3" Class 52
* Diameter 4" - 12" Class 350
The interior of all pipe shall be ceramic epoxy lined with either Permox-CTF (tinted green) or Tnemec 431
Perma-Shield PL(tinted green), and the exterior shall receive an approved bituminous coating. All gaskets,
bolts and lubricants shall be furnished.
Ductile Iron pipe shall be centrifugally cast with minimum wall thickness in accordance with current AWWA
Specifications C151, Table 51.1.
The pressure rating, metal thickness, net weight of pipe without lining, length of pipe, name of the
manufacturer and letters "DI" shall be clearly marked on each length of pipe.
Pipe will be ordered in truckload quantities when possible. Circumstances could arise requiring less than
truckload quantities.
Circumstances may also arise when we would need 100ft of 6" MJ Pipe and 8" MJ Pipe in a 24 hour
delivery time.
IFB 26-036 MJ DI Pipe and Fittings Page 4 of 8

IFB 26-036 MJ DI PIPE AND FITTINGS
SPECIFICATIONS (cont'd)
LIST OF ACCEPTABLE DUCTILE IRON PIPE AND FITTINGS
ITEM MANUFACTURER PRODUCT
Pipe and Fittings (Ductile Iron)
Unrestrained Push-on and American Fastite(R) & Mechanical Jt.
Mechanical Joint Pipe
McWane Tyton(R) & Mechanical Jt.
U.S. Pipe Tyton(R) & Mechanical Jt.
Restrained Push-on Pipe American Fast-Grip(R)
*Flex-Ring(R)
McWane Sure Stop 350(R)
*TR Flex(R)
U.S. Pipe Field Lok 350(R)
*For use in Directional Drilling Pipe
Restrained Locked Mechanical American MJ Coupled Joint
Joint Pipe
McWane MJ Lock Joint
U.S. Pipe Mech-Lok(TM)
Bolt-Lok(TM)
Fittings & Restraints
Ductile Iron Fittings Sigma M.J. Ductile Iron
SIP Industries M.J. Ductile Iron
Tyler Union M.J. Ductile Iron
U.S. Pipe M.J. Ductile Iron
END OF SPECIFICATIONS
IFB 26-036 MJ DI Pipe and Fittings Page 5 of 8

IFB 26-036 MJ DI PIPE AND FITTINGS
BID SHEET
SECTION 1 - WATER PIPE
Item 12 mth Price per
Lawson # Description Category Diameter Class
# usage Foot
1 1 1200600 60 Mechanical Joint Ductile Iron Pipe A - Water 4" 350 $
2 1 1200610 80 Mechanical Joint Ductile Iron Pipe A - Water 6" 350 $
3 1 1200620 120 Mechanical Joint Ductile Iron Pipe A - Water 8" 350 $
4 1 1200640 20 Mechanical Joint Ductile Iron Pipe A - Water 12" 350 $
5 1 1200465 58 Ductile Iron Push-On Pipe B - Water 3" 52 $
6 1 1200470 80 Ductile Iron Push-On Pipe B - Water 4" 350 $
7 1 1200480 386 Ductile Iron Push-On Pipe B - Water 6" 350 $
8 1 1200490 220 Ductile Iron Push-On Pipe B - Water 8" 350 $
9 1 1200500 20 Ductile Iron Push-On Pipe B - Water 10" 350 $
10 1 1200510 20 Ductile Iron Push-On Pipe B - Water 12" 350 $
Ductile Iron Flex Pipe (T-R Flex Pipe
11 1 1200605 100 B - Water 6" 350 $
or American Flex Ring Pipe)
Section 1 - Lines 1-11 TOTAL $
Section 1 Pipe Manufacturer Delivery Time ARO
SECTION 2 - SEWER PIPE BID SHEET
Item 12 mth Price per
Lawson # Description Category Diameter Class
# usage Foot
12 1 1200602 40 Mechanical Joint Ductile Iron Pipe D - Sewer 4" 350 $
13 1 1200615 1 Mechanical Joint Ductile Iron Pipe D - Sewer 6" 350 $
14 1 1200625 11 Mechanical Joint Ductile Iron Pipe D - Sewer 8" 350 $
15 1 1200475 60 Ductile Iron Push-On Pipe E - Sewer 4" 350 $
16 1 1200485 189 Ductile Iron Push-On Pipe E - Sewer 6" 350 $
17 1 1200496 80 Ductile Iron Push-On Pipe E - Sewer 8" 350 $
Section 2 - Lines 12-17 TOTAL $
Section 2 Pipe Manufacturer Delivery Time ARO
IFB 26-036 MJ DI Pipe and Fittings Page 6 of 8

IFB 26-036 MJ DI PIPE AND FITTINGS
BID SHEET
SECTION 3 - WATER PIPE FITTINGS
Item 12 mth Class Price per
Lawson # Description Category Size
# usage Each
18 1 2200190 1 MJ Bend 11-1/4 Degree C - Water 6" 350 $
19 1 2200260 2 MJ Bend 22-1/2 Degree C - Water 4" 350 $
20 1 2200270 2 MJ Bend 22-1/2 Degree C - Water 6" 350 $
21 1 2200280 1 MJ Bend 22-1/2 Degree C - Water 8" 350 $
22 1 2200290 6 MJ Bend 22-1/2 Degree C - Water 10" 350 $
23 1 2200330 1 MJ Bend 45 Degree C - Water 3" 350 $
24 1 2200350 11 MJ Bend 45 Degree C - Water 6" 350 $
25 1 2200360 8 MJ Bend 45 Degree C - Water 8" 350 $
26 1 2200370 5 MJ Bend 45 Degree C - Water 10" 350 $
27 1 2201700 2 MJ Sleeve C - Water 3" 350 $
28 1 2201710 6 MJ Sleeve C - Water 4" 350 $
29 1 2201720 14 MJ Sleeve C - Water 6" 350 $
30 1 2201730 17 MJ Sleeve C - Water 8" 350 $
31 1 2201740 5 MJ Sleeve C - Water 10" 350 $
32 1 2201750 4 MJ Sleeve C - Water 12" 350 $
33 1 2201760 1 MJ Sleeve C - Water 14" 350 $
34 1 2201770 2 MJ Sleeve C - Water 16" 350 $
35 1 2201780 1 MJ Sleeve C - Water 18" 350 $
36 1 2200430 8 MJ Bend 90 Degree C - Water 3" 350 $
37 1 2200440 10 MJ Bend 90 Degree C - Water 4" 350 $
38 1 2200450 16 MJ Bend 90 Degree C - Water 6" 350 $
39 1 2200460 8 MJ Bend 90 Degree C - Water 8" 350 $
40 1 2200470 4 MJ Bend 90 Degree C - Water 10" 350 $
41 1 2200480 5 MJ Bend 90 Degree C - Water 12" 350 $
42 1 2201900 6 MJ Tee C - Water 3" x 3" 350 $
43 1 2201910 4 MJ Tee C - Water 4" x 3" 350 $
44 1 2201920 5 MJ Tee C - Water 4" x 4" 350 $
45 1 2201930 7 MJ Tee C - Water 6" x 4" 350 $
46 1 2201940 4 MJ Tee C - Water 6" x 6" 350 $
47 1 2201945 2 MJ Tee C - Water 8" x 4" 350 $
48 1 2201950 1 MJ Tee C - Water 8" x 6" 350 $
49 1 2201960 4 MJ Tee C - Water 8" x 8" 350 $
50 1 2202110 3 MJ Anchor Tee C - Water 6" x 6" 350 $
51 1 2200600 2 MJ Cap C - Water 4" 350 $
52 1 2200620 6 MJ Cap C - Water 6" 350 $
53 1 2200630 3 MJ Cap C - Water 8" 350 $
54 1 2200640 3 MJ Cap C - Water 10" 350 $
55 1 2200650 2 MJ Cap C - Water 12" 350 $
IFB 26-036 MJ DI Pipe and Fittings Page 7 of 8

IFB 26-036 MJ DI PIPE AND FITTINGS
BID SHEET
SECTION 3 - WATER PIPE FITTINGS (Cont'd)
12 mth Class Price per
Item # Lawson # Description Category Size
usage Each
56 12200010 11 MJ Adapter (FL x PE) C - Water 3" x 18" 350 $
57 12200020 6 MJ Adapter (FL x PE) C - Water 4" x 18" 350 $
58 12200030 3 MJ Adapter (FL x PE) C - Water 6" x 18" 350 $
59 12200040 1 MJ Adapter (FL x PE) C - Water 8" x 18" 350 $
60 12201410 2 MJ Tap Plug C - Water 3" x 2" 350 $
61 12201420 6 MJ Tap Plug C - Water 4" x 2" 350 $
62 12201430 3 MJ Tap Plug C - Water 6" x 2" 350 $
63 12201440 1 MJ Tap Plug C - Water 8" x 2" 350 $
64 12201310 1 MJ Plug C - Water 2" 350 $
65 12201315 1 MJ Plug C - Water 3" 350 $
66 12201320 1 MJ Plug C - Water 4" 350 $
67 12201330 1 MJ Plug C - Water 6" 350 $
68 12201340 1 MJ Plug C - Water 8" 350 $
69 12201350 1 MJ Plug C - Water 10" 350 $
70 12201360 1 MJ Plug C - Water 12" 350 $
71 12201570 1 SEB Reducer (Small Bell End) C - Water 4" x 3" 350 $
72 12201590 1 SEB Reducer (Small Bell End) C - Water 6" x 4" 350 $
73 12201600 1 SEB Reducer (Small Bell End) C - Water 8" x 4" 350 $
74 12201610 1 SEB Reducer (Small Bell End) C - Water 8" x 6" 350 $
Section 3 - Lines 18-74 TOTAL $
Section 3 Fittings Manufacturer Delivery Time ARO
Company Name Payment Terms
Address City, State, Zip ______
Submitted By Title
Please Print
Phone Email Address
Please Print
The signer declares under penalty of perjury that she/he is authorized to sign this document and bind the company or
organization to all terms and conditions of this agreement.
Signature Date
IFB 26-036 MJ DI Pipe and Fittings Page 8 of 8