Little Goose Lower Snake River Spare Transformers

Active

Contract Opportunity

Introduction:

This is a notice for Industry Day to be held on December 18, 2024, between 8:00am – 9:00am Pacific Time (PT) with individual breakout sessions (TBD see below) virtually via Webex. This notice is issued by the United States Army Corps of Engineers (USACE), Walla Walla District, for the Little Goose Spare Transformers for Lower Snake River (LSR) Plants Project. This notice does not constitute a Request for Proposal, Invitation for Bid, or Request for Quotation, and it is not to be construed as a commitment by the Government to enter into a contract. Furthermore, responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with Industry Day attendance or otherwise responding to this notice.

Background and Description

The purpose of the project is to procure spare single-phase generator step-up transformers for use at the LSR powerhouses (Little Goose Lock and Dam, Lower Granite Lock and Dam, and Lower Monumental Lock and Dam). These transformers will be in long term storage at Little Goose Dam until needed to replace an existing transformer. Installation of these transformers will be under a separate contract.

The anticipated tasks for this project include but are not limited to the following:

• Design, fabricate, test, deliver, off-load, assemble, test, and inspect two 164/218.666MVA, 500kV Y/288.684kV to 13.2kV ONAN/ONAF single-phase transformer, designated T1 to the Little Goose Dam.


• Design, fabricate, test, deliver, off-load, assemble, test, and inspect one 82/109.334MVA, 500kV Y/288.684kV to 13.2kV ONAN/ONAF single-phase transformer, designated T2, to the Little Goose Dam.


• The new T1 transformers must be designed to replace any of the existing T1 transformers located at any of the LSR powerhouses, with minimum modifications to existing equipment during installation.


• The new T2 transformer must be designed to replace any of the existing T2 transformers located at any of the LSR powerhouses, with minimum modifications to existing equipment during installation.


• The existing transformers are shell-form transformer designs. A shell-form or a core-form design is acceptable as long as the transformers meet the critical dimensions and requirements specified.


• The existing transformers have an inert-gas oil preservation system, and transformer designs that utilize an inert-gas oil preservation system are preferred. A constant oil pressure system is an acceptable alternative; however, the design must ensure the transformer components maintain a minimum of 105” clearance from the overhead 500kV conductors per IEEE standard 1427.


• Factory acceptance testing in accordance with IEEE C57.12.00 and the specified requirements.


• Provide transformer movement plan(s) to transport the transformers from the factory to the designated long term storage area.


• Delivery to the Little Goose Project Storage Yard. This activity includes but is not limited to hauling, off-loading and placement in the long-term storage area, site assembly, oil-filling, field testing, and provisions for long term storage, with all work witnessed by the manufacturer’s Erecting Engineer.

The purpose of Industry Day is to determine whether there are interested and qualified firms to provide the spare transformers described above, to answer questions/concerns, and allow the Government to obtain specific feedback from your company’s representative.

Registration for participating in the Industry Day is required. Please see “Registration” below for Instructions.

Registration

To register, please submit requested information below electronically to Alan Inglis at alan.n.inglis@usace.army.mil no later than 2:00 pm PT, December 12, 2024. The email Subject must be marked with your company name followed by “Industry Day, T1 and T2 Spare Transformers for Lower Snake River Plants”. All documents should be in Microsoft Word Format or Adobe Portable Document Format (PDF).

1. The Cover Sheet should include a non-binding statement of interest and must indicate if your firm intends to participate virtually and must include:

- Company name, address, and Commercial and Government Entity (CAGE) or Unique Entity Identifier (UEI).

- Name of attendees (limit to three) and contact information for each, including telephone numbers and e-mail addresses.

2. Brief description of the company; years in business; size of company (small business or other that small business for NAICS 335311); and socioeconomic status.

3. Capability statement and encouraged to provide further details of your firm’s experience in the Design, Fabrication, Testing, Delivery, offloading of the Transformers at the site, assembly of the Transformers at the site and site inspection activities.

4. Specify if attending the open forum and/or requesting a one-on-one session.

Agenda for the Industry Day:

8:00am – 9:00am PT, December 18, 2024, via Webex for all attendees:

1. USACE Introduction.


2. USACE Slide Presentation.


3. Questions.

The following times slots are for individual company breakout sessions (one-on-ones). These meetings will be held privately between USACE multi-functional team and interested firms. Please limit the number of company representatives to no more than three attendees to facilitate effective one-on-one dialogues.

Marketing/capability briefings are not authorized during the one-on-one sessions.

If interested, please submit your top three time slots (all time slots are in PT zone) choices with your registration:

• Time slot 1: 9:30am - 10:00am


• Time slot 2: 10:15am - 10:45am


• Time slot 3: 11:00am– 11:30am


• Time slot 4: 1:00pm – 1:30pm


• Time slot 5: 1:45pm – 2:15pm


• Time slot 6: 2:30pm – 3:30pm

USACE appreciates industry’s collaboration and is looking forward to a meaningful and productive session. If you have questions regarding Industry Day or questions you would like to submit in advance, please provide them to Mr. Alan Inglis no later than 2:00 pm PT, December 12, 2024, at the email address noted above.

Attachments/Links