Install Fiber in Buildings 208 to 209

Fiber Optic Cable Installation Requirements

1. Starting Point (Building 209 - Communication Room):

o Install an LC adapter panel in the northwest corner of the communication room, adjacent to the .EDU switch rack.

o Route the fiber optic cable along the upper wall, adjacent to the adapter panel, into the next room where the conduit entry is located.

2. Conduit Routing:

o Utilize the pre-installed 60-foot underground conduit connecting Building 209 and Building 208.

o Use the pre-installed pull string/rope/tape to guide the fiber optic cable through the conduit.

o Ensure the existing duct seals at both conduit ends remain intact to maintain waterproofing and firestopping standards.

3. Routing in Building 208 (Theater):

o Upon entry into the mechanical room, route the fiber cable through the wall to the left of its entry point.

o Secure the cable along the wooden ceiling within the crawl space beneath the theater for approximately 100 feet.

o Transition the cable vertically at the north end of the building through an unused airshaft into the lobby preceding the projector room.

4. Termination and Enclosure (Projector Room Lobby):

o Install a 6-port LC fiber adapter panel adjacent to an electrical outlet on the south side of the projector room lobby.

o Mount the fiber optic cable in the specified low-profile, switch-depth wall-mount mini rack enclosure.