USCGC Healy Power Supply

Active

Contract Opportunity

USCGC Power supply this is for informational purposes only. This has been awarded VIA JOTFOC.

STATEMENT OF WORK (SOW)

FOR

Impressed Current Cathodic Protection (ICCP) System Replacement

CGC Healy’s existing AQ3 ICCP Controller Power Units are obsolete and no longer supported by the OEM. Cutter is no longer able to get solid state parts to repair faults and if a major fault occurs to one of the main motherboards, protection of the hull will be compromised. Original PO# 70Z08525LREP0049 was delivered, but later identified that components were the incorrect configuration. The correct components are listed below and will allow for the installation of the replacement system. System is currently operating with no available spares and has an immediate need for the requested parts outlined in this Statement of Work (SOW).

1. 
   
   
   
   1. OBJECTIVE
   
   
   
   

The goal is to supply CGC Healy with the parts listed in the table below.

Item Description

Part Number/ID Number

Qty

Aquamatic 4 (AQ4) Computer-Controlled Switch Mode Power Supplies in a drip-proof NEMA 3R enclosures

AQ-300/36

2

The parts shall be purchased from manufacturer and must be a certified Wilson Walton part. No aftermarket substitutions will be accepted. Part is needed as soon as possible.

The parts shall be individually packaged and shipped to:

SFLC

Attn: Forrest Heath

1519 Alaskan Way South

Seattle WA, 98134

The part has a 3-week lead time.

Please contact CWO2 Corry Thomas at (216) 815-2046 or corry.d.thomas@uscg.mil with questions regarding this SOW.

Attachments/Links