CITY OF DODGE CITY, KANSAS
Standard Specifications
For
One (1) New Sedan or Mid-Sized SUV
GENERAL PROVISIONS: Sealed bids for one (1) New Sedan or Mid-Sized SUV are invited
and will be received until 10:00 a.m. Friday, January 30th, at the office of the Municipal
Services Building, 100 Chaffin Road, Dodge City, Kansas 67801-0880. All bids will be opened
immediately thereafter.
This bid form shall be submitted, together with complete specifications for the equipment being
proposed, in a sealed envelope clearly marked “SEALED BID: One (1) New Sedan or Mid-
Sized SUV ” Failure to use said bid form may be grounds for rejecting any such bid.
Bids submitted by mail shall be sealed in an envelope marked as indicated above and mailed in a
second envelope to the City Clerk at the address indicated. Bids may also be emailed to
bids@dodgecity.org. Note that vendors emailing bids should verify with Ryan Reid that they
were received. Vendor also assumes any risks associated with electronic transmission, security
or otherwise.
The equipment regardless of source deemed to furnish the best service for the City will be
recommended to the City Commission. The City is exempt from State and Federal taxes.
SCOPE: This specification describes a new vehicle. All federal and state safety regulations
pertaining to motor vehicle construction and compulsory equipment shall be part of this
specification.
ADHERENCE TO SPECIFICATIONS: Deviation from any of the requirements below shall
be stated on the bid form or attached to said form unless so stated by the bidder. The City of
Dodge City shall assume that requirements have been met and shall hold the bidder to each part
of the specifications.
Bid Deadline: Friday, January 30th at 10:00 am.. Send questions to Ryan Reid, Director of Administration, City
of Dodge City: rtreid@dodgecity.org
“Approved equal” shall mean equipment and/or components, which will furnish the level of
service required. The equal product shall be the same or better than that described. The City
shall be the sole judge of suitability.
HEAVY DUTY: If used in this specification, heavy duty shall mean the item to which the term
is applied shall exceed the usual quality, quantity or capacity supplied with standard production
equipment and shall be able to withstand unusual strain, exposure, temperature, wear and use.
WARRANTY: The vehicle shall be for a new model car and shall be completely prepared for
customer delivery through service by a factory franchise dealer prior to delivery. Each unit shall
include all inspections coupons, certicards or warranty identification cards normally furnished in
the trade in accordance with standard warranty policy. Said warranty maintenance required,
when performed by the City of Dodge City shop shall be acceptable to the dealer when it meets
or exceeds the dealer’s certification requirements. Evidence of such preventative maintenance
shall be furnished by the City at no cost.
IMPLEMENTATION OF WARRANTY: The bidder shall furnish an outline of the method of
implementation of the manufacturer’s standard warranty.
DELIVERY: Each unit shall be completely serviced, including packing of front wheels and
lubricated, at the time of delivery in accordance with factory service specifications. The vehicle
shall be properly cleaned, windows washed inside and outside and all stickers, markings and
protective coatings removed from the glass. The vehicle shall be delivered with separate
invoices, registration warranty papers, pre delivery inspection sheets and required manuals.
Vehicle shall have a full tank of gas upon delivery. In any case where a vehicle is delivered
minus any detail, including parts, items or accessories issued as standard manufacturer’s
equipment and/or as specified by the City, the Dealer will be notified immediately and he shall
furnish the missing detail within 72 hours, otherwise the City reserves the right to purchase such
detail from another source and bill the Dealer for the cost including installation.
The use of Dealer identifying items such as license plate frames, bumper stamps, dealer tags or
any type of Dealer advertising shall not be permitted. The City will not accept delivery of any
vehicle if such material is attached and should it be necessary for the City to require the removal
of any such items, any damaged caused to the vehicle shall be repaired by the Dealer in a like-
new condition.
Bid Deadline: Friday, January 30th at 10:00 am.. Send questions to Ryan Reid, Director of Administration, City
of Dodge City: rtreid@dodgecity.org
INFORMALITY: The City of Dodge City reserves the right to reject any or all bid, waive any
informality or to select any bid deemed to be in the best interest of the City of Dodge City. If
desired, the City may purchase more or less vehicles than indicated.
TRADE IN: No trade-ins are offered. Price bid shall be full price FOB Dodge City.
Bid Deadline: Friday, January 30th at 10:00 am.. Send questions to Ryan Reid, Director of Administration, City
of Dodge City: rtreid@dodgecity.org
DETAILED MINIMUM SPECIFICATIONS:
Example vehicles that the City considers ideal include: certain, Accords, Camrys, Trailblazers,
Terrains, Rav4, HR-V, Sorento, K5. Questions on type of vehicles can be directed to the Director
of Administration, Ryan Reid, at rtreid@dodgecity.org or 620-225-8100.
Manufacturer’s Warranty: Warranty period shall begin when the vehicle is placed into
service by the City. The minimum warranty requirements are as follows:
Warranty should be at least three years/36,000 miles, 100% labor and parts on entire vehicle, no
deductible including battery, with exception for tires, service adjustments, and consumable
items.
Comply_____ Exceptions_____
Warranty should cover Emission System (5 years/100,000 miles), powertrain control module,
and catalytic converter.
Comply_____ Exceptions_____
Vehicles, warranty should cover Corrosion (minimum 0-60 months/100,000 miles).
Comply_____ Exceptions____
Service Facilities: The vender shall operate a service facility capable of performing most repairs
associated with the equipment they represent. This facility shall be stocked with common
replacement and high wear parts, as may be designated by the equipment manufacturer, and
approved by the City.
Comply_____ Exceptions_____
Technical Requirements: The following are minimum specifications for the units described.
All features below shall be incorporated in the equipment and all items furnished and installed
into a complete unit ready for operation.
Bid Deadline: Friday, January 30th at 10:00 am.. Send questions to Ryan Reid, Director of Administration, City
of Dodge City: rtreid@dodgecity.org
ELECTRICAL EQUIPMENT:
Two (2) power outlets with covers mounted in the dash.
Comply_____ Exception_____
Power mirrors
Comply_____ Exception_____
AM/ FM radio with usb inputs
Comply_____ Exception_____
Power windows (preferably tinted) and door locks.
Comply_____ Exception_____
Vehicle shall be provided with cruise control for highway driving. Comply_____ Exception_____
Vehicle shall have remote start
Comply_____ Exception_____
FUEL TANK:
Capacity as regularly furnished, containing a FULL AMOUNT of fuel at the time of delivery to
the City.
Comply_____ Exception_____
KEYS:
Three keys/fobs shall be provided
Comply_____ Exception_____
SPECIAL:
Vehicles must have floor mats for both front and rear seating of the vehicle
Comply_____ Exception_____
Vehicle should be AWD
Comply_____ Exception_____
Vehicle should be at least 2.5L-or larger V4 or V4 Turbo
Comply_____ Exception_____
Back hatch area, with cargo cover, large enough to store 21”x16”x28” portable toolbox or larger,
along with over equipment
Comply_____ Exception_____
Bluetooth and aux input connectivity required for using equipment through vehicle speaker.
Comply_____ Exception_____
Bid Deadline: Friday, January 30th at 10:00 am.. Send questions to Ryan Reid, Director of Administration, City
of Dodge City: rtreid@dodgecity.org
This is the opportunity summary page. It provides an overview of this opportunity and a preview of the attached documentation.