Ozone Analyzers

The mandatory technical criteria are:

Item        Criteria        Reference to substantiation in the Technical Bid

M1        Must have detection limit of ≤0.5 ppb

M2        Must have zero drift of ≤1.0 ppb (24 hours)

M3        Must have span drift ≤ 1% (month)

M4        Must have precision of ≤1 ppb

M5        Must have response time of ≤30 seconds (to 95%)

M6        Must have linearity of ≤1% (full scale)

M7        Must have zero noise of ≤0.25 ppb

M8        Must have remote access/control capabilities

M9        Must have communication capabilities by Modbus

M10        Must have 0-5 V analog outs capabilities

M11        Must have digital output capabilities for concentrations and other recorded parameters

M12        Must have a sample/zero valve.

M13        Must have a nafion dryer on sample line

M14        Must have selectable instrument range capabilities (with a minimum of 0-100 ppb)

M15        Must have dedicated instrument or web based software

M16        Instrument must be able to safely operate between 15 and 35 C

M17        All instruments must be new and unused and shall bear certification of Canadian Standards Association (CSA)

M18        Must operate on the standard power in Canada of 120V 60 Hz

M19        Support, service and spare parts must be available for a minimum of 8 years after delivery of the first analyzers.

M20        All analyzers must be provided with a 2 year instrument warranty

M21        Supplier must provide reference and contact information that instrument or previous model is currently operating in a Canadian federal or provincial network or US network.

M22        Instrument must have future upgrade capabilities of adding a span option.

The responsive bidder already holding a Supply arrangement for Laboratory and Scientific Equipment, Parts and Accessories, Services and Supplies from Public Works and Government Services Canada who meets the mandatory technical criteria with the lowest aggregate price will be recommended for contract award.

A contracting officer can use limited tendering for specific reasons outlined in the applicable trade agreements. The reason for this contract is described below:

• None