City of Columbus
Department of Public Utilities
Water Division
Mobile Hydraulic Power Units
The City of Columbus Water Division has a need for Three (3) Mobile Hydraulic Power
units. This request is for the purchase, installation and training of a new, unused, and
complete most current model Stanley HP28 Power Unit. The specifications describe the
minimum acceptable requirements which a bidder has to meet. The following features
are required:
1. The machines shall meet or exceed the specifications of a Stanley HP28B02
Power Unit.
2. The Machines shall be twin circuits.
3. Each circuit must have a minimum of 8 GPM that can run simultaneously with
each other.
4. Must have a minimum of 2000psi operating pressure
5. Circuit shall be open center
6. Hydraulic reservoir capacity shall be a minimum of 3.2 US GAL.
7. Fuel Tank capacity shall be a minimum of 4.5 US GAL.
8. Hydraulic couplers must be HTMA flush face “quick coupler”
9. Gas driven engine shall be a minimum of 27HP
10. Unit shall not weigh more than 360lbs
11. Unit shall measure at maximum 38in long x 26 in wide x 30in tall.
12. Unit shall have at minimum of one (1) 12v DC power plug to allow other tooling to
be powered off unit.
13. Unit shall have lifting hook secured to top
14. Unit shall have fixed side handles
15. Unit shall have two (2) solid rubber tires
16. Unit shall have foldable front lifting bar as to pivot on wheels for mobility.
17. Unit shall be delivered to the city with two (2) sets of twinned 50ft x ½ in hose
and couplers.
18. Factory warranty shall be a minimum of 1 year.
19. Delivery and training shall be included with the purchase and shall be conducted
at 910 Dublin Road Columbus OH 43215.
20. Successful bidder shall be required to respond on-site with factory trained
technicians within 24 hours of receiving a service call and/or email.
21. An in person demonstration may be required prior to award and purchase of the
machine.
City of Columbus
Department of Public Utilities
Water Division
Mobile Hydraulic Power Units
A detailed attachment clearly identifying the Manufacturer, Model Name, and Number of
the equipment offered is required. Instructions for adding attachments to can be found
on Page 15 of the Vendor Services Guide:
http://vendors.columbus.gov/_layouts/ep/custom/other/VendorUserGuide.pdf