20 and 24-Foot Box Trailers

20-foot box trailer -SPECIFICATIONS- Gross Vehicle Weight Rating (GVWR): Minimum 14,000 pounds. Size: Interior Net Height (including beam width and lighting width): Minimum 7 feet, 4 inches (88 inches). Trailer Width: 8.5 feet. Length: 20-foot box Both the 20-foot box and 24-foot box trailers to be built to work and look the same. Frame: Frame Type: Rectangular Tube. Frame Material: Aluminum (Minimum 11 gauge for frame). Frame Configuration (Spacing on Center): 12 inches of spacing. Nose Type: Flat. Tongue Option: A-Frame (Extended). Front Jack Options: Electric. Ball Coupler: 2 5/16 inches. Wiring: Wire tubing around wires along the inside of frame. Roof: Rounded Aluminum with no seams. Seam: Aluminum (Seamless). Vent: Minimum two (2) Vents Centered Vents must be hood covered and evenly distributed on center. Walls, Flooring, and Doors: Attachment Method: Screwless. Insulated walls, ceiling, and roof. Under Flooring Corrosion-Inhibiting Moisture Barrier. Rubber Tread Plate (RTP) on interior floor and wheel wells. Skin Thickness: 0.05 inches. Curb Side Door: Minimum 36 inches X 78 inches - forward placement. Rear Door Type: Heavy Duty Ramp Door with flap and extension Prefer gapless continuous hinge. Flooring Material: Aluminum. Axle, Suspension, Brake, and Tire: Number of Axles: Two (2) (tandem) - 7,000 pounds per axle. Type of Axles: Torsion. Brake System: Electric Tire Size: Must be ST235/80R16 Radial Tire Load Range: Minimum E-10 ply rated. Spare tire and wheel must be included and the same as what on the trailer Cargo and Interior Area: E-Track        : Must be attached to frame by weld. Wall Locations: Three (3) recessed tracks the length of the entire wall - On center at 15 inches, 44 inches, 64 inches. Floor Locations: Three (3) recessed tracks - Entire length of floor - Placed on both outer edges and one on center. D-Rings: Attached to frame by weld. Floor Locations: Minimum six (6) recessed, 5,000 pounds each, D-Ring anchors (2 - Front, 2 - On Center, 2 - Rear). Lighting: Interior Light-Emitting Diode (LED) - Minimum of three (3) with dual switches (front and back door) Four (4) LEDs preferred. Awning: Full trailer length (Curb Side) electric awning to provide shelter from the sun and rain. Exterior Lighting: All LED running lights and rear lights. Hi-Visibility: Reflective Conspicuity Tape. Outside Protection: Aluminum Tread Plate (ATP) - Front of trailer only. Door Options: Barlock closures on all doors. Trailer color is to be Black with all wheels and trim black out. Skid plates on the rear corners of the trailers. *SHIPPING TO BE INCLUDED IN BID OFFER* *Delivery preferred by 6/30/2025* Shipping address: 111 Corporate Drive Frankfort, KY 40160

24-foot box trailer -SPECIFICATIONS- Gross Vehicle Weight Rating (GVWR): Minimum 14,000 pounds. Size: Interior Net Height (including beam width and lighting width): Minimum 7 feet, 4 inches (88 inches). Trailer Width: 8.5 feet. Length: 24-foot box Both the 20-foot box and 24-foot box trailers to be built to work and look the same. Frame: Frame Type: Rectangular Tube. Frame Material: Aluminum (Minimum 11 gauge for frame). Frame Configuration (Spacing on Center): 12 inches of spacing. Nose Type: Flat. Tongue Option: A-Frame (Extended). Front Jack Options: Electric. Ball Coupler: 2 5/16 inches. Wiring: Wire tubing around wires along the inside of frame. Roof: Rounded Aluminum with no seams. Seam: Aluminum (Seamless). Vent: Minimum two (2) Vents Centered Vents must be hood covered and evenly distributed on center. Walls, Flooring, and Doors: Attachment Method: Screwless. Insulated walls, ceiling, and roof. Under Flooring Corrosion-Inhibiting Moisture Barrier. Rubber Tread Plate (RTP) on interior floor and wheel wells. Skin Thickness: 0.05 inches. Curb Side Door: Minimum 36 inches X 78 inches - forward placement. Rear Door Type: Heavy Duty Ramp Door with flap and extension Prefer gapless continuous hinge. Flooring Material: Aluminum. Axle, Suspension, Brake, and Tire: Number of Axles: Two (2) (tandem) - 7,000 pounds per axle. Type of Axles: Torsion. Brake System: Electric Tire Size: Must be ST235/80R16 Radial Tire Load Range: Minimum E-10 ply rated. Spare tire and wheel must be included and the same as what on the trailer Cargo and Interior Area: E-Track: Must be attached to frame by weld. Wall Locations: Three (3) recessed tracks the length of the entire wall - On center at 15 inches, 44 inches, 64 inches. Floor Locations: Three (3) recessed tracks - Entire length of floor - Placed on both outer edges and one on center. D-Rings: Attached to frame by weld. Floor Locations: Minimum six (6) recessed, 5,000 pounds each, D-Ring anchors (2 - Front, 2 - On Center, 2 - Rear). Lighting: Interior Light-Emitting Diode (LED) - Minimum of three (3) with dual switches (front and back door) Four (4) LEDs preferred. Awning: Full trailer length (Curb Side) electric awning to provide shelter from the sun and rain. Exterior Lighting: All LED running lights and rear lights. Hi-Visibility: Reflective Conspicuity Tape. Outside Protection: Aluminum Tread Plate (ATP) - Front of trailer only. Door Options: Barlock closures on all doors. Trailer color is to be Black with all wheels and trim black out. Skid plates on the rear corners of the trailers. *SHIPPING TO BE INCLUDED IN BID OFFER* *Delivery preferred by 6/30/2025* Shipping address: 111 Corporate Drive Frankfort, KY 40160