SATOC for Shipboard Type and Test Site Maintenance

Construction Magnitude between $10 million and $25 million

1.1  SCOPE

a. Furnish construction industrial support to the Naval Surface Warfare

Center, Philadelphia Division (NSWCPD) in Philadelphia PA.

b. Navy shipboard machinery and related support systems and components that

will be the focus of the industrial support services required, may include,

but shall not be limited to, the following:

(1) Electrical power systems: switchboards, motor-generator sets,

transformers, distribution equipment, power converters and cabling for

systems up to 50MW and 13.8 KV.

(2) Gas and Steam Turbine Engines and Generators.

(3) Diesel Engines and Generators.

(4) Shipboard Propulsion Motors and similarly rated Load Generators and

Waterbrakes.

(5) Control systems and control rooms: control consoles, control interface

units, system instrumentation, control cabling, networking switches and

fiber optic cable systems, video camera systems, communication systems,

building automation systems, fire alarm systems and data acquisition

systems.

(6) Machinery Shafting and Transmission systems: reduction gears, speed

increasing gears, clutches, bearings, shafting, machinery couplings and

alignment systems.

(7) Machinery Foundations: welded plate structures, concrete-filled steel

structures, precisely machined mounting surfaces, and shock and

vibration mount systems.

(8) Structures: equipment platforms, access platforms and walkways, engine

intake and exhaust ducting, auxiliary equipment foundations, and piping

and electrical system support structures.

(9) Piping systems: fuel oil, lube oil, hydraulic oil, cooling water, sea

water, fresh water, deionized water, domestic water, drains, compressed

air, start air, FM 200, and engine bleed air systems (systems with

pressures up to 6500PSI and temperatures as high as 1200 degrees).

(10) Heating, Ventilation and Air Conditioning (HVAC) systems.

(11) Civil systems: concrete foundations, piles, bricks, blocks, roof

systems, walls, flooring, etc.

(12) Hull and deck machinery: weapons handling and stowage equipment

elevators.

(13) Auxiliary equipment: pumps, compressors, blowers, fans, heat

exchangers, etc.

(14) Any other shipboard machinery, equipment or related systems regardless

of type or size required by task order.

b. Provide construction support in accordance with design drawings and

design specifications provided by the Government with each individual task

order.

c. Construction support shall primarily be in any of the Navy shipboard

machinery, located on the Philadelphia Naval Business Center, Philadelphia,

PA 19112-5083. Where adequately available, the Contractor shall connect

installed equipment to existing utilities required for the equipment being

installed. Tie-in locations for utility points of connections shall be

submitted to COR/TPOC who then is responsible to provide a copy to Code 362

for review and approval. Equipment installation shall be complete and

operable in all respects including connection to all utility sources,

installation of controls, emergency shutdown, etc.

d. When required, provide construction, renovation, demolition, and

facility construction/maintenance support for buildings, Navy shipboard

machinery, located on the Philadelphia Naval Business Center,

Philadelphia. This support shall include, but not be limited to: minor

construction; office renovations; office configuration and moving; roof

repair and replacement; roof preventative maintenance; heating,

ventilation, and air conditioning; cooling system controls; fuel system

repair; electrical system upgrades; and elevator certification and

maintenance.