|
10MG2330 - METRO – Bus Rapid Transit Bailey Ave Corridor Improvement - Phase 1.
|
|
|
|
|
Document Holder Registration
|
|
|
Add Yourself to the Document Holder List
|
|
|
|
|
Executive Summary
|
|
Updated On
|
05/06/2026
|
|
Bid No.
|
E-628
|
|
Due Date & time
|
06/16/2026 at 10:00 a.m.
|
|
Bid Instructions
|
Have your bid information ready prior to beginning an online bid submission. All bids submitted online are secure and encrypted until the bid opening time and date. No one can view your bid prior to that time. When submitting your bid online please be aware that your session will time out if not saved within 45 minutes and you could lose information you have already typed in prior to a save. After saving a bid you can make changes to your bid over multiple sessions until bid closing time.
|
|
Project Involves
|
New Construction
|
|
Proposals From
|
General Contractors
Specialty Contractors
|
|
Type of Facility
|
Municipal/Government
|
|
Posted in
|
NY
|
|
Location
|
University Station at 3465 Main St, Buffalo, NY 14214
|
|
Estimate
|
$690,000.00
|
|
Description
|
SUMMARY OF WORK
The Work of this project includes furnishing all labor, materials, appliances, tools, equipment and plant, and performing all Work in accordance with these specifications and drawings, with exception of work that is expressly and specifically not included in the project.
The project consists of one (1) contract. Work shall include, but not be limited to:
i. Furnish and install erosion and sediment control measures, including silt
sock and concrete washout area, as required for station improvements.
ii. Excavate for new concrete pads, footings, and foundations, including
backfill, compaction, and disposal of spoils.
iii. Furnish and install concrete foundations, piers, walls, and slab‑on‑grade for
the station shelter, including all reinforcement.
iv. Furnish and erect structural steel, including columns, beams, plates, purlins,
and metal roof decking.
v. Furnish and install architectural station components, including curved
standing‑seam metal roof, impact‑resistant aluminum façade panels,
composite soffits/fascia, laminated glass windscreens, and related joint
sealants.
vi. Furnish and install site furnishings, including floor mounted bench and
blast‑resistant trash receptacles.
vii. Furnish and install electrical systems for the station, including lighting,
conduit and wiring, radiant heaters, panelboard and feeders, grounding, and
penetrations/restoration.
Refer to the Project Manual and Contract Drawings for further information
|
|
|
Bid Documents
|
|
Review Bid Docs at
|
181 Ellicott Street
Buffalo, NY 14203
Engineering Offices 7th Floor
Cindy.Cirbus@nfta.com
|
|
Buy Bid Docs at
|
The Contract Documents may be examined in the 7th Floor Conference Room, 181 Ellicott Street, Buffalo, New York 14203 or on NFTA's Engineering/Contracting website at www.nftaengineering.com. Online registration is required to become a registered user and obtain Contract Documents. A Copy of the Contract Documents is available at no cost and may be requested from Cindy Cirbus at 716-855-7342 or fax 716-855-7447 or downloaded from the NFTA's Engineering/Contracting website. The copy of the Contract Documents may be picked up or sent via courier billed to the requester.
Cindy.Cirbus@nfta.com
|
|
Web Site Link
|
www.nftaengineering.com
|
|
|
Resources
|
|
Owner
|
NFTA
jorge.cueto@nfta.com
|
|
Designers
|
Creighton Manning Engineering, LLP
2 Winners Circle, Albany, NY 12205
Mr. Mark Sargent
(518) 469-8063
msargent@cmellp.com
|
|
Special Instructions
|
The NFTA reserves the right to cancel this procurement, waive irregularities, reject any or all bids and extend the bidding period.
The Bid security must accompany each bid and must be in an amount not less than ten percent of the total bid price if the base bid exceeds $50,000.00. Bid security may be submitted prior to bid opening either electronically utilizing Surety2000 at www.surety2000.com or delivered to the NFTA in an opaque sealed envelope. Details for electronic submission are provided on the NFTA’s Engineering Branch website. In the event a bidder utilizes an offline bid but provides bid security electronically the electronic bid bond number must be submitted with the offline bid.
The Contractor shall perform not less than 46% of the work with its own labor forces.
The time of substantial completion for the project is 308 calendar days after receipt of the Notice to Proceed (NTP).
Refer to Technical Specification Section 01 11 00 “Summary of Work” for the anticipated date of Notice to Proceed, Project Duration, and additional time constraints associated with this project.
Liquidated damages will be assessed against the Contractor for its failure to complete the project within the time specified as described in Technical Specification Section 01 11 00 “Summary of Work”.
The percentage goal of Disadvantaged Business Enterprise (DBE) participation in the project shall be 0% (zero percent).
Technical questions should be submitted via email to Creighton Manning Engineering, LLP, Mark Sargent, PE, at msargent@cmellp.com. Administrative questions should be submitted via email to NFTA, Jorge Cueto, email: jorge.cueto@nfta.com.
Technical or administrative questions must be submitted before June 8, 2026, at 10:00 am.
A Pre-Bid conference will be held on May 22, 2026, at 09:00 a.m. at the 1st Floor Conference Room of the Metropolitan Transportation Center (MTC) located at 181 Ellicott Street, Buffalo, New York 14203. Note that parking is not provided.
|
|
|
|
Posted by
|
|
|
|
|
