Sleeves for Ductile and Cast-Iron Pipe

Location:	Oklahoma
Posted:	Dec 15, 2025
Due:	Jan 7, 2026
Agency:	City of Tulsa
Type of Government:	State & Local
Category:	13 - Ammunitions and Explosives
Solicitation No:	IFB 26-836
Publication URL:	To access bid details, please log in.

Attachment Preview

City of Tulsa

12/12/2025

Finance Department

INVITATION FOR IFB 26-836

Addendum #1

Please note the following changes which have been made for clarification to this Invitation for Sealed Bid. This

addendum must be listed as Addendum #1 on the ACKNOWLEDGMENT OF RECEIPT OF

ADDENDA/AMENDMENTS FORM of the bid package as verification that you have received and are aware of

the information contained herein.

QUESTIONS/CLARIFICATION/CHANGES:

Title of IFB was Sleeves for Concrete Pipe.

Changed to Sleeves for Ductile and Cast-Iron Pipe.

Page 4, Specifications:

Was: Type 304 or 316 Stainless Steel bolt material accepted.

Changed to: Type 304 or 316 Stainless Steel bolt material required.

IFB 26-836 | Sleeves for Ductile and Cast-Iron Pipe | Issue Date: 12/11/2025

Invitation for Bid (IFB)

IFB 26-836

Supplies or Services Requested: Sleeves for Ductile and Cast-Iron

Pipe

Department: Water and Sewer Department

NIGP Commodity Code(s): 659-06

Solicitation Schedule

EVENT

IFB Issue Date

DATE

12/11/2025

Pre-Bid Conference

Deadline for Questions

Submitted to assigned buyer via email.

Bid Submission Date

Either mailed or delivered to City Clerk address. Bids

are open the day after the due date.

No Pre-Bid Conference

12/29/2025

10 Days prior to IFB due date

1/7/2026

If You have any questions or need additional information, contact the Assigned Buyer:

Julie Miller, Buyer | jamiller@cityoftulsa.org

All questions should be emailed with IFB 26-836 on the subject line.

Submit Bids (sealed) to:

City of Tulsa – City Clerk’s Office

175 E. 2ND St., Suite 260

Tulsa, OK 74103

Bids (2 total:1 original, 1 copy) must be sealed and either mailed or delivered.

Write the Bid Number, Supplies or Service requested (as listed above) and Bid

Opening Date on the lower left corner of the outside of Your Bid envelope. Feel

free to use included packing slip. No faxed or emailed Bids will be considered.

Barring certain circumstances (Section III-5), Bids received after the stated date

and time will not be accepted and will be returned to the Bidder unopened.

IFB Rev 02/2024

IFB 26-836 | Sleeves for Ductile and Cast-Iron Pipe | Issue Date: 12/11/2025

I. STATEMENT OF PURPOSE:

1. Overview and Goals

The goal of this solicitation is to secure a source to purchase Sleeves for Ductile and Cast-Iron Pipe

for the Water and Sewer Department of the City of Tulsa.

2. Term of Contract

The City intends to award a one-year annual contract. The City may offer the Seller the opportunity

for additional one-year terms. The City also reserves the right to make multiple or partial awards. To

do business with the City, You must agree to the terms and conditions of the City’s standard

Purchase Agreement, indicated by Your Authorized Agent’s signature on the Purchase Agreement.

Capitalized terms used in this IFB and not defined in the Purchase Agreement shall have the

meanings as ascribed to them in Title 6, Chapter 4 of the Tulsa Revised Ordinances.

The entire Invitation for Bid (IFB), including any additional information submitted by Bidder and

Accepted by City will be included as part of the Agreement between Seller and City. All sheets of

this IFB (including Sections I-VI) must be submitted.

Authorized Agent

Several parts of the Bid (Affidavits, Purchase Agreement) must be signed by an “Authorized

Agent.” An Authorized Agent means an agent who is legally authorized to bind the Seller under the

law of the state in which the Seller is legally organized. For instance, under Oklahoma law, the

Authorized Agent for each of the following types of entities is as stated below:

o Corporations – the president, board chair or board vice chair (or the vice president if the corporation

was formed in Oklahoma) can sign; others can sign if they have and provide the City with (i) a corporate

resolution giving them authority to bind the Seller, and (ii) a recent certificate of secretary indicating

the authority is still valid and was in full force and effect on the date of the signature. (See IFB Section

VI for sample of a Certificate of Secretary)

o General Partnerships – any partner can sign to bind all partners.

o Limited Partnerships – the general partner must sign.

o Individuals – no additional authorization is required, but signatures must be witnessed and notarized.

o Sole Proprietorship – the owner can sign. Any other person can sign if s/he provides a recent Power

of Attorney, signed by the owner, authorizing him/her to bind the sole proprietorship.

o Limited Liability Company (LLC) – any manager of the LLC elected by the members of the LLC, or

any member signing as manager of the LLC. All other signers will need a Consent of Members signed

by all the Members of the LLC authorizing their signature on or up to 30 days before the date of their

signature. (See Section VI for sample of a Consent of Members)

Entities organized in states other than Oklahoma must follow the law of the state in which they are

organized.

IFB Rev 02/2024

IFB 26-836 | Sleeves for Ductile and Cast-Iron Pipe | Issue Date: 12/11/2025

II. SCOPE OF SERVICES AND SPECIFICATIONS

1. Scope of Services

The City is requesting Bids for Sleeves for Ductile and Cast-Iron Pipe for the Water and Sewer

Department.

Delivery Requirements

All prices quoted shall be based on delivery F.O.B. Tulsa, Oklahoma or to any other points as may

be designated in the Specifications, with all charges prepaid by Seller to the actual point of delivery.

Bids must state the number of Days required for delivery under normal conditions.

Absolutely no items over 500lbs. may be directly shipped to the City requiring the City personnel to

unload from the shipping truck or trailer. The City carries no responsibility for any damages incurred

during an unloading occurrence. All unloading shall be the responsibility of the Seller and/or shipping

entity.

2. Specifications

The Bid must meet or exceed the following Specifications.

• 24-in TC400-25.80-26.80 X 25.80-26.80 O.D. Range SHOP COAT 304SS B&N or

acceptable equivalent

• 30-in TC400-31.74-32.74 X 31.74-32.74 O.D. Range SHOP COAT 304SS B&N or

acceptable equivalent

• 36-in TC400-37.96-38.96 X 37.96-38.96 O.D. Range SHOP COAT 304SS B&N or

acceptable equivalent

• 48-in TC400-50.50-51.50 X 50.50-51.50 O.D. Range SHOP COAT 304SS B&N or

acceptable equivalent

GASKETS

Nitrile Butadiene Rubber (NBR) compounded for water and sewer service resistant to hydrocarbons.

Meeting the requirements of American Society for Testing & Materials (ASTM) D 2000.

BOLTS AND NUTS

High strength low alloy steel bolts and nuts. Steel must meet American Water Works Association

(AWWA) Standard C111. Type 304 or 316 Stainless Steel bolt material required.

COATINGS

Shop coat to be applied to parts for corrosion protection.

IFB Rev 02/2024

IFB 26-836 | Sleeves for Ductile and Cast-Iron Pipe | Issue Date: 12/11/2025

III.

BID SUBMISSION INSTRUCTIONS AND INFORMATION

1. Bidder Registration: To ensure timely updates and alerts about business opportunities with the

City, interested Bidders should register as a Bidder with the City. To register, interested Bidders

should complete the City’s vendor registration form by contacting Andrea Evans at

purchasing@cityoftulsa.org or check the City’s "Selling to the City" Website.

2. Pre-Bid Conference: If a pre-Bid conference is required, see the first page for time and location.

No Pre-Bid Conference

3. Questions and Concerns: As You prepare Your Bid response, You may have questions or points

of clarification around this Solicitation. Any questions or comments about this Invitation for Bid

must be sent via e-mail to the buyer listed on the first page “Assigned Buyer” and be received at

least 10 Days prior to the Bid Submission Date. Please include the IFB Bid number (as

indicated on the title page) on all communications. Bidders may only communicate with the City

through the Assigned Buyer – communication with other City staff could result in disqualification.

4. Issuing of Addenda: The City may addend or amend its IFB at any time before the Bid

Submission Date. In addition to registering as a Bidder with the City, Bidders can check the

“Purchasing Bid Opportunities & Results” page on the City Website for the latest updates (linked

here). Any such amendments shall become a part of the Agreement. You must acknowledge

receipt of any Addenda or Amendments by writing in the issued Addenda numbers on Exhibit A –

Delivery and Pricing. City may reject any Bid that fails to acknowledge any Addenda or

Amendments.

5. Submission and Receipt of Bids: The City requires two completed Invitation for Bids: 1 Original

and 1 Copy. Each must be clearly labeled on the front sheet indicating “Original” or “Copy.” Use

the Bidder Checklist to ensure Your Bid includes all required components. If a copy on electronic

media is also required, the box below will be checked.

☐Electronic Copy also required.

Bids must be received no later than 5:00 PM (CST) on the Bid Submission Date (see first page)

and delivered to:

City of Tulsa - City Clerk’s Office

175 East 2nd Street, Suite 260

Tulsa Oklahoma 74103

Bids must be sealed and either mailed or delivered. The package, container, or envelope should

contain both of Your completed Bids, the original and the copy. Please use the provided label on

the last page of this IFB to clearly write the Bidder’s legal name and Bid number on the outside

of the package, container, or envelope. No faxed or emailed Bids will be considered.

Bids received after the stated date and time will not be accepted. The timestamp clock located

at the City Clerk’s Office on the second floor of City Hall at 175 East 2nd Street, Suite 260, Tulsa,

Oklahoma, 74103 is the City’s official bid clock for this IFB. Timeliness of Bid submittals will be

determined using only this clock.

IFB Rev 02/2024

This is the opportunity summary page. It provides an overview of this opportunity and a preview of the attached documentation.

Bid ID:	IFB 26-836
Addendum:	1
Bid Due Date:	1/7/2026
Description:	Sleeves for Ductile and Cast-Iron Pipe
Bid Document:	IFB 26-836 Sleeves for Ductile and Cast-Iron Pipe Addendum 1.pdf
Attachments:

Sleeves for Ductile and Cast-Iron Pipe

Attachment Preview

See also