| Location: | Kentucky |
|---|---|
| Posted: | Oct 21, 2025 |
| Due: | Oct 27, 2025 |
| Agency: | State Government of Kentucky |
| Type of Government: | State & Local |
| Category: |
|
| Solicitation No: | RFB-758-2600000146-1 |
| Publication URL: | To access bid details, please log in. |
Description: Disaster Aid Services
Department: Office Of The Controller
Buyer: Vivianne Leonard
Solicitation Number: RFB-758-2600000146-1
Type: Request for Bids (RFB)
Category: Vehicles
Closing Date and Time: 10/27/2025 01:30 PM EDT
| Line Number | Commodity Description | Details | Requested | |
|
1
|
GVWR: Approximately 48,800 lbs.
PAYLOAD CAPACITY RATING: Minimum 40,000 lbs.
DECK LENGTH: Minimum 20' flat deck length.
DECK HEIGHT: Unit shall have an empty deck height of 36"
OVERALL LENGTH: Maximum 32'
OVERALL WIDTH: Approximately 102" with wide track axles.
DOUBLE-BREAK BEAVERTAIL: Unit shall be fabricated with a 5' double-break beavertail, self-cleaning with angle turned upright.
RAMPS: Two (2) each 21" x 60" minimum, adjustable bi-directional spring assist ramps with self-cleaning angle, turned upright, and tapered tread-plate ends. Ramps preferred to have a 15-degree approach to double break beavertail and fabricated in such a manner for individual ease of operation. Ramps shall fold over securely on beaver-tail when in transport.
AXLES: Unit shall be equipped with dual Dana or Dexter 22,500 lb. capacity axles, oil bath hubs with Stemco seals or equal.
BRAKES: Air operated both axles, cam type brakes meeting the requirements of FMVSS121. Unit shall have a two-line system consisting of a service/control and emergency/supply line with a breakaway feature and Full ABS Modulation, conforming to DOT specifications. System shall include all necessary tubing, glad hand connectors with weather tight covers, air reservoirs, emergency valve, drain cocks, automatic slack adjusters and glad hand protectors.
PARKING BRAKES: Unit shall have a spring applied/air release braking system and shall be installed on both axles.
WHEELS: Trailer shall have eight (8) each 215/75R x 17.5 H tubeless radials mounted on steel wheels.
DECKING: Minimum 2" hardwood deck lumber.
TIE-DOWNS: Unit shall have minimum ten (10) D-Rings, four (4) each located on left and right sides of trailer, and two (2) each located at front. D-Rings to have a minimum 5/8" diameter cross-section.
HITCH: Unit shall have four (4) position adjustable pintle hitch.
JACK: Minimum 25,000-pound 2 speed, crank style jack.
SAFETY CHAINS: Two (2) high tensile safety chains with " diameter cross section and locking hooks shall be provided. Chain attachment must conform to S.A.E. standards.
ELECTRICAL EQUIPMENT: Trailer shall meet all S.A.E., I.C.C. and D.O.T. regulations. Trailer shall be equipped with sealed wiring harness and lighting. A wiring diagram shall be provided. All lights shall be LED type. Stop, turn and taillights shall be Model 44, 4" diameter, LED lighting by Truck-Lite Co., Inc. or equal. All lights are to be rubber mounted recessed in the frame of the trailer and be plug-in type (splice type wiring and lights are not acceptable). Taillights and turn signals to meet I.C.C. regulations. A minimum of four (4) feet of cable and a 7-pole male socket connector meeting J560B shall be provided for connection to the towing vehicle (This will require separate lights for stop lights and turn signals). Please refer to the attached trailer pole socket wiring diagram that is used on DOE trucks.
TOOL STORAGE: Prefer locking box in tongue area. If locking box is not available, a lockable box must be provided.
SIDE STEPS: Prefer one (1) each located on left and right sides of trailer.
PAINT: Unit shall be painted a standard O.E.M. production BLACK lead-free acrylic enamel. A minimum or two coats of primer and paint shall be applied.
|
Specifications
Commodity Code
073
|
Quantity
0.00000
Unit of Measure
EA
Delivery Date
-
|
View Purchase History
Additional Information
|
|
2
|
Tongue/Drawbar - 6' Continuation of Mainframe - 3" Eye 4 Position One Piece Frame.
Pintle Hitch Setting - 32" Adjustable.
Landing Gear Twin - Two Speed - 50,000 Lbs.
Toolbox In Gooseneck - Tool Tray in Tongue/Gooseneck.
Safety Chains - Standard.
Main Deck - One Piece Main Frame 14" Wide X 26# A572 Grade 50 Steel High Tensile. Cross Members 6" IBeams X 3.7 Lbs. Per Ft. Side Rails C8" X 11.5 Lbs. Per Ft 1 1/2" Nominal Apitong Decking, Flat Deck Design with Beavertail and Ramp Off the Rear.
Loaded Deck Height - 33".
Deck Length - 24'.
Deck Width - 8' 6" Wide.
Main Deck Flooring - Covered 1 1/2" Nominal Apitong.
Dovetail - 5' Self Cleaning - Double Break.
Rear Loading Ramps - Spring Assisted 72" X 24" Lay Flat Self Cleaning.
Axles - (3) 22,500 Lb Capacity, Air Brakes, Auto Slack, ABS.
Axle Spacing - 49".
Suspension - Spring with Front Air Lift.
Brakes - 12 1/4" X 7 1/2" Spring Brakes - 2 Axle.
Tires - (12) 215/75R17.5.
Wheels - (12) Steel Disc Wheels.
Electrical - Fully Sealed Wiring Harness with LED Lights, Marker Lights and Mid-Turn Signals, (3) Oval Stop, Tail and Turn Lights Per Side on Rear.
Strobe - No Amber Strobes.
Metal Prep - White Blasted and Cleaned Prior To Painting.
Primer - PPG 2-Part Primer.
Paint - 2-Part PPG Black Acrylic Urethane.
Load Securement - 12 Bent D' Rings, 2 Extra Welded Front Top of Deck.
Spare Tire and Mount - None.
Sidestep - Drivers Side.
|
Specifications
Commodity Code
073
|
Quantity
0.00000
Unit of Measure
EA
Delivery Date
-
|
View Purchase History
Additional Information
|
|
3
|
Additional deck length in 1' increments to trailer described in Commodity Lines 1 and 2.
|
Specifications
Commodity Code
073
|
Quantity
0.00000
Unit of Measure
EA
Delivery Date
-
|
View Purchase History
Additional Information
|
|
4
|
Increase the axle to 25,000 lbs. per axle in lieu of 20,000 lbs. per axle of unit described in Commodity Lines 1 and 2. Cross members will be increased 6" and springs to be upgraded.
|
Specifications
Commodity Code
073
|
Quantity
0.00000
Unit of Measure
EA
Delivery Date
-
|
View Purchase History
Additional Information
|
|
5
|
25-foot deck plus 5-foot dovetail
Pressure Treated Lumber Deck
95-115 inches overall width
Two heavy duty flip down ramps with spring assist
GVWR of 22,000# to 26,000#
Payload of 17,000# to 22,000#
Tandem Dual axles with electric over hydraulic oil bath brakes
Heavy Duty Jack/Landing Gear
Heavy Duty Rub Rail
Stake Pockets
Pipe Chain Spools between Stake Pockets
Break-A-Way System with Charger
2-Full Size Mounted Spare Tire & wheels
Powder coated frame
Features:
- Front Tool Box
- 12,000lb Warn Winch Mounted in Front Tool Box
- Large 12v Battery mounted in Front Tool Box
- Two Under Mount Tool Boxes
- Minimum of 24" of length
- Mounted under trailer deck
- Steps at the front of trailer on both sides
- Handrails mounted to neck upright of trailer near steps
- Mud Flaps
- DOT Reflective Tape
Electrical:
- LED trailer lights including brake, turn signal, reverse, and side marker lights
- 24-48" LED Light bar mounted to neck backwards to light up trailer deck
- 7-way round plug
|
Specifications
Commodity Code
073
|
Quantity
0.00000
Unit of Measure
EA
Delivery Date
-
|
View Purchase History
Additional Information
|
|
6
|
Length: 25' flat with 5' dovetail; Width: 102"
Dual Tandem (8 wheels)
2 Axles: Minimum 12,000lb Oil Bath with Electric Brakes
GVWR: At least 24,900 pounds, not to exceed 26,000lbs
Mainframe & Neck: Minimum 12" x 19# I-Beam
Minimum 25,000lb coupler with 2-5/16" ball
Min. 3" Crossmembers
2 heavy duty Flip-over 5' dovetail ramps with spring assist
Radial Tires, Min. 16", Load range E
Safety steps on each side with handles
Deck height
|
Specifications
Commodity Code
073
|
Quantity
0.00000
Unit of Measure
EA
Delivery Date
-
|
View Purchase History
Additional Information
|

With GovernmentContracts, you can: