| Location: | Delaware |
|---|---|
| Posted: | Sep 18, 2026 |
| Due: | Oct 22, 2026 |
| Agency: | State Government of Delaware |
| Type of Government: | State & Local |
| Category: |
|
| Solicitation No: | DTCC2711-LAWN |
| Publication URL: | To access bid details, please log in. |
9/18/2026
10/22/2026 at 1:00 PM Local Time
|
Supporting Bid Documents |
| RFP - Materiel and Nonprofessional Services |
| Appendix B |
| - Deadline to Respond - |
|---|
| October 22, 2026 |
| 1:00 PM (Local Time) |
STATE OF DELAWARE
Delaware Technical and Community College
State of Delaware
Collegewide Lawncare Services
Request for Proposal
Contract No. DTCC2711 - LAWN
September 18, 2026
- Deadline to Respond -
October 22, 2026
1:00 PM (Local Time)
2
STATE OF DELAWARE
Delaware Technical and Community College
CONTRACT NO. DTCC2711-LAWN
ALL VENDORS:
The enclosed packet contains a "REQUEST FOR PROPOSAL" for DTCC2711-LAWN: Collegewide Lawncare
Services. The proposal consists of the following:
Contents:
I. INTRODUCTION
II. SCOPE OF WORK
III. FORMAT FOR PROPOSAL
IV. PROPOSAL EVALUATION PROCEDURES
V. MANDATORY PREBID MEETING
VI. DEFINITIONS AND GENERAL PROVISIONS
VII. PROPOSAL REPLY SECTION
ATTACHMENTS
Appendix A - STATEMENT OF WORK AND TECHNICAL SPECIFICATIONS
Appendix B - PRICING FORMS
** Ctrl+Click on the headings above will take you directly to the section.
To be considered, all Proposals must be submitted as outlined in this RFP. The State reserves the right to reject
any Proposals that is determined to be non-responsive or non-conforming.
Please review and follow the information and instructions contained in the General Provisions and this Request for
Proposal (RFP). Should you need additional information, please call Courtney Stewart at 302-857-1658 or email
Courtney.stewart@dtcc.edu.
3
STATE OF DELAWARE
Delaware Technical and Community College
I. INTRODUCTION
A. PURPOSE
The purpose of this Request for Proposal (RFP) is to obtain sealed proposals from qualified contractors to
provide lawn care, landscaping, grounds maintenance, and natural turf athletic field services for Delaware
Technical and Community College (the "College") at its various campus locations.
It is the goal of this Request for Proposal to identify a vendor(s) and execute a contract to provide lawn
care, landscaping, grounds maintenance, and natural turf athletic field services for Delaware Technical and
Community College at its various campus locations.
1. COMPETITIVE SEALED PROPOSAL
It has been determined by Delaware Technical and Community College, pursuant to Delaware Code
Title 29, Chapter 6924 (a) that this solicitation be offered as a request for competitive sealed
proposals because the use of competitive sealed bidding is not practical and/or not in the best interest
of the State. The use of competitive sealed proposals is necessary to:
* Use a contract other than a fixed-price type; or
* Conduct oral or written discussions with vendors concerning technical and price aspects of their
proposals; or
* Afford vendors an opportunity to revise their proposals through best and final offers; or
* Compare the different price, quality and contractual factors of the proposals submitted; or
* Award a contract in which price is not the determining factor.
2. CONTRACT REQUIREMENTS
This contract will be issued to provide lawn care, landscaping, grounds maintenance, and natural turf
athletic field services for Delaware Technical and Community College.
3. AGENCY USE CONTRACT
Pursuant to 29 Del. C. 6904(e) respectively, if no state contract exists for a certain good or service,
covered agencies may procure that certain good or service under another agency's contract so long
as the arrangement is agreeable to all parties. Agencies, other than covered agencies, may also
procure such goods or services under another agency's contract when the arrangement is agreeable
to all parties.
4. MULTIPLE SOURCE AWARD
The Agency reserves the right to award this contract to more than one vendor pursuant to 29 Del. C.
6926. The basis for such selection shall be: continuity of service, capacity during peak periods,
specialized needs, geographic coverage and/or proximity to campus locations, competitive pricing, and
emergency/short-notice needs.
5. POTENTIAL CONTRACT OVERLAP
Vendors shall be advised that Delaware Technical and Community College, at its sole discretion,
shall retain the right to solicit for goods and/or services as required by its agencies and as it serves
the best interest of Delaware Technical and Community College. As needs are identified, there may
exist instances where contract deliverables, and/or goods or services to be solicited and subsequently
4
| Activity | Due Date |
|---|---|
| RFP Availability to Vendors | September 18, 2026 |
| Non-Mandatory Pre-bid Campus Walk Thrus (optional opportunity for vendors to see the campuses) | |
| Stanton Campus | September 23, 2026 at 9 AM |
| Owens Campus (Georgetown) | September 28, 2026 at 9 AM |
| Terry Campus (Dover) | September 29, 2026 at 9 AM |
| George Campus (Wilmington) | September 30, 2026 at 9 AM |
| Written Questions Due No Later Than (NLT) | September 30, 2026 at 4:00 PM |
| Written Answers Due/Posted to Website NLT | October 9, 2026 at 4:00 PM |
| Proposals Due NLT | October 22, 2026 at 1:00 PM |
| Public Proposal Opening | October 22, 2026 at 1:00 PM |
| Proposal Evaluation/Presentations as required | TBD |
| Vendor Best & Final Discussions, as required | TBD |
| Contract Award | Will occur within 90 days of bid opening |
STATE OF DELAWARE
Delaware Technical and Community College
awarded, overlap previous awards. Delaware Technical and Community College reserves the right
to reject any or all bids in whole or in part, to make partial awards, to award to multiple vendors during
the same period, to award by types, on a zone-by-zone basis or on an item-by-item or lump sum
basis item by item, or lump sum total, whichever may be most advantageous to Delaware Technical
and Community College.
6. SUPPLEMENTAL SOLICITATION
Delaware Technical and Community College reserves the right to advertise a supplemental
solicitation during the term of the Agreement if deemed in the best interest of Delaware Technical and
Community College.
7. CONTRACT PERIOD
Each Vendor's contract shall be valid for a three (3) year period from January 1, 2027 through
December 31, 2029. Each contract may be renewed for three (3) one (1) year periods through
negotiation between the Vendor and Delaware Technical and Community College. Negotiation may be
initiated no later than ninety (90) days prior to the termination of the current agreement.
Delaware Technical and Community College reserves the right to extend this contract on a month-to-
month basis for a period of up to three months after the term of the full contract has been completed.
B. KEY RFP DATES/MILESTONES
The following dates and milestones apply to this RFP and subsequent contract award. Vendors are advised
that these dates and milestones are not absolute and may change due to unplanned events during the bid
proposal and award process.
Activity Due Date
RFP Availability to Vendors September 18, 2026
Non-Mandatory Pre-bid Campus Walk Thrus
(optional opportunity for vendors to see the
campuses)
Stanton Campus September 23, 2026 at 9 AM
Owens Campus (Georgetown) September 28, 2026 at 9 AM
Terry Campus (Dover) September 29, 2026 at 9 AM
George Campus (Wilmington) September 30, 2026 at 9 AM
Written Questions Due No Later Than (NLT) September 30, 2026 at 4:00 PM
Written Answers Due/Posted to Website NLT October 9, 2026 at 4:00 PM
Proposals Due NLT October 22, 2026 at 1:00 PM
Public Proposal Opening October 22, 2026 at 1:00 PM
Proposal Evaluation/Presentations as required TBD
Vendor Best & Final Discussions, as required TBD
Contract Award Will occur within 90 days of bid opening
C. INQUIRIES & QUESTIONS
We welcome your interest in working with us, and we will be pleased to answer any questions you may have
in formulating your response to this Request for Proposal.
5
STATE OF DELAWARE
Delaware Technical and Community College
All questions with regard to the interpretation of this solicitation, drawings, or specifications, or any other
aspect of this RFP must be received in writing by September 30, 2026 at 4:00 PM. All questions will be
answered in writing by October 9, 2026 at 4:00 PM and will be posted on https://bids.delaware.gov/ website.
All questions must make specific reference to the section(s) and page numbers from this RFP where
applicable. Oral explanations or instructions will not be binding.
D. RFP DESIGNATED CONTACT
All requests, questions, or other communications about this RFP shall be made in writing to Delaware
Technical and Community College. Address all communications to the person listed below;
communications made to other Delaware Technical and Community College personnel or attempting to
ask questions by phone or in person will not be allowed or recognized as valid and may disqualify the
vendor. Vendors should rely only on written statements issued by the RFP designated contact.
Courtney Stewart
Delaware Technical and Community College
Office of the President
100 Campus Dr. Building 1000
Dover, DE 19904
Courtney.Stewart@dtcc.edu
To ensure that written requests are received and answered in a timely manner, electronic mail (e-mail)
correspondence is acceptable, but other forms of delivery, such as postal and courier services can also
be used.
E. CONTACT WITH STATE EMPLOYEE
Direct contact with Delaware Technical and Community College employees other than the Delaware
Technical and Community College Designated Contact regarding this RFP is expressly prohibited without
prior consent. Vendors directly contacting Delaware Technical and Community College employees risk
elimination of their proposal from further consideration. Exceptions exist only for organizations currently
doing business in the Delaware Technical and Community College who require contact in the normal
course of doing that business.
II. SCOPE OF WORK
A. OVERVIEW
The Vendor(s) shall provide all equipment, materials and labor to supplement Delaware Technical and
Community College's need for DTCC2711 - LAWN: Collegewide Lawncare Services as described herein.
The contract will require the Vendor(s) to cooperate with the ordering agency to insure Delaware Technical
and Community College receives the most current state-of-the-art material and/or services.
B. BACKGROUND
Delaware Technical Community College is seeking qualified and experienced lawncare and grounds
maintenance contractors to provide reliable, professional, and cost-effective services at one or more College
locations. The College is committed to maintaining safe, attractive, and well-maintained grounds that support
the educational environment, enhance the appearance of its campuses, and provide an appropriate setting
6
STATE OF DELAWARE
Delaware Technical and Community College
for students, faculty, staff, visitors, and community members. Additional information about the College's
various campuses is available at the following link: https://www.dtcc.edu/our-campuses/.
C. STATEMENT OF NEEDS
Delaware Technical Community College requires qualified lawncare and grounds maintenance contractors
to provide comprehensive, dependable, and timely services at designated College facilities. The selected
contractor(s) shall maintain lawns, landscaped areas, and other designated grounds in a manner that
promotes safety, appearance, functionality, and the overall quality of the College's campuses.
The College's objective is to establish a pool of qualified lawncare and grounds maintenance contractors
capable of providing consistent, professional, responsive, and cost-effective services throughout the term of
the resulting contract(s). The College reserves the right to modify the frequency, location, and scope of
services as operational needs change, subject to the terms and conditions of the resulting contract(s).
D. DETAILED REQUIREMENTS
The technical requirements of this RFP are stated in Appendix A. Vendors must provide pricing for the items
listed in the Excel Spreadsheet, Appendix B.
III. FORMAT FOR PROPOSAL
A. INTRODUCTION
This section prescribes the mandatory format for the presentation of a proposal in response to this RFP.
Each Vendor must provide every component listed in the order shown in this RFP, using the format
prescribed for each component. A proposal may be rejected if it is incomplete or conditional.
B. PROPOSAL RESPONSE
The Request for Proposal may contain pre-printed forms for use by the vendor in submitting its proposal.
The forms required by this solicitation shall be considered mandatory, prevailing documents.
When preprinted forms are used, the forms shall contain basic information such as description of the item
and the estimated quantities and shall have blank spaces for use by the vendor for entering information such
as unit bid price, total bid price, as applicable.
The Vendor's proposal shall be written in ink or typewritten on the form provided, and any corrections or
erasures MUST be initialed by vendor's representative completing the bid submission.
If items are listed with a zero quantity, Vendor shall state unit price ONLY (intended for open end purchases
where estimated requirements are not known). The proposal shall show a total bid price for each item bid
and the total bid price of the proposal excluding zero quantity items.
Vendors' proposal must respond to each and every requirement outlined in the RFP criteria in order to be
considered responsive. Proposals must be clear and concise.
C. NON-CONFORMING PROPOSALS
7
STATE OF DELAWARE
Delaware Technical and Community College
Non-conforming proposals will not be considered. Non-conforming proposals are defined as those that do
not meet the requirements of this RFP. The determination of whether an RFP requirement is substantive or
a mere formality shall reside solely with Delaware Technical and Community College.
D. CONCISE PROPOSALS
Delaware Technical and Community College discourages overly lengthy and costly proposals. It is the
desire that proposals be prepared in a straightforward and concise manner. Unnecessarily elaborate
brochures or other promotional materials beyond those sufficient to present a complete and effective
proposal are not desired. Delaware Technical and Community College's interest is in the quality and
responsiveness of the proposal.
E. COVER LETTER
Each proposal will have a cover letter on the letterhead of the company or organization submitting the
proposal. The cover letter must briefly summarize the Vendor's ability to provide the services specified in
the RFP. The cover letter shall be signed by a representative who has the legal capacity to enter the
organization into a formal contract with Delaware Technical and Community College.
F. TABLE OF CONTENTS
Each proposal must include a Table of Contents with page numbers for each of the required components of
the proposal.
G. DESCRIPTION OF SERVICES AND QUALIFICATIONS
Each proposal must contain a detailed description of how the Vendor will provide the goods and services
outlined in this RFP. This part of the proposal may also include descriptions of any enhancements or
additional services or qualifications the Vendor will provide that are not mentioned in this RFP.
H. DISCOUNT
Vendors are invited to offer in their proposal value added discounts (i.e. speed to pay discounts for specific
payment terms). Cash or separate discounts should be computed and incorporated into unit bid price(s).
I. SAMPLES OR BROCHURES
Samples or brochures may be required by Delaware Technical and Community College for evaluation
purposes. They shall be such as to permit Delaware Technical and Community College to compare and
determine if the item offered complies with the intent of the specifications.
J. ACKNOWLEDGEMENT OF UNDERSTANDING OF TERMS
By submitting a bid, each Vendor shall be deemed to acknowledge that it has carefully read all sections of
this RFP, including all forms, schedules and exhibits hereto, and has fully informed itself as to all existing
conditions and limitations.
K. BID BOND REQUIREMENT
The Bid Bond requirement has been waived.
L. PERFORMANCE BOND REQUIREMENT
8
STATE OF DELAWARE
Delaware Technical and Community College
The Performance Bond requirement has been waived.
M. PROPOSAL SUBMISSION REQUIREMENTS & FORMAT
To be considered, all proposals must be submitted in writing and respond to the items outlined in this RFP.
Delaware Technical and Community College reserves the right to reject any non-responsive or non-
conforming proposals. Each proposal must be submitted with 4 paper copies and 1 electronic copy on
an USB drive. One of the copies shall be marked "Master Copy" and will contain original signatures in all
locations requiring a vendor signature. The remaining copies do not require original signatures. The USB
drive must also contain the completed Appendix B Excel sheets, in Excel format.
All properly sealed and marked proposals are to be sent to Delaware Technical and Community College and
received no later than 1:00 PM (Local Time) on October 22, 2026. The Proposals may be delivered by
Express Delivery (e.g., FedEx, UPS, etc.), US Mail, or by hand to:
Courtney Stewart
Delaware Technical and Community College
Office of the President
100 Campus Drive, Building 1000
Dover, DE 19904
Any proposal submitted by US Mail shall be sent by either certified or registered mail. Any proposal received
after the date and time deadline referenced above shall not be considered and shall be returned unopened.
The proposing vendor bears the risk of delays in delivery. The contents of any proposal shall not be
disclosed as to be made available to competing entities during the negotiation process.
Upon receipt of vendor proposals, each vendor shall be presumed to be thoroughly familiar with all
specifications and requirements of this RFP. The failure or omission to examine any form, instrument or
document shall in no way relieve vendors from any obligation in respect to this RFP.
Delaware Technical and Community College reserves the right to award the proposed contract to multiple
Vendors if the President of Delaware Technical and Community College determines that such an award
is in the best interest of Delaware Technical and Community College.
Vendors are directed to clearly print "BID ENCLOSED" and "CONTRACT NO. DTCC2711-LAWN" on
the outside of the bid submission package.
N. PROPOSAL EXPIRATION DATE
Prices quoted in the proposal shall remain fixed and binding on the bidder at least through June 30, 2027.
Delaware Technical and Community College reserves the right to ask for an extension of time if needed.
O. WITHDRAWAL OF PROPOSALS
A Vendor may withdraw its proposal unopened after it has been deposited, if such a request is made prior
to the time set for the opening of the proposal.
P. PROPOSAL MODIFICATIONS
9
STATE OF DELAWARE
Delaware Technical and Community College
Any changes, amendments or modifications to a submitted proposal requires that the original proposal be
withdrawn, prior to the time set for the submission of the proposal, and a new proposal submitted prior to
the deadline for submission of proposals.
Changes, amendments or modifications to proposals shall not be accepted or considered after the hour and
date specified as the deadline for submission of proposals.
Q. LATE PROPOSALS
Proposals received after the specified date and time will not be accepted or considered. To guard against
premature opening, sealed proposals shall be submitted, plainly marked with the proposal title, vendor name,
and time and date of the proposal opening. Evaluation of the proposals is expected to begin shortly after
the proposal due date. To document compliance with the deadline, the proposal will be date and time
stamped upon receipt.
R. ADDENDA TO THE REQUEST FOR PROPOSAL (RFP)
If it becomes necessary to revise any part of this RFP, revisions will be posted at
https://bids.delaware.gov/ . By submitting an offer to Delaware Technical and Community College,
vendors have acknowledged receipt, understanding and commitment to comply with all materials,
revisions, and addenda related to the Request for Proposal.
S. INCURRED EXPENSES
Delaware Technical and Community College will not be responsible for any expenses incurred by the
vendor in preparing and submitting a proposal.
T. ECONOMY OF PREPARATION
Proposals should be prepared simply and economically, providing a straight-forward, concise description
of the Vendor's offer to meet the requirements of the RFP.
U. DISCREPANCIES AND OMISSIONS
Vendor is fully responsible for the completeness and accuracy of their proposal, and for examining this
RFP and all addenda. Failure to do so will be at the sole risk of vendor. Should vendor find discrepancies,
omissions, unclear or ambiguous intent or meaning, or should any questions arise concerning this RFP,
vendor shall notify Delaware Technical and Community College's Designated Contact, in writing, of such
findings at least ten (10) days before the proposal opening. This will allow issuance of any necessary
addenda. It will also help prevent the opening of a defective proposal and exposure of vendor's proposal
upon which award could not be made. All unresolved issues should be addressed in the proposal.
Protests based on any omission or error, or on the content of the solicitation, will be disallowed if these
faults have not been brought to the attention of the Designated Contact, in writing, no later than ten (10)
calendar days prior to the time set for opening of the proposals.
V. EXCEPTIONS
Bidders may elect to take minor exception to the terms and conditions of this RFP by completing
Attachment 3. Delaware Technical and Community College shall evaluate each exception according to
the intent of the terms and conditions contained herein, but Delaware Technical and Community College
10
STATE OF DELAWARE
Delaware Technical and Community College
must reject exceptions that do not conform to State bid law and/or create inequality in the treatment of
bidders. Exceptions shall be considered only if they are submitted with the bid or before the date and time
of the bid opening.
Exceptions must be submitted utilizing Attachment 3 to be considered. Exceptions listed elsewhere
in the Vendor's proposal will not be considered. Delaware Technical and Community College maintains
sole discretion to reject any vendor exceptions that are submitted.
W. BUSINESS REFERENCES
Provide three (3) business references consisting of current or previous customers of similar scope and
value using Attachment 6. Include business name, mailing address, contact name and phone number,
number of years doing business with, and type of work performed. Personal references cannot be
considered.
X. DOCUMENT(S) EXECUTION
All vendors must complete and submit with its proposal the non-collusion statement that is enclosed with
this Request for Proposal labeled as Attachment 2. The awarded vendor(s) will be presented with the
contract form for signature and seal, if appropriate. Both of these documents shall be executed by a
representative who has the legal capacity to enter the organization into a formal contract with Delaware
Technical and Community College.
The State of Delaware requires a new vendor to complete the registration process through the Delaware
Supplier Portal at http://esupplier.erp.delaware.gov. Successful completion of this registration enables the
creation of a State of Delaware supplier record. The Taxpayer ID (SSN or EIN) and Applicant (supplier)
name are submitted to the Internal Revenue Service for "matching". If the Taxpayer ID and name do not
match, the vendor record cannot be approved.
It is the applicant's responsibility to select the appropriate 1099 Withholding Type and Class. If
incorporated, a business is not subject to 1099 reporting unless the business is providing legal or medical
services.
Any questions about completing this registration or specific comments about the registration, please
contact supplier maintenance by phone at 302-672-5000.
Y. SUBCONTRACTS
Subcontracting is permitted under this RFP and contract. However, every subcontractor shall be identified
in the Proposal using Attachment 7.
Z. CONFIDENTIALITY
Subject to applicable law or the order of a court of competent jurisdiction to the contrary, all documents
submitted as part of the vendor's proposal will be treated as confidential during the evaluation process.
As such, vendor proposals will not be available for review by anyone other than Delaware Technical and
Community College Proposal Evaluation Team or its designated agents. There shall be no disclosure of
any vendor's information until a fully executed contract is received unless such disclosure is required by
law or by order of a court of competent jurisdiction.
Delaware Technical and Community College is required to comply with the State of Delaware Freedom
of Information Act, 29 Del. C. 10001, et seq. ("FOIA"). FOIA requires that Delaware Technical and
11

With GovernmentContracts, you can:
Upcoming Purchases & Bid Solicitations Upcoming Purchases and Bid Solicitations Request For Proposals
Delaware River Port Authority
Bid Due: 11/18/2026
Bid Status Details forDHCI Fire Alarm System ReplacementOMB-MC3514000083 Important Specific Message MANDATORY PRE-BID
State Government of Delaware
Bid Due: 12/03/2026
Bid Information Bid Type Competitive Grant Bid Number RFA - Redding OST FY27
State government of Delaware
Bid Due: 11/19/2026
RFP DAR-2027-0518: Advancement CRM Platform, Implementation and Advisory Services The University of Delaware
University of Delaware
Bid Due: 11/18/2026