3M 401+ Masking Tape BPA
| Location: | Oklahoma |
|---|---|
| Posted: | Apr 16, 2026 |
| Due: | Apr 23, 2026 |
| Agency: | DEPT OF DEFENSE |
| Type of Government: | Federal |
| Category: |
|
| Solicitation No: | A25-025 |
| Publication URL: | To access bid details, please log in. |
APEX Accelerators are an official government contracting resource for small businesses. Find your local APEX Accelerator (opens in new window) for free government expertise related to contract opportunities.
APEX Accelerators are funded in part through a cooperative agreement with the Department of Defense.
The APEX Accelerators program was formerly known as the Procurement Technical Assistance Program (opens in new window) (PTAP).
- Contract Opportunity Type: Presolicitation (Original)
- Original Published Date: Apr 16, 2026 04:07 pm EDT
- Original Response Date: Apr 23, 2026 10:00 am EDT
- Inactive Policy: 15 days after response date
- Original Inactive Date: May 08, 2026
-
Initiative:
- None
- Original Set Aside: Total Small Business Set-Aside (FAR 19.5)
- Product Service Code: 8040 - ADHESIVES
-
NAICS Code:
- 325520 - Adhesive Manufacturing
-
Place of Performance:
Tinker AFB , OK 73145USA
**THIS IS THE PRE-SOLICITATION NOTICE. THE ACTUAL SOLICITATION WILL BE RELEASED AT A LATER DATE**
The Air Force intends to solicit the following supply:
The 76 AMXG/569 AMXS is requesting a five (5) year Blanket Purchase Agreement (BPA) for 3M 401+ masking tape.
The requested equipment description/specifications are outlined below.
a.Item one – Masking Tape 24mm (1 inch) x 55m (60 yards)
b.Item two - Masking Tape 48mm (2 inch) x 55m (60 yards)
c.Item three - Masking Tape 76mm (3 inch) x 55m (60 yards)
d.Item four – Masking Tape 12mm (1/2 inch) x 55m (60 yards)
All tapes listed in item two shall adhere to the following requirements:
a.Tape shall adhere to SAE AMS-T-21595 (formerly MIL-T-21595). Types 1,2
b.Tape shall be single-sided and have a natural/synthetic rubber adhesive blend
c.Tape backing shall be a crepe paper.
d.Tape shall have an Adhesive strength of 35oz/in- 50oz/in per ASTM D3330.
e.Tape shall have a minimum tensile strength of 24lb/in per ASTM D3759.
f.Tape shall have a minimum elongation of 14% per ASTM D3759.
g.Tape shall be capable of high temperature use and be rated for a minimum surface temperature of 249F for 30 minutes
h.Tape color shall be green.
Tape shall be delivered with a minimum of six (6) months of shelf life remaining.
Estimated Period of Performance: 5-year BPA
This is a small business set-aside
System for Award Management (SAM) is required to receive any award. Contractors can register electronically at https://www.sam.gov/portal/public/SAM/. The NAICS code for this requirement is 325520 with a size standard of 550 EMP.
Interested persons may identify their interest and capability to respond to the requirement by submitting a proposal. Electronic procedures will be used for this solicitation through Beta.sam.gov at https://sam.gov/content/home. No telephone requests. See Note 22. Authority is 10 USC 2304 (c)(1).
Foreign Participation: No
For further information contact:
Sheridan Robison
Contracting Officer
- CP 405 734 9107 3001 STAFF DR STE 2S76
- TINKER AFB , OK 73145-3303
- USA
- Sheridan Robison
- sheridan.robison@us.af.mil
- Apr 16, 2026 04:07 pm EDTPresolicitation (Original)
Related Document
| Sep 24, 2025 | [Sources Sought (Original)] Masking Tape |
With GovernmentContracts, you can:
- Find more opportunities and win more business
- Receive daily alerts for all new bid opportunities
- Get contract opportunities matched to your business
See also
...of Performance: 180 days ARO This is a small business set-aside System for ...
DEPT OF DEFENSE
Bid Due: 6/03/2026
...(CST). Contractors must have an active registration in the System for Award Management ...
DEPT OF DEFENSE
Bid Due: 6/05/2026