MOVE! Workbook fy26

Location:	Federal
Posted:	Oct 20, 2026
Due:	Oct 27, 2026
Agency:	U.S. Government Publishing Office
Type of Government:	State & Local
Category:	V - Transportation, Travel and Relocation Services
Publication URL:	To access bid details, please log in.

Attachment Preview

Specifications by PL

Page 1 of 8

Reviewed by SG

Jacket 441-255

Veteran Affairs

Requisition 6-00212/26

BID OPENING: Bids shall be opened virtually at 11 am Eastern Time (ET), on 10/27/26, at the U.S.

Government Publishing Office. All parties interested in attending the bid opening shall email

bids@gpo.gov one (1) hour prior to the bid opening date and time to request a Microsoft Teams live

stream link. This must be a separate email from the bid submission. The link will be emailed prior to the

bid opening.

BID SUBMISSION: Bidders must email bids to bids@gpo.gov for this solicitation. No other method

of bid submission will be accepted at this time. The jacket number and bid opening date must be

specified in the subject line of the emailed bid submission. Bids received after the bid opening date and

time will not be considered for award.

Note: The GPO 910 “BID” Form is no longer required; bidders are to fill out, sign/initial, as

applicable, and return page 8.

For information regarding the solicitation requirements prior to award please email Pamela Longshore at

plongshore@gpo.gov. For contract administration after award, contact Pamela Longshore at 202-512-

0098.

ADDITIONAL EMAILED BID SUBMISSION PROVISIONS: The Government will not be

responsible for any failure attributable to the transmission or receipt of the e-mailed bid including, but

not limited to, the following:

(1) Emails over 75 MB may not be received by GPO due to size limitations for receiving emails.

(2) The vendor’s email provider may have different size limitations for sending e-mail, however

vendors are advised not to exceed GPO’s stated limit. The bidder’s email provider may have

different size limitations for sending email; however, bidders are advised not to exceed GPO’s

stated limit.

(3) Illegibility of bid.

(4) When the email bid is received by GPO it will remain unopened until the specified bid

opening time. Government personnel will not validate receipt of the e-mailed bid prior to bid

opening. GPO will use the prevailing time (specified as the local time zone) and the exact time

that the e-mail is received by GPO’s email server as the official time stamp for bid receipt at the

specified location.

GPO CONTRACT TERMS: Any contract which results from this Invitation for Bid will be subject to

the applicable provisions, clauses, and supplemental specifications of GPO Contract Terms (GPO

Publication 310.2, effective December 1, 1987 (Rev. 01-18)) and GPO Contract Terms, Quality

Assurance Through Attributes Program for Printing and Binding (GPO Publication 310.1, effective May

1979 (revised 9-19)).

PREDOMINANT PRODUCTION FUNCTION: The predominant production function is offset printing.

This function may NOT be subcontracted. Contractors who subcontract this function will be declared not

responsible.

GPO QATAP (GPO Publication 310.1) – https://www.gpo.gov/docs/default-source/forms-and-

standards-files-for-vendors/qatap-rev-09-19.pdf.

QUANTITY: FIXED PRICE - INDEFINITE QUANTITY CONTRACT FOR COIL/SPIRAL BOUND

BOOKS.

Page 2 of 8

Jacket 441-255

QUOTATIONS: This is a fixed-price contract. The offeror submitting a response shall bid the maximum

quantity, inclusive of all costs (including non-reimbursable mail or freight, if applicable), that shall be

delivered to the Government per the specification requirements for a total of $222,200.00.

Quotations shall include the cost of all materials and operations for the total quantity ordered. Quotations

shall be prepared in conformance with the Schedule of Prices.

DETERMINATION OF AWARD: Award shall be made to the responsible offeror submitting a bid,

whose bid specifies the most copies to be delivered to the Government for an all-inclusive, fixed-price

total of $222,200.00. Offerors submitting responses to this solicitation shall submit a total quantity - for

the fixed price. In the event of a tie quantity, award shall be determined by the lowest, total per-unit price

after application of prompt payment discount and Buy American Act factoring (if applicable). In the event

there is still a tie, the contract will be awarded in accordance with the GPO Printing Procurement

Regulations, Chapter XII. Additionally, the bid shall include separate unit pricing for each additional 1000

copies.

SCHEDULE OF PRICES:

QUANTITY

Price

Total copies: __________ = $222,200.00.

A cost must be submitted for each additional per 1000 copies.

Additional per 1000 copies $____

If author's alterations are made during the proofing stage, the total quantity may be decreased in

accordance with the contractor's submitted additional rate to offset the cost of the author's alterations.

SUBMISSION OF QUOTES: Potential offerors shall email bid to bids@gpo.gov with the fixed price of

$222,200.00 plus the quantity that their company will produce for the fixed price. Additionally, a cost

must be submitted for each additional 1000 copies.

PRODUCT: Spiral Bound Workbook

TITLE: MOVE! Workbook fy26

QUANTITY: TBD Spiral Bound books.

TRIM SIZE:

Constructed size: 8-1/2 x 11” - collate Cover and Text, Spiral bind on 11” side.

Cover: 8-1/2 x 11”

Text: 8-1/2 x 11”

PAGES: 244 Pages plus a separate 2 piece cover.

GOVERNMENT TO FURNISH: via email and GPO File Sharing after award.

One (1) Purchase Order

One (1) PDF file for production.

One (1) PDF file of packing Label.

Contractor to download from GPO.gov:

GPO Form 892C (R. 12/17) Proofs.

Page 3 of 8

Jacket 441-255

GPO Form 917 (Certificate of Selection).

GPO Form 2678 (Departmental Random Copies-Blue Labels).

Contractor to download the Labeling and Marking Specifications form (GPO Form 905, R. 7-15) from

gpo.gov, fill in appropriate blanks, and attach to shipping containers.

CONTRACTOR TO FURNISH: All materials and operations, other than those listed under

“GOVERNMENT TO FURNISH,” necessary to produce the product(s) in accordance with these

specifications.

ELECTRONIC PREPRESS: Prior to image processing, the contractor shall perform a basic check

(preflight) of the furnished media and publishing files to assure correct output of the required

reproduction image. Any errors, media damage, or data corruption that might interfere with proper file

image processing must be reported to the contract administrator.

The contractor shall create or change any necessary trapping, set proper screen angles and screen

frequency, and define file output selection for the imaging device being utilized. Furnished files must be

imaged as necessary to meet the assigned quality level.

PROOFS:

E-MAIL PROOFS (indicate margins): CONTRACTOR MUST NOT PRINT PRIOR TO RECEIVING

AN "OK TO PRINT". One set of E-Mailed Electronic Page Proofs. Contractor to submit one “Press

Quality” PDF “soft” proof (for content only) using the same Raster Image Processor (RIP) that will be

used to produce the final printed product. PDF proof will be evaluated for text flow, image position, and

color breaks. Proof will not be used for color match.

E-Mailed proofs (marked with Jacket/Req. Number plus return name and E-Mail address) directly to the

Agency at eric.allen@va.gov, and cc: plongshore@gpo.gov. Contractor must call GPO Contract

Compliance Section at (202) 512-0520 immediately upon E-Mailing proof and immediately upon

receiving the returned proof (or OK E-Mail) back from the Department. Proof will be withheld not more

than (2) workdays from receipt at the Department to receipt in the contractor's plant.

AFTER EMAIL PROOFS APPROVAL

One (1) set of digital color content proofs for entire bound workbook. Direct to plate must be used to

produce the final product with a minimum of 2400 x 2400 dpi. Proof must be created using the same

Raster Image Processor (RIP) that will be used to produce the product. Proofs shall be collated with all

elements in proper position (not pasted up), imaged face and back, trimmed and folded to the finished

size of the product.

PLUS

One (1) set of inkjet proofs that are G7 profiled and use pigment-based inks. A proofing RIP that

provides an option for high quality color matching (such as Device Links Technology and/or ICC

Profiles Technology), and meets or exceeds industry tolerance to ISO 12647-7 Standard for Graphic

Technology (as of 3/19/09, and future amendments) must be utilized plus GRACoL 2006 Coated #1

specifications (CGATS TR006) must be achieved. Output must be a minimum of 720 x 720 dpi on a

GRACoL or SWOP certified proofing media. Proofs must contain the following color control strip to be

evaluated for accuracy: IDEAlliance ISO 12647-7 Control Strip 2009 or 2013(i1).

Page 4 of 8

Jacket 441-255

Proofs must contain color control bars (such as Brunner, GATF, GRETAG, or RIT) for each color of ink

on the sheet. Control bars must be placed parallel to the press’s ink rollers and must show areas

consisting of minimum 1/8 x 1/8 solid color patches; tint patches of 25, 50 and 75%; dot gain scale; and

gray balance patches for process color (if applicable). These areas must be repeated consecutively across

the sheet.

The make and model number of the proofing system utilized shall be furnished with the proofs. These

proofs must contain all elements, be in press configuration, and indicate margins. Proofs will be used for

color match on press. Direct to plate must be used to produce the final product with a minimum of 2400

x 2400 dpi.

Deliver one (1) of each proof via traceable means to: Covington, IN 47932 (Full residential address to be

provided upon award). Contractor must also notify the ordering agency/GPO with tracking information

on the same day that the proof ships/delivers via e-mail sent to eric.allen@va.gov, and cc:

plongshore@gpo.gov. The subject line of this message shall be "PROOF Notice for Jacket# 441-255,

Req# 6-00212/26". Proof will be withheld not more than (2) workdays from receipt in the department.

CONTRACTOR MUST NOT PRINT PRIOR TO RECEIVING AND "OK TO PRINT".

**AFTER THE PROOFS ARE APPROVED, CONTRACTOR CAN PRODUCE EVERYTHING BUT

FINAL BINDING.

PRIOR TO BIND SAMPLES: Prior to binding of the total production quantity, the contractor must

submit one fully completed advance sample copy for final approval. The contractor is cautioned that in

the event of rejection or alteration of the advance sample, the GPO will consider production costs only

up to and including printing. If the contractor continues production beyond copying without the approval

of the Agency, they do so at their own risk. Send one (1) sample via traceable means to: Covington, IN

47932 (Full residential address to be provided upon award). Contractor must call GPO Contract

Compliance Section at (202) 512-0520 immediately upon sending/delivering proofs and immediately

upon notification that the proofs are available for pickup at the department. Sample will be withheld not

more than 2 workdays from receipt in the department to when they are made available for pickup at the

department. CONTRACTOR MUST NOT BIND FULL ORDER PRIOR TO RECEIVING AN "OK TO

BIND ". After the sample is approved, the sample will not be returned and an approved to bind will be

given and production may start.

All samples shall be manufactured at the facilities in which the contract production quantities are to be

manufactured.

STOCK/PAPER: The specifications of all paper furnished must be in accordance with those listed herein

or listed for the corresponding JCP Code numbers in the “Government Paper Specification Standards No.

13” dated September 2019. https://www.gpo.gov/docs/default-source/forms-standards-pdf-

files/vol_13.PDF.

COVER:

JCP Code* L11, White No. 1 Gloss Coated Cover, Basis Size 20 X 26", Basis Weight, 80 lb.

TEXT:

JCP Code* A260, White Silk / Dull-Coated Text, Basis Size 25 X 38", Basis Weight, 70 lb.

DIGITAL PRINTING IS NOT ACCEPTABLE

Page 5 of 8

Jacket 441-255

Covers 1, 3 & 4 and 244 text pages print head-to-head in four color process, with type/rule matter, logos,

illustrations, photos, solids, screens and some type reversing out to appear white. Uncommon bleeds

throughout. Cover 2 is blank.

After printing, flood coat Covers 1 & 4 with a clear, non-yellowing satin aqueous coating.

WARRANTY: Contract Clause 15, "Warranty", of GPO Contract Terms (GPO Publication 310.2,

effective December 1, 1987 (Rev. 01-18)) is amended for the solicitation to the effect that the warranty

period is EXTENDED from 120 days to one calendar year from the date the check is tendered as final

payment. All other provisions remain the same.

BINDING: Collate covers and all text pages. Punch covers and text suitably along left 11" dimension and

bind with black plastic spiral binding (equal to plastikoil) of suitable size and capacity. Spiral bind with

5/8” setback for the binding. Publication must lie flat when open. Must ensure that no type matter will be

cut off by the coil binding.

PACKING / LABELING:

Noncompliance with the packing and marking instructions will be cause for the Government to take

corrective action in accordance with GPO Pub. 310.2. Label in accordance with GPO Contract Terms.

Contractor MUST use supplied VA packing/shipping labels.

Cartons not to exceed 30 pounds each when full.

No loose items in cartons are permitted. Include sufficient inner packaging in submitted price. Ensure

sufficient inner packaging to ensure no damage occurs during shipping.

At the Government’s option, any items damaged during production or shipping may be required to be re-

fulfilled in an expedited manner, including expedited handling, expedited production, and expedited

shipping. Or, contractor may be required to waive the cost of any items received in damaged condition.

Mark/label each shipping container with the Requisition No., Jacket number, and title, corresponding to

contents.

PALLETIZING: Contractor will be required to furnish pallets, for bulk shipments, in shipping

containers, when the containers fill two or more layers on the pallet. Palletize in accordance with GPO

Pub. 310.2.

QUALITY ASSURANCE LEVELS AND STANDARDS: The following levels and standards shall

apply to these specifications:

Product Quality Levels:

(a) Printing (page related) Attributes -- Level III.

(b) Finishing (item related) Attributes -- Level III.

Inspection Levels (from ANSI/ASQC Z1.4):

(a) Non-destructive Tests -- General Inspection Level I.

(b) Destructive Tests -- Special Inspection Level S-2.

Specified Standards: The specified standards for the attributes requiring them shall be:

This is the opportunity summary page. It provides an overview of this opportunity and a preview of the attached documentation.

MOVE! Workbook fy26

Attachment Preview

See also