60 Klbf Universal Test Machine

Active

Contract Opportunity

Model 68FM-300 Floor Mounted Materials Testing System, Force Capacity 300 kN (30,600 kgf, 67,500 lbf) Dual column �oor mounted electromechanical testing system including:1.        Integrated digital closed-loop control and data acquisition electronics including crosshead extension and load measurement channels (two optional strain channels can be added to software-based systems)2.        Automatic recognition and calibration of transducers3.        Pre-loaded balls crew drive and crosshead guidance system powered by a bush-less AC servomotor4.        Ergonomic handset with two programmable soft keys, start, stop and return functions, variable speed jog and specimen protection5.        User selectable system of units: SI, metric and US customary6.        Operator protects architecture7.        Auto positioning8.        Collision mitigation9.        Testing Speed Range 0.00005 to 560 mm/min (0.000002 in/min to 22 in/min)10.        Crosshead return speed 640 mm/min (25 in/min)11.        Type IIF LH (M48 x 2 threaded hole) base �tting12.        CE mark conformity10-Year Mechanical Systems Warranty        English language option        Tall Height Load Frame Support Base for Models 68FM-100 and 68FM-300 Load FrameHeight of testing platform is approximately 748 mm (29.4 in), which is 300 mm (11.8 in) over Standard Height. Provides shelf area with capacity rating of 100 kg 220 lbs. evenly distributed.        13.        1 Phase 208 VAC - North America Plug: NEMA L6-20P        Maximum Crosshead Travel: 1359 mm (53.5 in)Total System Height for Standard Base: 2287 mm (90 in) Total System Height for Tall Base: 2587 mm (101.9 in)        Horizontal test space 575 mm (22.6 in)System footprint (W x D): 1140 mm x 786 mm (44.8 in x 30.9 in)        No Pneumatic Air Control Kit        Static Load Cell: 300 kN (30,600 kgf, 67,500 lbf) - Type II        14.        Tension and Compression15.        Type IIF �tting (M48 x 2 LH threaded hole)16.        Bolt-on design with self identi�cation and electrical calibrationSystem installation and training Installation performed by an Instron factory and �eld trained Service Engineer Representative. The introduction system can be provided for up to 3 operators. For larger numbers of operators, Instron Training classes are recommended. Some or all the following activities will be performed subject to the system quoted and system con�guration:a.        Set up of systemb.        Safety awareness and general testing safety precautionsc.        Make all physical and electrical connections, except 3 phase power and waterd.        Mount, install and test all peripheral �xtures and transducers, environmental chambers, and any major accessories that are supplied with the systeme.        Check correct operation of the system.f.        Check correct operation of all electrical components and mechanical assemblies and transducers (where �tted)g.        Con�gure controller and test for correct operation including all adjustments and tuning (includes Console software for Dynamic systems)h.        General instruction associated with any hardware elements of the systemi.        Review basic operation manuals and any other related documentationj.        Calibration and veri�cation services are quoted separatelyk.        Basic System and Software instruction are quoted separately        System Warranty ServicesThe service and support agreement for this system while under warranty includes the following services during the �rst year of system ownership (see Instron Terms and Conditions for exact details, limitations and restrictions):a.        Parts, labor and travel for repair/replacement for covered items (as de�ned in terms and conditions)b.        Priority telephone support during normal business hours at our Norwood MA headquarters.c.        Direct Veri�cation Remindersd.        Software Update Noti�cationse.        Downloadable Software Updates via Instron Connect Software and Customer Portalf.        Online Access to Calibration Certi�cates and Service Historyg.        System Diagnostics via Instron Connecth.        Direct Screen Share with Voice via Instron Connecti.        Augmented Reality (AR) App Supportj.        AI-Driven Troubleshooting Tool via Mobile App and Instron Connect Portal        Instron Connect Agreement for New Systems or Software Upgrades/UpdatesInstron Connect includes several technologies that create a secure connection between the testing systems at your facility and Instron. Our problem-solving tools harness innovative technology to rapidly troubleshoot issues and answer your technical questions, increasing productivity, reducing risk and minimizing downtime.Through the Instron Connect Software, Customer Portal, Mobile App and AR Support Tool, you can:k.        Share your screen and system diagnostics data with Instron Technical Supportl.        Receive calibration and service agreement reminders through the Connect softwarem.        Send priority requests for technical support, calibration or on-site servicen.        Download software updateso.        Access calibration certi�cates and service historyp.        View your service agreementq.        Self-diagnose and solve your system issues with the InSkill AI troubleshooting tool and mobile appr.        Receive remote visual support through the AR Support Tool, bringing Instron?s technical support team eyes into your lab

Attachments/Links