Maintenance, Repair, and Preservation of TWR7&8
| Location: | Washington |
|---|---|
| Posted: | Jan 16, 2025 |
| Due: | Jan 31, 2025 |
| Agency: | DEPT OF DEFENSE |
| Type of Government: | Federal |
| Category: |
|
| Solicitation No: | N4523A25R1052 |
| Publication URL: | To access bid details, please log in. |
APEX Accelerators are an official government contracting resource for small businesses. Find your local APEX Accelerator (opens in new window) for free government expertise related to contract opportunities.
APEX Accelerators are funded in part through a cooperative agreement with the Department of Defense.
The APEX Accelerators program was formerly known as the Procurement Technical Assistance Program (opens in new window) (PTAP).
- Contract Opportunity Type: Presolicitation (Updated)
- Updated Published Date: Jan 16, 2025 02:17 pm PST
- Original Published Date: Jan 16, 2025 02:15 pm PST
- Updated Response Date: Jan 31, 2025 12:00 pm PST
- Original Response Date: Jan 31, 2025 12:00 pm PST
- Inactive Policy: 15 days after response date
- Updated Inactive Date: Feb 15, 2025
- Original Inactive Date: Feb 15, 2025
-
Initiative:
- None
- Original Set Aside: Total Small Business Set-Aside (FAR 19.5)
- Product Service Code: J019 - MAINT/REPAIR/REBUILD OF EQUIPMENT- SHIPS, SMALL CRAFT, PONTOONS, AND FLOATING DOCKS
-
NAICS Code:
- 336611 - Ship Building and Repairing
-
Place of Performance:
WAUSA
TWR-7
Length: 85 FT
Width: 21 FT 6 IN
Age: 16 YRS
Hull Type: Aluminum
Draft: 5 FT 8 IN
Full Displacement: 95 Tons
Light Load: 60 Tons
Scope Overview: Coordinate with the Contracting Officer, via the Contracting Officer’s Representative (COR) to have vessel delivered to the Contractor’s facility. Upon docking vessel, wash, and clean vessel. Remove all fendering and sweep blast clean and replace any broken or missing studs and related hardware, as well as doubler plating. Sweep blast and touch up underwater hull. Remove and Install new FWD escape hatches and gaskets. Open, clean and inspect all tanks and voids including fuel, CHT and potable water tanks. Touch up preservation of main deck and bulwarks and pilot house. Install new multi-cable penetrations in the pilot house overhead. Accomplish overhaul of bow thruster and related testing. Overhaul hydraulic steering rams and related testing. Remove, clean and inspect shafts and reinstall with new seals and bearings and accomplish related testing. Replace legacy low pressure air compressor and related piping system. Replace HVAC system and related piping. Clean and inspect main engine heat exchangers. Overhaul and test genset alternators. Flush, clean and inspect chill water piping. Replace hull valves with new. Undock the vessel. Conduct Sea trials. Arrange and coordinate the delivery of the vessel back to the Government with the Contracting Officer via the COR.
TWR-8
Length: 85 FT
Width: 21 FT 6 IN
Age: 16 YRS
Hull Type: Aluminum
Draft: 5 FT 8 IN
Full Displacement: 95 Tons
Light Load: 60 Tons
Scope Overview: Coordinate with the Contracting Officer, via the Contracting Officer’s Representative (COR) to deliver the vessel to the Contractor’s facility. Upon docking vessel, wash, and clean vessel. Remove all fendering and sweep blast clean and replace any broken or missing studs and related hardware, as well as doubler plating. Sweep blast and touch up underwater hull. Remove and Install new FWD escape hatches and gaskets. Open, clean and inspect all tanks and voids including fuel, CHT and potable water tanks. Touch up preservation of main deck and bulwarks and pilot house. Remove insulation and install new lagging and insulation in the pilot house overhead. Repair superstructure door and replace gasket and conduct operational test. Accomplish overhaul of bow thruster and related testing. Overhaul hydraulic steering rams and related testing. Remove, clean and inspect shafts and reinstall with new seals and bearings and accomplish related testing. Replace legacy low pressure air compressor and related piping system. Clean and inspect main engine heat exchangers. Overhaul and test genset alternators. Flush, clean and inspect chill water piping. Replace hull valves with new. Purchase and install new helm chair. Undock the vessel. Arrange and coordinate the delivery of the vessel back to the Government with the Contracting Officer via the COR.
The expected period of performance is scheduled to be 03 June 2025 to 21 November 2025.
- 1400 FARRAGUT AVE
- BREMERTON , WA 98314-5001
- USA
- Chloe Vernet
- chloe.b.vernet.civ@us.navy.mil
- Chris Davidson
- christopher.t.davidson7.civ@us.navy.mil
- Jan 16, 2025 02:17 pm PSTPresolicitation (Updated)
- Jan 16, 2025 02:15 pm PST Presolicitation (Original)
Related Document
| Jan 23, 2025 | [Presolicitation (Updated)] Maintenance, Repair, and Preservation of TWR7&8 |
| Feb 3, 2025 | [Solicitation (Updated)] Maintenance, Repair, and Preservation of TWR 7 and 8 |
| Feb 18, 2025 | [Solicitation (Updated)] Maintenance, Repair, and Preservation of TWR 7 and 8 |
| Feb 20, 2025 | [Solicitation (Updated)] Maintenance, Repair, and Preservation of TWR 7 and 8 |
| Mar 19, 2025 | [Solicitation (Updated)] Maintenance, Repair, and Preservation of TWR 7 and 8 |
With GovernmentContracts, you can:
- Find more opportunities and win more business
- Receive daily alerts for all new bid opportunities
- Get contract opportunities matched to your business