STATE OF LOUISIANA
Department of Transportation & Develop.
INVITATION TO BID
RESPONSES WILL BE
PUBLICLY OPENED
02/19/2026
10:00 AM CST
SUBMIT NON-ELECTRONIC RESPONSE TO:
PO BOX 94245
Vendor No.:___________________
Solicitation: 3000025885
Opening Date: 02/19/2026
Vendor Name and Address: (to be completed by Vendor)
RFx Number: 3000025885
Version: 1
Buyer: ADRIAN STALLONE
Buyer Phone: 225-379-1428
E-Mail: adrian.stallone@la.gov
Scheduled Begin Date:
Scheduled End Date:
T-Number:
Ship To Address:
Department of Transportation & Develop.
Eng&Op-Hammond/District62
685 N Morrison Blvd
Hammond, LA 70401
QUESTIONS TO BE COMPLETED BY VENDOR
1.______ Delivery will be made this number of days After Receipt of Order (ARO)
2.______ %discount for payment made within 30 days. Discounts for payment made in less than 30
days, of less than 1%, or applicable to an indefinite quantity contract will be accepted but will not be an
award consideration.
Required
NO
NO
Name of Solicitation: DOTD Arch Pipe & Bands(D62)
RFx text:
This is a request for sealed bids only. This is not an order. Please note the RFx number and bid
opening date on the outside of your bid envelope. Online vendor portal is NOT applicable.
Please print all attachments to ensure all documents related to the RFx are reviewed prior to bidding.
Bidders who are a Louisiana or foreign LLC or corporation should be appropriately registered with the
Louisiana Secretary of State. Website: www.sos.la.gov /Phone (225)925-4704.
Louisiana Standard Specifications for Roads and Bridges, 2026 Edition may be found at the following
link -
https://www.dotd.la.gov/about/office-of-project-delivery/engineering/publicati
ons-and-downloads/specifications-and-standards/specifications/
SPECIAL INSTRUCTIONS: Unit price bid must not exceed two digits to the right of the decimal point.
VENDOR TELEPHONE NUMBER:
EMAIL ADDRESS:
TITLE
DATE
Signature of Authorized Bidder
Name of Bidder
(Typed or printed)
Invitation to bid: 3000025885
Open Date: 02/19/2026
T-Number:
Bidder:
Page 2 of 11
Unit price submitted beyond two digits will be rounded off to the nearest second digit.
Should bid in correct unit of measure shown to be considered for award. Quote submitted in any other
unit of measure may not be considered.
Due to computerization, unit price must be submitted on bands. Award to be made to one successful
bidder meeting all requirements of bid. No split award will be considered.
NOTE: Vendor must notify Bryan Dedon at bryan.dedon@la.gov or (225)505-5853 two weeks prior to
fabrication and must also notify District prior to shipping.
All Gasket Material must be from an approved source listed on the Approved Materials List: Gasket
Materials for Culvert Pipe prior to bid opening, copy attached.
NOTE: All Pipe must have lifting lugs and all Bands must have 10" bolts.
Terms: _______________________________ Delivery: _______________________________
DELIVERY INSTRUCTIONS: Vendor must contact Michael Magee at (985)335-2582 at least
twenty-four (24) hours prior to delivery. Deliveries accepted Monday through Thursday, 7:00 AM to
3:30 PM except during holidays, weekends, or time of disaster. No Friday deliveries will be accepted.
PAYMENT: In an effort to increase efficiencies and effectiveness as well as be strategic in utilizing
technology and resources, DOTD strongly encourages vendors to participate in accepting Electronic
Funds Transfer (EFT) payments.
EFT payments are sent from the State's bank directly to the payee's bank each weekday. The only
requirement is that you have an active checking or savings account at a financial institution that can
accept Automated Clearing House (ACH) credit files and remittance information electronically.
Additional information is available at https://www.doa.la.gov/doa/osrap/vendor-information/ .
VENDOR REGISTRATION: Vendor registration should be completed in LaPac prior to bid
submission. This only applies to those vendors that have not registered in LaPac.
Vendor registration must be completed prior to award.
Receipt of a solicitation or award cannot be relied upon as an assurance of receiving future
solicitations. In order to receive e-mail notification of solicitations/awards from this office, you must
enroll in the proper category on LaPac at the following web site:
https://wwwcfprd.doa.louisiana.gov/osp/lapac/pubMain.cfm
MANUFACTURER/PLANT LOCATION: _________________________
GASKET MATERIAL SUPPLIER CODE: ________________
PRODUCT: ________________________
Invitation to bid: 3000025885
Open Date: 02/19/2026
T-Number:
Bidder:
Page 3 of 11
LINE
Description
Quantity
1 Product ID: 11618 Product Category:40142100
75
PIPE,CULV,MTL,ARCH,BC,21SX15R X_FT,_GA
BITUMINOUS COATED METAL CULVERT, 2 2/3 X 1/2 IN
CORRUGATION, 2026 LA STANDARD SPECS FOR
ROADS AND BRIDGES, SECTIONS 1007.1, 1007.2,
1007.7, AND 1007.8, GASKET MATERIAL MUST BE
FROM THE APPROVED MATERIALS LIST (AML) FOR
GASKET MATERIALS FOR CULVERT PIPE
12 Gauge
Three(3) Pieces @ 25 Ft. Each
Vendor Must Furnish Lifting Lugs
Unit Unit
Price
Extended
Amount
LF __________ ________________
2 Product ID: 11626 Product Category:40142100
60
PIPE,CULV,MTL,ARCH,BC,71SX47R X_FT,_GA
BITUMINOUS COATED METAL CULVERT, 2 2/3 X 1/2 IN
CORRUGATION, 2026 LA STANDARD SPECS FOR
ROADS AND BRIDGES, SECTIONS 1007.1, 1007.2,
1007.7, AND 1007.8, GASKET MATERIAL MUST BE
FROM THE APPROVED MATERIALS LIST (AML) FOR
GASKET MATERIALS FOR CULVERT PIPE
12 Gauge
Two(2) Pieces @ 30 Ft. Each
Vendor Must Furnish Lifting Lugs
LF __________ ________________
3 Product ID: 11629 Product Category:40142100
PIPE,CULV,MTL,ARCH,BC,87SX63R X_FT,_GA
50
LF __________ ________________
BITUMINOUS COATED METAL CULVERT, 3 X 1 IN
CORRUGATION, 2026 LA STANDARD SPECS FOR
ROADS AND BRIDGES, SECTIONS 1007.1, 1007.2,
1007.7, AND 1007.8, GASKET MATERIAL MUST BE
FROM THE APPROVED MATERIALS LIST (AML) FOR
GASKET MATERIALS FOR CULVERT PIPE
10 Gauge
Two(2) Pieces @ 25 Ft. Each
Vendor Must Furnish Lifting Lugs
4 Product ID: 11629 Product Category:40142100
PIPE,CULV,MTL,ARCH,BC,87SX63R X_FT,_GA
60
LF __________ ________________
Invitation to bid: 3000025885
Open Date: 02/19/2026
T-Number:
Bidder:
Page 4 of 11
LINE
Description
BITUMINOUS COATED METAL CULVERT, 3 X 1 IN
CORRUGATION, 2026 LA STANDARD SPECS FOR
ROADS AND BRIDGES, SECTIONS 1007.1, 1007.2,
1007.7, AND 1007.8, GASKET MATERIAL MUST BE
FROM THE APPROVED MATERIALS LIST (AML) FOR
GASKET MATERIALS FOR CULVERT PIPE
10 Gauge
Two(2) Pieces @ 30 Ft. Each
Vendor Must Furnish Lifting Lugs
5 Product ID: 11641 Product Category:40142100
PIPE BAND,F/CORRUGATED,ARCH,BC,87SX63R
BITUMINOUS COATED, 3 X 1 IN CORRUGATION, 2026
LA STANDARD SPECS FOR ROADS AND BRIDGES,
SECTIONS 1007.1, 1007.2, 1007.7, AND 1007.8
12 Gauge
Vendor Must Furnish 10" Bolts For Each Band
6 Product ID: 11630 Product Category:40142100
PIPE,CULV,MTL,ARCH,BC,112SX75R X_FT,_GA
BITUMINOUS COATED METAL CULVERT, 3 X 1 IN
CORRUGATION, 2026 LA STANDARD SPECS FOR
ROADS AND BRIDGES, SECTIONS 1007.1, 1007.2,
1007.7, AND 1007.8, GASKET MATERIAL MUST BE
FROM THE APPROVED MATERIALS LIST (AML) FOR
GASKET MATERIALS FOR CULVERT PIPE
10 Gauge
Two(2) Pieces @ 30 Ft. Each
Vendor Must Furnish Lifting Lugs
7 Product ID: 11642 Product Category:40142100
PIPE BAND,F/CORRUGATED,ARCH,BC,112SX75R
BITUMINOUS COATED, 3 X 1 IN CORRUGATION, 2026
LA STANDARD SPECS FOR ROADS AND BRIDGES,
SECTIONS 1007.1, 1007.2, 1007.7, AND 1007.8
12 Gauge
Vendor Must Furnish 10" Bolts For Each Band
Quantity
1
60
1
Unit Unit
Price
Extended
Amount
EA __________ ________________
LF __________ ________________
EA __________ ________________
Invitation to bid: 3000025885
Open Date: 02/19/2026
T-Number:
Bidder:
Page 5 of 11
LINE
Description
Quantity Unit
Unit
Price
Extended
Amount
8 Product ID: 57211 Product Category:40142100
75
PIPE,CULV,MTL,ARCH,BC,128SX83R X_FT,_GA
BITUMINOUS COATED METAL CULVERT, 5 X 1 IN
CORRUGATION, 2026 LA STANDARD SPECS FOR
ROADS AND BRIDGES, SECTIONS 1007.1, 1007.2,
1007.7, AND 1007.8, GASKET MATERIAL MUST BE
FROM THE APPROVED MATERIALS LIST (AML) FOR
GASKET MATERIALS FOR CULVERT PIPE
10 Gauge
Three(3) Pieces @ 25 Ft. Each
Vendor Must Furnish Lifting Lugs
9 Product ID: 57211 Product Category:40142100
60
PIPE,CULV,MTL,ARCH,BC,128SX83R X_FT,_GA
BITUMINOUS COATED METAL CULVERT, 5 X 1 IN
CORRUGATION, 2026 LA STANDARD SPECS FOR
ROADS AND BRIDGES, SECTIONS 1007.1, 1007.2,
1007.7, AND 1007.8, GASKET MATERIAL MUST BE
FROM THE APPROVED MATERIALS LIST (AML) FOR
GASKET MATERIALS FOR CULVERT PIPE
10 Gauge
Two(2) Pieces @ 30 Ft. Each
Vendor Must Furnish Lifting Lugs
10 Product ID: 57212 Product Category:40142100
3
PIPE BAND,F/CORRUGATED,ARCH,BC,128SX83R
BITUMINOUS COATED, 5 X 1 IN CORRUGATION, 2026
LA STANDARD SPECS FOR ROADS AND BRIDGES,
SECTIONS 1007.1, 1007.2, 1007.7, AND 1007.8
12 Gauge
Vendor Must Furnish 10" Bolts For Each Band
LF __________ ________________
LF __________ ________________
EA __________ ________________
This is the opportunity summary page. It provides an overview of this opportunity and a preview of the attached documentation.