WWYK210129 Repair Facility HVAC Control System, B2122

WWYK210129

Tinker AFB (TAFB) Oklahoma is soliciting a source’s sought to see if there are any contractors capable of completing the requirements found in the attached project Statement of Work (SOW) and drawings; TAFB Honeywell partner will be required at a minimum for SOW 4.2.1.3 .

If respondent is only capable of being a General Contractor, please provide your average percentage for Design, G&A, Overhead, Profit and Bonds; as well as a statement that Tinker Honeywell would be a required sub-contractor and an estimated percentage of how much of the required work would be required to be performed with Tinker Honeywell as your prime sub-contractor.

The work to be performed under the terms of this contract consists of furnishing all

design/engineering services, materials, labor, plant, tools, transportation, equipment, testing

services, quality control and incidentals required to accomplish the repair/replacement/addition

of the HVAC controls and change to a BACNet system in B2122 at Tinker Air Force Base (AFB),

Oklahoma (reference the project drawings for additional location information).

The Contractor shall perform a site investigation to verify existing conditions. If necessary,

additional as-built drawings are available from 72 ABW/CE - Engineering Support, located in

B400.

The Contractor shall be responsible for identifying the necessary logistical, architectural, and

structural work elements required to perform the work as described herein. Assemblies,

framework, fixtures, or apparatus not readily identified on the project drawings or this

Statement of Work (SOW) shall be provided by the Contractor as required for a complete, fully

operating, and functioning system or systems ready for use by the Government.

Information such as floor plan layouts and dimensions; structural, mechanical, and electrical

data; and location of underground utilities provided by the Government for existing and new

construction are based on available as-built documentation, field observation, and equipment

selected as design basis by the Government. This information is to be considered approximate

and shall be field verified by the Contractor.