RFB 199-25 Roof Replacement KCTCS - Hazard Community & Tech

***ONLY ONLINE BIDS WILL BE ACCEPTED FOR THIS RFB.*** *Emailed and hard copies delivered by any method WILL NOT BE ACCEPTED. *See attached document How to Respond to an Online Bid through the Kentucky Vendor Self Service site (updated).pdf. *Please enter contact person, phone number and email in the Comments Section. *Vendors should review and update, if necessary, all addresses and contact persons for their account prior to bid submission. This information will carry forward to a contract if awarded, therefore please ensure all information is correct. Item will include bridge design and fabrication of a 40 foot Rolled Girder Bridge - weathering steel with TL-1 design rated rail system. Length to be 40 feet (out to out of girders) and 24 feet in width between the two guardrails. Item shall include stay-in-place forms - deck driving surface will be completed by others.

Item will include bridge design and fabrication of a 40 foot Rolled Girder Bridge - galvanized with TL-1 design rated rail system. Length to be 40 feet (out to out of girders) and 24 feet in width between the two guardrails. Item shall include stay-in-place forms - deck driving surface will be completed by others.

Item will include bridge design and fabrication of a 40 foot Rolled Girder Bridge - weathering steel with TL-2 design rated rail system. Length to be 40 feet (out to out of girders) and 24 feet in width between the two guardrails. Item shall include stay-in-place forms - deck driving surface will be completed by others.

Item will include bridge design and fabrication of a 40 foot Rolled Girder Bridge - galvanized with TL-2 design rated rail system. Length to be 40 feet (out to out of girders) and 24 feet in width between the two guardrails. Item shall include stay-in-place forms - deck driving surface will be completed by others.

Item will include bridge design and fabrication of a 50 foot Rolled Girder Bridge - weathering steel with TL-1 design rated rail system. Length to be 50 feet (out to out of girders) and 24 feet in width between the two guardrails. Item shall include stay-in-place forms - deck driving surface will be completed by others.

Item will include bridge design and fabrication of a 50 foot Rolled Girder Bridge - galvanized with TL-1 design rated rail system. Length to be 50 feet (out to out of girders) and 24 feet in width between the two guardrails. Item shall include stay-in-place forms - deck driving surface will be completed by others.

Item will include bridge design and fabrication of a 50 foot Rolled Girder Bridge - weathering steel with TL-2 design rated rail system. Length to be 50 feet (out to out of girders) and 24 feet in width between the two guardrails. Item shall include stay-in-place forms - deck driving surface will be completed by others.

Item will include bridge design and fabrication of a 50 foot Rolled Girder Bridge - galvanized with TL-2 design rated rail system. Length to be 50 feet (out to out of girders) and 24 feet in width between the two guardrails. Item shall include stay-in-place forms - deck driving surface will be completed by others.

Item will include bridge design and fabrication of a 60 foot Rolled Girder Bridge - weathering steel with TL-1 design rated rail system. Length to be 60 feet (out to out of girders) and 24 feet in width between the two guardrails. Item shall include stay-in-place forms - deck driving surface will be completed by others.

Item will include bridge design and fabrication of a 60 foot Rolled Girder Bridge - galvanized with TL-1 design rated rail system. Length to be 60 feet (out to out of girders) and 24 feet in width between the two guardrails. Item shall include stay-in-place forms - deck driving surface will be completed by others.

Item will include bridge design and fabrication of a 60 foot Rolled Girder Bridge - weathering steel with TL-2 design rated rail system. Length to be 60 feet (out to out of girders) and 24 feet in width between the two guardrails. Item shall include stay-in-place forms - deck driving surface will be completed by others.

Item will include bridge design and fabrication of a 60 foot Rolled Girder Bridge - galvanized with TL-2 design rated rail system. Length to be 60 feet (out to out of girders) and 24 feet in width between the two guardrails. Item shall include stay-in-place forms - deck driving surface will be completed by others.

Item will include bridge design and fabrication of a 70 foot Rolled Girder Bridge - weathering steel with TL-1 design rated rail system. Length to be 70 feet (out to out of girders) and 24 feet in width between the two guardrails. Item shall include stay-in-place forms - deck driving surface will be completed by others.

Item will include bridge design and fabrication of a 70 foot Rolled Girder Bridge - galvanized with TL-1 design rated rail system. Length to be 70 feet (out to out of girders) and 24 feet in width between the two guardrails. Item shall include stay-in-place forms - deck driving surface will be completed by others.

Item will include bridge design and fabrication of a 70 foot Rolled Girder Bridge - weathering steel with TL-2 design rated rail system. Length to be 70 feet (out to out of girders) and 24 feet in width between the two guardrails. Item shall include stay-in-place forms - deck driving surface will be completed by others.

Item will include bridge design and fabrication of a 70 foot Rolled Girder Bridge - galvanized with TL-2 design rated rail system. Length to be 70 feet (out to out of girders) and 24 feet in width between the two guardrails. Item shall include stay-in-place forms - deck driving surface will be completed by others.

Item will include bridge design and fabrication of a 80 foot Rolled Girder Bridge - weathering steel with TL-1 design rated rail system. Length to be 80 feet (out to out of girders) and 24 feet in width between the two guardrails. Item shall include stay-in-place forms - deck driving surface will be completed by others.

Item will include bridge design and fabrication of a 80 foot Rolled Girder Bridge - galvanized with TL-1 design rated rail system. Length to be 80 feet (out to out of girders) and 24 feet in width between the two guardrails. Item shall include stay-in-place forms - deck driving surface will be completed by others.

Item will include bridge design and fabrication of a 80 foot Rolled Girder Bridge - weathering steel with TL-2 design rated rail system. Length to be 80 feet (out to out of girders) and 24 feet in width between the two guardrails. Item shall include stay-in-place forms - deck driving surface will be completed by others.

Item will include bridge design and fabrication of a 80 foot Rolled Girder Bridge - galvanized with TL-2 design rated rail system. Length to be 80 feet (out to out of girders) and 24 feet in width between the two guardrails. Item shall include stay-in-place forms - deck driving surface will be completed by others.