SCHOFIELD BARRACKS BLDG. 6036 INSTALLATION OF TEN (10) NIPR DROPS

INSTALLATION OF TEN (10) NIPR DROPS AND ADDITIONAL TELCOM EQUIPMENT IN BLDG 6036 ON SCHOFIELD BARRACKS, HAWAII. SEE ATTACHED PWS FOR DETAILS. SITE VISIT SCHEDULED FOR 16 MAY 2025 @ 1PM BLDG 6036, SCHOFIELD BARRACKS, HAWAII.

FAR 52.237-1 SITE VISIT Offerors or quoters are urged and expected to inspect the site where services are to be performed and to satisfy themselves regarding all general and local conditions that may affect the cost of contract performance, to the extent that the information is reasonably obtainable. In no event shall failure to inspect the site constitute grounds for a claim after contract award.

1.1. INSTALLATION

1.2. The contractor will complete the following requirement(s) as stated below:

1. Ten (10) NIPR Data Ports shall be installed and labeled to provide connectivity to the designated workspace.

2. Electric Metallic Tubing (EMT) conduit shall be used for the cabling pathway up to the termination point (TO) and should have the capacity (up to 2 ½ inch trade size) to support the required number of Category 6 (CAT6) cabling.

3. Outdoor rated junction boxes shall be utilized for the cabling pathways where required.

4. Category 6 cabling shall be used from the Telecommunications Cabinet to the designated TOs.

5. Each CAT6 cable shall be labeled on the TO and the Copper Patch Panel (COPP).

6. Category 6 cabling shall be GREEN to adhere to the NEC’s coloring standard for data cabling.

7. A 6-port and 4-port faceplate configuration should be used for the termination points.

8. The next ten (10) consecutive available switchports should be utilized on the existing switch for uniformity.

9. Heavy Duty Cable Protector Ramps shall be provided and installed to protect the cable connecting the TOs to the end user workstation.

All proposals will be evaluated on the following criteria for technical acceptance.

• Detailed Scope of Work (SOW) of their proposed solution

• Engineered Drawing of their proposed solution (conduit, j-hook, TR location, drop location, etc.)

• Bill of materials (BOM) breakdown (manufacturer, part #, quantity, price)

• Labor breakdown (title, work hours, hourly rate, cost)

• Total cost (shipping, rental cost if any, misc., etc.)

Final deliverables must have 2 sets of hard copies to include cd’s of as-builts, test results, rack elevation drawing

• PDF or Auto Cad is acceptable for soft copies for review prior to final walkthrough

Contract will be awarded to lowest price technically acceptable (LPTA).

Any questions should be addressed to POC Alex Tangonan 808-787-4637.