Site Improvements At Peace & Plenty Park Addendum 4

Location: Rhode Island
Posted: Nov 6, 2026
Due: Nov 16, 2026
Agency: City of Providence
Type of Government: State & Local
Category:
  • Y - Construction of Structures and Facilities
  • Z - Maintenance, Repair or Alteration of Real Property
Publication URL: To access bid details, please log in.

Site Improvements At Peace & Plenty Park Addendum 4

Attachment Preview

Procurement #: 54798
CITY OF PROVIDENCE, RHODE ISLAND
Department: Parks
RFP Title: Site Improvements at Peace & Plenty Park
Opening Date: 16 Nov 2026
Addendum #: 4
Issuing Date: 6 Nov 2026
The purpose of this addendum is:
See attached
Providence City Hall
25 Dorrance Street
Providence, RI 02903

WENDY NILSSON BRETT P. SMILEY
Superintendent of Parks Mayor
Addendum # 4
Site Improvements at Peace & Plenty Park
November 6, 2026
Total Pages Including Cover (6 Pages)
Acknowledge Addenda on Bid Form
** BID DUE DATE Monday, November 16, 2026, AT 2:15PM **
Attachments:
1. Addendum Cover Sheet (1 Page)
Correction to the play equipment and model numbers listed in the Technical Specification
Section 116800 Play Field Equipment and Structures
2. Technical Specification Section 116800 Play Field Equipment and Structures (5 Pages)
PROVIDENCE PARKS DEPARTMENT
1000 Elmwood Avenue, Providence, RI 02905
Phone: 401-680-7201

Providence Parks Department 116800
Site Improvements at Peace & Plenty Park PLAY FIELD EQUIPMENT AND
STRUCTURES
SECTION 116800
PLAY FIELD EQUIPMENT AND STRUCTURES
PART 1 GENERAL
1.1 RELATED DOCUMENTS
A. Drawings and general provisions of the Contract, including General Requirements, apply to
this Section.
1.2 SUMMARY
A. Section includes playground equipment as follows:
1. Freestanding play ground equipment.
2. Composite playground equipment.
1.3 DEFINITIONS
A. Definitions in ASTM F1487 apply to Work of this Section.
B. IPEMA: International Play Equipment Manufacturers Association.
1.4 PREINSTALLATION MEETINGS
A. Preinstallation Conference: Conduct conference at Project site.
1.5 ACTION SUBMITTALS
A. Product Data: For each type of product.
B. Shop Drawings: For each type of playground equipment.
1. Include plans, elevations, sections, and attachment details.
2. Include fall heights and use zones for fitness equipment, coordinated with the critical-
height values of protective surfacing specified in Section 321816.13 "Playground
Protective Surfacing."
116800 - 1

Providence Parks Department 116800
Site Improvements at Peace & Plenty Park PLAY FIELD EQUIPMENT AND
STRUCTURES
C. Samples for Verification: For each type of exposed finish on the following products:
1. Include Samples of accessories to verify color and finish selection.
1.6 INFORMATIONAL SUBMITTALS
A. Qualification Data: For Installer, and Manufacturer.
B. Product Certificates: For each type of playground equipment.
C. Material Certificates: For the following items:
1. Shop finishes.
D. Sample Warranty: For manufacturer's special warranties.
1.7 CLOSEOUT SUBMITTALS
A. Maintenance Data: For playground equipment and finishes to include in maintenance manuals.
1.8 WARRANTY
A. Special Warranty: Manufacturer agrees to repair or replace components of playground
equipment that fail in materials or workmanship within specified warranty period.
1. Failures include, but are not limited to, the following:
a. Structural failures.
b. Deterioration of metals, metal finishes, and other materials beyond normal
weathering and use.
2. Warranty Period: from date of Substantial Completion.
PART 2 PRODUCTS
2.1 MANUFACTURERS
A. The following playground equipment and components shall have the IPEMA Certification
Seal:
B. Kompan Inc., Vendor Rep.: Jeffrey Hochwarter, 508-821-8715, JefHoc@kompan.com.
1. Three Bay Portal Swing w/ Bird's Nest, 2 Belt Seats and 2 Bucket Seats, Model
#KSW926-20519970
2. Sherpa, Model #PCE105131-0602
3. Combi 4, Model #FSW10402-20519961
116800 - 2

Providence Parks Department 116800
Site Improvements at Peace & Plenty Park PLAY FIELD EQUIPMENT AND
STRUCTURES
4. Junior Spica, Model #ELE400158-3517F, Color: Yellow
C. Landscape Structures Inc., Vendor Rep.: Meghan O'Brien, 508-359-4200,
MeghanO'Brien@obrienandsons.com.
1. Beachcomber, Model #CP018110 (Deliver & Install)
2. 4' ht. Double Wave Hillside Slide, with ramp deck extension and posts, Model
#MEO26077
D. Cre8Play: Ultiplay, Vendor Rep.: Jon Jalbert, 508.688.7007, jjalbert@ultiplayus.com.
1. Custom Sculpture Piece, Model #F001 (Deliver & Install)
2.2 PERFORMANCE REQUIREMENTS
A. Safety Standard: Provide playground equipment according to ASTM F1487 & ASTM F3101-
15.
2.3 MATERIALS
A. Steel: Material types, alloys, and forms recommended by manufacturer for type of use and
finish indicated, hot-dip galvanized.
B. Opaque Plastics: Color impregnated, UV stabilized, and mold resistant.
C. Suspension Cable: Manufacturer's standard hot-dip galvanized zinc-plated cable; with
commercial-quality, hot-dip galvanized or zinc-plated steel connectors and swing or ring
hangers.
D. Post Caps: Cast aluminum or color-impregnated, UV-stabilized, mold-resistant polyethylene
or polypropylene; color to match posts.
E. Platform Clamps and Hangers: Cast aluminum or zinc-plated steel, not less than 0.105-inch-
nominal thickness.
F. Hardware: Manufacturer's standard; commercial-quality; corrosion-resistant; hot-dip
galvanized steel and iron, stainless steel, or aluminum; of a vandal-resistant design.
G. Fasteners: Manufacturer's standard; corrosion-resistant; hot-dip galvanized or zinc-plated steel
and iron, or stainless steel; permanently capped; and theft resistant.
116800 - 3

Providence Parks Department 116800
Site Improvements at Peace & Plenty Park PLAY FIELD EQUIPMENT AND
STRUCTURES
2.4 CAST-IN-PLACE CONCRETE
A. Concrete Materials and Properties: Comply with requirements in Section 033000 "Cast-in-
Place Concrete" for normal-weight, air-entrained concrete with minimum 28-day compressive
strength of 4000 psi, 3-inch slump, and 1-inch- maximum-size aggregate.
B. Concrete Materials and Properties: Ready Mixed concrete or dry-packaged concrete mix
complying with ASTM C387/C387M and mixed at site with potable water, according to
manufacturer's written instructions, for normal-weight concrete with minimum 28-day
compressive strength of 4000 psi, 3-inch slump, and 1-inch- maximum-size aggregate.
PART 3 EXECUTION
3.1 EXAMINATION
A. Examine substrates, areas, and conditions, with Installer present, for compliance with
requirements for earthwork, subgrade elevations, surface and subgrade drainage, and other
conditions affecting performance of the Work.
1. Do not begin installation before final grading required for placing playground equipment
and protective surfacing is completed.
B. Proceed with installation only after unsatisfactory conditions have been corrected.
3.2 INSTALLATION
A. Comply with manufacturer's written installation instructions for each equipment type unless
more stringent requirements are indicated. Anchor playground equipment securely, positioned
at locations and elevations indicated.
1. Maximum Equipment Height: Coordinate installed fall heights of equipment with
finished elevations and critical-height values of protective surfacing. Set equipment so
fall heights and elevation requirements for age group use and accessibility are within
required limits. Verify that playground equipment elevations comply with requirements
for each type and component of equipment.
B. Post and Footing Excavation: Excavate holes for posts and footings as indicated in firm,
undisturbed or compacted subgrade.
C. Post Set with Concrete Footing: Comply with Section 033000 "Cast-in-Place Concrete"
ACI 301 for measuring, batching, mixing, transporting, forming, and placing concrete.
1. Set equipment posts in concrete footing. Protect portion of posts above footing from
concrete splatter. Verify that posts are set plumb or at the correct angle, alignment, height,
116800 - 4

Providence Parks Department 116800
Site Improvements at Peace & Plenty Park PLAY FIELD EQUIPMENT AND
STRUCTURES
and spacing.
a. Place concrete around posts and vibrate or tamp for consolidation. Hold posts in
position during placement and finishing operations until concrete is sufficiently
cured.
2. Embedded Items: Follow equipment manufacturer's written instructions and drawings to
ensure correct installation of anchorages for equipment.
3. Finishing Footings: Smooth top, and shape to shed water.
END OF SECTION
116800 - 5

This is the opportunity summary page. It provides an overview of this opportunity and a preview of the attached documentation.
Daily notification on new contract opportunities

With GovernmentContracts, you can:

  • Find more opportunities and win more business
  • Receive daily alerts for all new bid opportunities
  • Get contract opportunities matched to your business
ONE WEEK FREE TRIAL

See also

Info Opening Time Solicitation Number Status Bid Title Posting Group Posting Entity Contact

State Government of Rhode Island

Bid Due: 12/15/2026

Title Bid Number Opening Date Contact Person Contact expand_more Bid details FP System-Wide

Narragansett Bay Commission

Bid Due: 12/15/2026

Follow Increase Emergency Power Active Contract Opportunity Notice ID 36C24126Q0707 Related Notice Department/Ind.

VETERANS AFFAIRS, DEPARTMENT OF

Bid Due: 12/18/2026

Roger Williams Daycare Center Roof Replacement General Contractor Services Revised: 11/9/2023 BOARD OF

City of Providence

Bid Due: 12/14/2026

* Disclaimer: Information regarding bids, requests for proposals (RFPs), or requests for qualifications (RFQs) is provided on this website only for convenience and does not constitute official public notice. Persons wishing to respond to or inquire about bids, RFPs, or RFQs should contact the appropriate government department.