Chas Mar Pump Replacement

The proposed pumping station must be complete with hinged fiberglass housing and structural steel base suitable for installation on top of a 4¿- 0¿ inside diameter wet well opening. The principal items of equipment should include two vertical, close-coupled, vacuum-primed, 4¿, non-clog pumps, each capable of delivering 100 GPM at 90¿ TDH with a required static suction lift of 9.5¿, and each driven by 10 HP, 1800 RPM, 3 phase, 60 cycle, 230-volt motor; valves, 4¿ internal piping; central control panel with circuit breakers; motor starters and automatic pumping level controls; heater; priming pumps; ventilator, and all internal wiring. The station would need to be provided with 4¿ flanged suction connections and 4¿ plain-end discharge connection with compression coupling. Also included in the total bid price should be the entire cost of installation including any field labor, wiring, piping, and testing.