Agency: | Utah State University |
---|---|
State: | Utah |
Type of Government: | State & Local |
Category: |
|
Posted: | Mar 11, 2023 |
Due: | Mar 20, 2023 |
Solicitation No: | Sole Source |
Publication URL: | To access bid details, please log in. |
Bid # | Description | Closing Date & Time |
Sole Source |
Secondary Pad Cold Plate
The secondary pad cold plate is approximately 145x150x3 cm in dimension, and serves both structural and cooling functions. Structurally, it shall support and provide mounting for roughly 650lbs of electronic equipment above, and 850lbs of components and material below. The plate will be mounted to a semi-truck and shall resist large vibrational loads. Thermally, the pad shall remove approximately 2,300W of heat with an embedded liquid cooling system. The maximum temperature across most of the pad’s surface shall remain at 80°C or below, with specific temperature limits varying across the pad. The pad shall utilize a 50-50 mix of ethylene glycol and water coolant flowing at 10gpm and 10psi, with an inlet temperature of 65°C.
The vendor that has been identified for the fabrication of the secondary pad cold plate is Riverside Machine.
|
3/20/23
12p MST. |
With GovernmentContracts, you can:
Follow FA820324Q0003 Helical Spring, NSN: 5360016912952 Active Contract Opportunity Notice ID FA820324Q0003 Related
DEPT OF DEFENSE
Bid Due: 4/26/2024
Follow MIDS JTRS system is looking for some upgrades for the future capabilities
DEPT OF DEFENSE
Bid Due: 5/10/2024
Follow USACE SPK Design Bid Build (DBB) Construction - Defense Logistics Agency (DLA)
Federal Agency
Bid Due: 11/06/2024
Follow Snap-On Prolink Active Contract Opportunity Notice ID W911Y24R0012 Related Notice Department/Ind. Agency
DEPT OF DEFENSE
Bid Due: 5/08/2024