Vehicle Lifting Assembly Weight Testing and Certification

Active

Contract Opportunity

Naval Supply Systems Command (NAVSUP) Fleet Logistics Center (FLC) Norfolk Contracting Department, Norfolk VA, 23511-3392, intends to award a Firm-Fixed price contract in support of Navy Expeditionary and Logistics Support Group (NAVELSG). This acquisition will be conducted using the policies and procedures of FAR Part 12, Acquisition of Commercial Products and Commercial Services; and FAR Part 13, Simplified Acquisition Procedures. Please see attachments for further information. The associated NAICS code is 811310 with a small business size standard of $12,500,000.00. All responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency.

This requirement is to provide support by proof testing and certifying fourteen (14) vehicle lifting assemblies in accordance with customer requirements. The government will be responsible for delivery and pickup of the material at Contractor’s location.

Each assembly consists of (2) 9-5’ telescopic beams, (1) flounder/tow plate, (1) 2-1/2” 85T nut and bolt shackle, (2) 35T ‘Sling Saver” shackles, (8) 1-1/2” nut and bolt shackles, (4) 5’ eye-to-hook wire rope slings, (4) 10’ eye-to-eye wire rope slings, (4) 10’ eye-to-hook wire rope slings, and (4) 20’ eye-to-eye wire rope slings.

Contractor must provide certification proving that the pull test was performed, and tag each piece of the asseembly with one serial number unique to that assembly. The pieces of each assembly have to be rigged together and proof tested as a unit.Testing will be at 125% of rated capacity in accordance with NAVFAC P-307 requirments.

Upon Completion the NAVELSG point of contact will be notified to pickup assemblies from Contractor’s location.

In the event that one or several of these assemblies fail, the box that the particular assembly is transported in should be tagged in some way stating that the asset has failed it’s proof test. Even if one or several of the assemblies fail, they will still be transported back to Cheatham Annex where the government will then process them for disposal.

Place of Performance. Contractor’s location. Contractor’s location must be within a 60 mile drive from 593 Mayfield Street Williamsburg, VA 23185.

Deadline for questions is 25 FEB 2025, 1:00PM

*Amendment 0001 - Extends the solicitation to 05 March 2025 12:00PM to allow time to answer questions received. No further questions will be accepted.

*Amendment 0002 - Extends the solicitation to 07 March 2025 12:00PM and provides clarifications on questions recieved. No further questions will be accepted.

1. What is the testing weight?

A: The units must be tested fully assembled at 200% of it's WLL, 60,000LBS.

2. How large are each of the vehicle lift assemblies? We would like to determine how much space will be needed for storage.

A: The transport crates are 124"L x 40"W x 31.5"H and can be stacked 3 high.

3. Does the government plan on delivering all 14 units at once, or will they be dropped off individually based on the available storage space at our location?

A: The government can transport quantities to suit the contractors available storage.

*Ammendment 0003 Dissolves small business set-aside, updates clauses and provisions, updates period of performance, and extends the closing date and time

Site visits will not be permitted as the required services will take place at the contractors facility.

Attachments/Links